B-Line Eaton series wireway, 2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$332.46
B-Line Eaton series wireway, 2.5" height, 36" length, 2.5" width, HS wireway, Thru holes, 11 top knockouts, 11 bottom knockouts, Hinged cover, 1, Ste

B-Line Eaton series wireway, 2.5" height, 36" length, 2.5" width, HS wireway, Thru holes, 11 top knockouts, 11 bottom knockouts, Hinged cover, 1, Ste

(No reviews yet) Write a Review

Model: 2236 HS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$332.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series wireway, 2.5" height, 36" length, 2.5" width, HS wireway, Thru holes, 11 top knockouts, 11 bottom knockouts, Hinged cover, NEMA 1, Steel, Hinged, ANSI 61 gray, 16 gauge

Manufacturer Resources

Product Specs

Certifications:
CSA C22.2.
Closure Type:
Hinged
Finish Color:
ANSI 61 gray
Material Thickness:
16 gauge
Mounting Method:
Thru holes
Product Height:
2.5 in
Product Length Depth:
36 in
Product Weight:
6.879 lb
Product Width:
2.5 in
Special Features:
Cover is secured to the body with plated screws
Department:
Electrical
Product Type:
HS wireway
Product Details:
HS wireway
Product Length:
36 in

B-LINE 2236 HS – Frequently Asked Questions

1) What size wireway is the B-Line 2236 HS and how long is a stick?
It's a 2.5 x 2.5 inch cross section running 36 inches long. That's the smallest common lay-in trough size, so it suits short gutter runs between panels, control cabinets, or a row of disconnects where you only need to carry a modest bundle of conductors. Weight is about 6.879 lb per section.
2) Is the B-Line 2236 HS wireway rated for outdoor or wet locations?
No. It's a NEMA 1 enclosure, which is indoor general purpose only, protecting against incidental contact and falling dirt. For an exterior wall, a wash-down area, or anywhere water can hit it, you need a NEMA 3R or NEMA 4 raintight/watertight wireway instead.
3) Is a 2.5 inch square wireway big enough for my feeder pull?
A 2.5 x 2.5 inch trough gives roughly 6.25 square inches of interior area before deductions, and conductor fill in a wireway is limited to 20 percent of the cross section. That makes it a control and branch-circuit gutter, not a feeder trough. If you're pulling large feeders or splicing heavy conductors, step up to a 4 x 4 or 6 x 6 wireway.
4) Does the 2236 HS wireway cover hinge open, or do I have to lift it off?
Hinged cover. You swing it open to lay conductors in rather than lifting a screw-on cover free and balancing it, which matters in tight rooms and on overhead runs. The cover is secured to the body with plated screws once it's closed.
5) How many knockouts does this 36 inch B-Line wireway have and where are they?
Eleven knockouts along the top and eleven along the bottom of the 36 inch body, so you can drop conduit in and out at regular intervals down the run without drilling. Sides are not knocked out.
6) How does the 2236 HS wireway mount to a wall or backboard?
Through holes in the back of the trough, so it bolts flat to a wall, plywood backboard, or Unistrut with your own fasteners. Mounting hardware isn't part of the trough, so pick anchors to suit the substrate and the weight of the filled run (the empty section is about 6.879 lb).
7) Is this B-Line wireway approved for use on a job in Canada?
It carries CSA C22.2 certification, so it's recognized for Canadian installations as well as US work. Confirm the NEMA 1 indoor rating suits the location, since that's the limiting factor on where it can go, not the certification.
8) What do I order to extend a 2236 HS wireway run past 36 inches or turn a corner?
The 2236 HS is a straight 36 inch trough section only. To lengthen a run you add more 2.5 x 2.5 sections and join them with connectors; for direction changes you need matching 2.5 x 2.5 elbows, tees, or end plates from the same series. Fittings are separate items, so size them to the same 2.5 inch square cross section or they won't line up.
9) What gauge steel and what finish is the B-Line 2236 HS wireway?
16 gauge steel, painted ANSI 61 gray. That's the standard gray used on most switchgear and panelboards, so a run of this trough matches existing gear in a typical electrical room rather than standing out.
How fast can I get the B-LINE 2236 HS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 2236 HS come with a warranty?
Absolutely. The B-LINE 2236 HS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 2236 HS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 2236 HS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!