B-Line Eaton series wall mounted panel enclosure, 48" height, 10" length, 36" width, 4, Hinged cover, 43PT enclosure, Wall mount, Medium single door,

The 483610-43PT measures 48 inches high, 36 inches wide, and 10 inches deep. Those are the enclosure body dimensions, so plan panel backplate size and wall clearance around them. It is a medium single door style, meaning one door covers the full 48 x 36 opening, so allow door swing clearance to one side of the box.

It carries a NEMA 4 rating, which covers indoor or outdoor use with protection against windblown dust, rain, splashing water, and hose-directed water. The seal comes from a seamless poured in-place gasket behind the hinged cover. NEMA 4 is not a corrosion rating, so for salt spray or chemical exposure a stainless or 4X enclosure is the better call.

120.4 pounds empty, before any panel, breakers, or wiring go in. It hangs on external mounting feet, so the load lands on whatever the feet are anchored to. On block or concrete that is straightforward; on stud wall you want anchors landing in structure, not drywall alone, and a second set of hands to set it.

Yes. The door closes on a 3-point latching handle and the handle has a key lock padlock provision, so you can secure it with a padlock or key it. The 3-point latch pulls the door tight at top, bottom, and the latch point, which is what keeps gasket compression even across a 48 inch door.

External feet keep the enclosure wall unpierced, which is what preserves the NEMA 4 seal. Drilling mounting holes through the back of a gasketed enclosure defeats the rating. The trade-off is that the feet stand the box off the wall slightly and add a little to the overall footprint, so account for that if it is going into a tight alcove.

Carbon steel at 14 gauge, painted in ANSI 61 grey. That is the standard grey used across most industrial control gear, so it matches existing panels and disconnects on a typical plant or facility wall. If you are standardizing a facility, note the material is painted carbon steel, not stainless.

The 483610-43PT is the enclosure itself: 14 gauge carbon steel body, hinged gasketed door, 3-point latching handle, and external mounting feet. A back panel is ordered separately and sized to the 48 x 36 interior, so add it to the order along with any DIN rail, terminal kits, or window kits your build needs.

It is built to UL 50, the standard covering enclosures for electrical equipment, and country of origin is the US. For spec submittals on the 43PT, cite the UL 50 certification along with the NEMA 4 rating.

A hinged cover with a 3-point handle is what you want where the panel gets opened regularly for troubleshooting, resets, or metering, and where a 48 inch door would be awkward to lift off and set down. Screw cover enclosures seal just as well but are meant for boxes you close once and rarely revisit. At this size and weight, hinged is the practical choice.