B-Line Eaton series wall mounted panel enclosure, 36" height, 8" length, 30" width, 4, Hinged cover, 43PT enclosure, Wall mount, Medium single door,

NEMA 4 is the rating on the 36308-43PT, so it handles falling rain, splashing water and hose-directed water. The seal comes from a seamless poured in-place gasket rather than a cut and glued strip, which is what keeps a hinged door watertight over repeated openings. It also carries UL 50 certification. For corrosive or washdown chemical areas you would want a stainless or NEMA 4X body instead, since this one is painted carbon steel.

The enclosure measures 36 inches high, 30 inches wide and 8 inches deep. Eight inches of depth is a working figure for a panelboard, small starter group or terminal blocks with a back panel behind them, but it gets tight once you add deep breakers plus wire bending space at the gutters. Lay out your deepest device plus the back panel standoff before committing to the 8 inch body.

It is a wall mount box with external mounting feet, meaning the feet sit outside the sealed volume so you drill nothing through the enclosure wall and the NEMA 4 seal stays intact. Empty weight is 78.7 lb, so anchor into studs, strut, or masonry with hardware rated for that plus the panel and conductors you install inside. Two people on the lift.

The door closes on a 3-point latching handle and the handle has a key lock padlock provision, so you can either key it or hang a padlock through it. Three-point latching pulls the door tight top, center and bottom, which is what maintains the gasket seal on a 36 inch tall door and makes it harder to pry.

Body and door are 14 gauge carbon steel, which is the standard industrial weight for a wall-mount box this size and stiff enough to hold the door flat against a poured gasket. Finish is painted in ANSI 61 grey, the usual gear grey, so it matches switchgear and control panels already in the room. Made in the US.

Go hinged when someone opens the box regularly, for troubleshooting, resetting, or metering. The 43PT is a hinged, single door medium enclosure with a 3-point handle, so it swings open and relatches without handling loose screws or losing the gasket compression. A screw-cover or bolted-cover box makes sense only where the enclosure is sealed once and rarely reopened.

No knockouts or hole patterns are part of the 43PT as described. NEMA 4 enclosures ship blank so the installer locates entries, and every penetration you cut has to be closed with a NEMA 4 rated watertight hub or fitting to keep the rating. Field-cut holes closed with standard locknut connectors will void the seal.

Order Eaton B-Line 36308-43PT. The number reads out the size: 36 inch height, 30 inch width, 8 inch depth, in the 43PT hinged single-door NEMA 4 family.