Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, combo opening, NEMA 1, Steel, ANSI 61 gray acrylic electrocoat , 8" X 8"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray acrylic electrocoat finish
- Product Height:
- 8 in
- Product Length Depth:
- 9.758 in
- Product Weight:
- 4.923 lb
- Product Width:
- 8 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, combo opening
- Product Details:
- 90° elbow, combo opening
- Product Material:
- Steel
- Product Length:
- 9.758 in
B-LINE 8845 HSLCOMBO – Frequently Asked Questions
1) Will the B-Line 8845 HSLCOMBO elbow fit 8 x 8 wireway?
Yes. The Eaton B-Line 8845 HSLCOMBO is sized for 8 inch by 8 inch lay-in wireway, with a product height of 8 inches and width of 8 inches. It turns a 90 degree corner in the run. If your trough is 4 x 4, 6 x 6, or 12 x 12, you need the elbow built for that cross section instead.
2) Is this wireway elbow rated for outdoor or wet locations?
No. The 8845 HSLCOMBO carries a NEMA 1 degree of protection, which is indoor, general purpose enclosure only, with no protection against water. For rooftop, exterior, or washdown runs you need a NEMA 3R or NEMA 4 rated wireway elbow.
3) What does "combo opening" mean on this 90 degree wireway elbow?
Combo opening means the elbow is built so it can serve more than one turn orientation, rather than being a dedicated left, right, or up-and-over fitting. That is the 8845 HSLCOMBO's product detail designation, so one part covers the combination openings instead of stocking separate elbow variants for each direction.
4) What is a lay-in wireway elbow used for instead of a conduit elbow?
A lay-in elbow lets you drop conductors into the open trough and then close the cover, rather than pulling wire through a closed 90 degree conduit bend. That is why panel shops and integrators run wireway for gutter and distribution work with many circuits. The 8845 HSLCOMBO is the lay-in type, so wiring goes in from the open side, not fished.
5) What material and finish is this 8 x 8 wireway elbow, and will it match my existing trough?
Steel, with an ANSI 61 gray acrylic electrocoat finish. ANSI 61 gray is the standard gray used across most Eaton B-Line wireway and enclosures, so a corner fitting will match existing gray trough and panel work rather than standing out.
6) What is the exact part number to order this B-Line 8 x 8 combo elbow?
Order Eaton B-Line part number 8845 HSLCOMBO. That is the 8 inch by 8 inch, NEMA 1, steel, lay-in 90 degree elbow with the combo opening.
How fast can I get the B-LINE 8845 HSLCOMBO delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 8845 HSLCOMBO come with a warranty?
Absolutely. The B-LINE 8845 HSLCOMBO is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 8845 HSLCOMBO?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 8845 HSLCOMBO from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.