B-Line Eaton series wireway, 2.5" height, 60" length, 2.5" width, G NK wireway, Thru holes, No knockouts, Screw cover, 1, Steel, Plated screws, ANSI

No. The 2260 G NK is a NEMA 1 wireway, which is indoor general purpose only. It offers no protection against rain, dripping water, or washdown, so keep it inside dry areas. For an exterior run or a wet process area you need a NEMA 3R or NEMA 4 rated wireway instead.

It is a 2-1/2 by 2-1/2 inch trough in a 60 inch stick, so you are sizing your fill against a 2.5 inch square cross section. That is the smallest common gutter size, good for control and instrument wiring runs rather than large feeder bundles. Weight is 10.686 lb per length, light enough for one person to hang.

No knockouts. The 2260 G NK is the NK (no knockout) version, so every conduit entry gets field punched or drilled where you want it. If you would rather have factory openings on set centers, order the knockout version of the same 2.5 x 2.5 inch trough instead.

No. What ships is the 60 inch 2.5 x 2.5 inch trough with its screw cover and plated screws. Couplings to join sticks, end plates to close a run, and elbows or tees to turn corners are separate items, so add them to the order based on your layout before you start hanging.

It is a screw cover, secured with plated screws along the length. You take the whole cover off to lay conductors into the trough rather than fishing them, but it is not a hinged or quick-release lid, so plan on a screwdriver every time you open it. For a run you expect to revisit often, a hinged cover wireway is the easier choice.

Through holes in the back of the trough. You fasten it directly to the wall, backboard, or strut with your own bolts or lags; no mounting brackets or fasteners are supplied, so pick hardware to suit the substrate. At 10.686 lb per 60 inch stick before conductors, standard anchors into solid backing are enough.

It is CSA Certified. That covers Canadian jobs and is commonly accepted on specs calling for third party certified wireway. Steel construction in 16 gauge, NEMA 1 indoor rating.

Yes, that is the normal use for this size. The 2.5 x 2.5 inch trough gives you a continuous, accessible raceway to bring multiple conduit runs into a common path and make splices you can get back to by removing the screw cover. Because it is the no-knockout version, you locate each conduit entry exactly where the conduits land. Keep it to indoor dry locations given the NEMA 1 rating.

Finish is ANSI 61 gray, the standard gray used on most industrial control panels and enclosures, so a run of 2260 G NK wireway will read the same as existing switchgear and boxes in that color. Body is 16 gauge steel.