B-Line Eaton series utility enclosures, 36" height, 4" length, 36" width, 1, Hinged cover, TCS NK cabinet, Surface mounted, Medium double door, No kn

No. The 36364 TCS NK cabinet carries a NEMA 1 rating, which is indoor general-purpose only. It offers no protection against rain, hose-down, dust ingress or corrosive liquids. For an outdoor pole or pad location or a wet process area you need a NEMA 3R, 4 or 4X enclosure instead. NEMA 1 is fine for electrical rooms, mechanical spaces, back-of-house corridors and similar dry indoor locations.

36 inches high by 36 inches wide with a 4 inch depth. That shallow 4 inch back-to-front dimension matters: it suits terminal blocks, control wiring and flat-mounted components, but it will not swallow deep breakers, large contactors or bulky transformers. Check the deepest device you plan to mount plus wire bending space before you commit to a 4 inch cabinet.

Yes. The 36364 TCS NK is supplied with no knockouts, so every conduit entry is field-drilled or punched where you want it. That is the point of a no-knockout box on a utility or metering job, you locate entries to match the raceway run instead of working around factory holes. Budget for a knockout punch set and plan to reseal any paint you break through on the 12 gauge carbon steel.

It is a medium double door cabinet with a T-handle operating a 3-point latching mechanism, so the door pulls in at top, bottom and the handle point rather than at a single catch. The handle has key locking provisions, which is what you want on a utility or tenant-accessible space where you need controlled access. Doors hang on heavy-duty butt hinges and there is a card holder on the door for circuit or panel records.

The cabinet is built to UL 50, the standard covering enclosures for electrical equipment. That, along with the NEMA 1 rating, is what an inspector or a spec writer will be looking for on an indoor cabinet. It is manufactured in the US.

Body and cover are 12 gauge carbon steel, which is a heavy commercial gauge rather than the thinner sheet used on light-duty indoor boxes. Combined with the T-handle 3-point latch, key locking and heavy-duty butt hinges, it stands up to a mechanical room, utility closet or back-of-house corridor. It is still a NEMA 1 box, so use it indoors and dry.

Order it as B-Line 36364 TCS NK. The number reads out as the size and build: 36 inch height, 36 inch width, 4 inch depth, TCS cabinet, NK for no knockouts. Anyone quoting a TCS cabinet with factory knockouts is quoting a different part.

It is painted ANSI 61 grey, the standard light grey used across most commercial switchgear, panelboards and control enclosures. If your existing gear is ANSI 61, this drops in visually without repainting. If a facility has standardized on a custom color, plan on field finishing over the factory paint.