B-Line Eaton series wall mounted panel enclosure, 36" height, 10" length, 30" width, 4, Hinged cover, 43PT enclosure, Wall mount, Medium single door,

It carries a NEMA 4 rating, which covers falling rain, splashing water, and hose-directed water, so it holds up outdoors and in washdown areas. The seal comes from a seamless poured in-place gasket around the hinged cover, and the box is UL 50 listed. If you need corrosion resistance in a chemical or salt environment, NEMA 4 carbon steel is not the same thing as a 4X stainless box.

36 inches high, 30 inches wide, and 10 inches deep, which is where the 363010 part of the model number comes from. That 10 inch depth is what decides whether your breakers, wireway, and door-mounted devices clear each other, so lay out the back panel against it before you commit.

84 pounds empty. That is a two-man lift on a wall, and it gets heavier once a back panel and gear go in. Plan on blocking or unistrut behind the drywall, or lag straight into structure. It hangs on external mounting feet, so the fasteners land outside the sealed body and you never breach the NEMA 4 envelope to mount it.

Yes on both. The door closes with a 3-point latching handle, which pulls the door tight at top, bottom, and the latch point so the gasket compresses evenly across a 36 inch door. The handle has a key lock and a padlock provision, so you can secure it with a facility padlock or the keyed handle.

The 43PT is supplied as a blank NEMA 4 box: hinged single door, poured gasket, 3-point handle, and external mounting feet. It is not pre-punched, which is what lets it hold the NEMA 4 rating out of the carton. Order the back panel separately sized to the 36 x 30 body, and use watertight hubs or sealing rings on any conduit entry you cut, or the rating is gone.

14 gauge carbon steel with a painted finish in ANSI 61 grey. Fourteen gauge is the usual commercial wall-box weight, stiff enough to carry a back panel and breaker gear without oil-canning, and it takes field drilling for conduit hubs cleanly with a knockout punch.

Only where washdown is water, not chemical. The 363010-43PT is NEMA 4 carbon steel with a painted finish, which handles rain and hose-directed water but has no 4X corrosion rating. For caustic washdown, food processing, or salt air, specify a 4X stainless or non-metallic box instead. Indoors on a mechanical room or utility wall, the painted 14 gauge steel is the right call.

Order Eaton B-Line part number 363010-43PT. The number reads as the size and style: 36 high, 30 wide, 10 deep, 43PT series, medium single door in ANSI 61 grey. Keeping that number on the facility standard means every replacement lands with the same 3-point handle, padlockable keyed latch, and mounting foot pattern as the ones already on the wall.

Country of origin is the US, which matters on government, school, and other publicly funded jobs carrying domestic sourcing language. It is also UL 50 listed, the enclosure construction standard inspectors look for on a panel box.