You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, combo opening, NEMA 1, Steel, ANSI 61 gray painted finish, 12" X 12"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 12 in
- Product Length Depth:
- 16.09 in
- Product Weight:
- 17.299 lb
- Product Width:
- 12 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, combo opening
- Product Details:
- 90° elbow, combo opening
- Product Material:
- Steel
B-LINE 1212 L COMBO – Frequently Asked Questions
1) Will the B-Line 1212 L COMBO elbow fit 12 x 12 lay-in wireway?
Yes. The 1212 L COMBO is sized for 12 inch by 12 inch wireway, with a 12 inch height and 12 inch width at the openings, and it is a lay-in design so conductors drop in rather than being pulled through. Overall depth is 16.09 inches, which is the leg dimension you need clearance for at the turn.
2) Is this wireway elbow rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure rating, which is indoor, general purpose protection against incidental contact and falling dirt only. For a rooftop, washdown, or any damp or wet location you need a NEMA 3R or 4 rated wireway elbow instead. The 1212 L COMBO is UL Listed.
3) What does "combo opening" mean on this 90 degree wireway elbow?
Combo opening means the elbow's flanged openings accept either orientation of the run, so one fitting covers the turn instead of stocking separate left/right or flat/edge elbow versions. It is a 90 degree elbow for 12 x 12 lay-in wireway, so it makes a square change of direction in a straight run.
4) How much does the 12 x 12 wireway elbow weigh for overhead support planning?
17.299 lb bare. That is the fitting only, before conductors, so size your trapeze or strut supports at the turn for the elbow weight plus the fill and the adjacent section loads. Steel construction with an ANSI 61 gray painted finish.
5) Do I need a lay-in elbow or will a standard pull elbow work for a 12 x 12 gutter run?
A lay-in elbow like the 1212 L COMBO has a removable cover along the full length so large conductors can be set in place at the turn rather than pulled around a 90. On big feeder cable that is usually the difference between a workable pull and a fight. If your run is small conductors and you are pulling anyway, the lay-in feature matters less, but the fitting still has to match the 12 x 12 wireway size.
6) What finish does the B-Line 12 x 12 wireway elbow come in, and will it match my existing run?
Steel with an ANSI 61 gray painted finish, the standard gray used across Eaton B-Line wireway and most industrial control enclosures, so it matches straight sections and gutter already finished in ANSI 61 gray.
How fast can I get the B-LINE 1212 L COMBO delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1212 L COMBO come with a warranty?
Absolutely. The B-LINE 1212 L COMBO is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1212 L COMBO?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1212 L COMBO from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.