B-Line Eaton series vertical m...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7,584.29

B-Line Eaton series vertical meter pack, 100 A, 225 A, None, Ring type, 3R, Overhead/underground, ANSI 61 gray paint, 010 kAIC, Galvanized steel, Flus

(No reviews yet) Write a Review

Model: 2012 F
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7,584.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton B-Line series vertical meter pack, 100 A, 225 A, None, Ring type, 3R, Overhead/underground, ANSI 61 gray paint, 010 kAIC, Galvanized steel, Flush mount, 4, 2, 3

Manufacturer Resources

Product Specs

Amperage Rating:
100A
Certifications:
UL
Cover Door Type:
Ring
Degree Of Protection:
3R
Feed Type:
Overhead/underground
Interrupt Rating:
10 kAIC
Number Of Jaws:
4
Number Of Positions:
2
Number Of Wires:
3
Product Height:
34 in
Product Length Depth:
6 in
Product Weight:
64 lb
Product Width:
22 in
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE 2012 F – Frequently Asked Questions

1) How many meter positions does the Eaton B-Line 2012 F meter pack have, and what service does each socket accept?
The 2012 F vertical meter pack carries 2 meter positions. Each socket is a 4-jaw, 3-wire configuration, which is what you use for single-phase 120/240V residential-style metering on a duplex or small multi-family building. Each tenant position is rated 100 A. If your building has more than two tenants, you need a larger-position pack, not this one.
2) Can the B-Line 2012 F meter pack be installed outdoors?
Yes. It is built to a 3R degree of protection, which is the standard outdoor rainproof enclosure rating for service equipment on an exterior wall. Body is galvanized steel finished in ANSI 61 gray paint. It is UL listed.
3) What wall opening and clearance do I need for the 2012 F meter pack?
The enclosure measures 34 in high, 22 in wide and 6 in deep. It is a flush-mount unit, so the 6 in depth has to sit inside the wall cavity, which means a furred-out or masonry pocket rather than a standard 2x4 stud bay. It weighs 64 lb, so plan on two people or a lift to set it in the opening.
4) Is the 10 kAIC rating on this meter pack enough for my service?
The 2012 F is rated 10 kAIC. That covers most small residential and light commercial services fed from a modest utility transformer. If the utility or your engineer calls for a higher available fault current at the service point, this unit will not meet the spec and you need a higher-interrupting pack instead.
5) Does the 2012 F have a meter bypass for hot socket pulls?
No bypass. The 2012 F is a no-bypass pack, so power has to be dropped to change a meter safely. If your utility requires lever or horn bypass on multi-tenant metering, specify a bypass-equipped model instead of this one.
6) Does this meter pack work with an overhead service drop or an underground lateral?
Either. The 2012 F is built for overhead/underground feed, so the same unit can be fed from a service drop at the top or from a lateral coming up from below. That is a point worth confirming against your utility's service requirements before you set the can.
7) Is this a ring-type or ringless meter socket?
Ring type. The 2012 F uses a ring-style cover at each meter position, which is the sealing arrangement many utilities specify. Utilities are usually strict about ring versus ringless, so match this to what the serving utility accepts on your job.
8) How do I identify this Eaton B-Line meter pack when ordering?
Order it by catalog number 2012 F from Eaton's B-Line series. It is the 2-position, 100 A, 4-jaw 3-wire flush-mount vertical meter pack in a 3R enclosure with ring-type covers and no bypass.
How fast can I get the B-LINE 2012 F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 2012 F come with a warranty?
Absolutely. The B-LINE 2012 F is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 2012 F?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 2012 F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.