B-Line Eaton series wireway, 6" height, 48" length, 6" width, 4XSFW wireway, Wireway hanger, Hinged cover, 4X, 304 stainless steel, Seamless poured i

The 6648-4XSFW is a NEMA 4X wireway built in 304 stainless steel with a seamless poured-in-place gasket, so it's intended for wet, washdown, and corrosive environments such as food plants, car washes, and coastal exteriors. It also carries CSA C22.2 certification. If your run is indoor dry-location only, a painted NEMA 1 screw-cover wireway is the cheaper way to go.

It mounts by wireway hanger. The section is not intended to be through-bolted flat to a wall by itself, so plan on hangers at the spacing your run and fill require, plus couplings, elbows, and end plates as separate items. None of that is included with the trough.

16 gauge 304 stainless with a #4 brushed finish. The #4 brush is the standard architectural/sanitary finish, so it blends with stainless panels and equipment in food and pharma spaces and wipes down cleanly. A 48 inch section weighs about 22.663 lb, which is a one-man lift onto hangers.

304 is the grade here, and it handles washdown, humidity, and most food-processing chemistry. In constant chloride exposure, pool chemical rooms, or heavy marine salt spray, 316 stainless is the grade normally specified instead. The NEMA 4X rating covers water and corrosion resistance generally, not a specific chemical list.

No. The 6648-4XSFW uses a seamless poured-in-place gasket, formed directly on the cover as one continuous bead with no butt joint. That's the detail that keeps the 4X seal intact after repeated hinged-cover openings, which is where cut-and-glue gaskets usually fail first.