You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, sweep opening, NEMA 1, Steel, ANSI 61 gray painted, 10" X 10"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 10 in
- Product Length Depth:
- 14.09 in
- Product Weight:
- 12.358 lb
- Product Width:
- 10 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, sweep opening
- Product Details:
- 90° elbow, sweep opening
- Product Material:
- Steel
- Product Length:
- 14.09 in
B-LINE 1010 L SWEEP – Frequently Asked Questions
1) Will the B-Line 1010 L SWEEP elbow fit 10 x 10 wireway?
Yes. The 1010 L SWEEP is built for 10 inch by 10 inch lay-in wireway, with a 10 inch height and 10 inch width matching the trough cross section. It turns the run 90 degrees and measures 14.09 inches on the length/depth dimension, so allow for that reach off the corner when you lay out the run.
2) Is this Eaton B-Line elbow rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure rating, which is indoor, general purpose protection against incidental contact and falling dirt only. It has no gasketing for rain, washdown, or dust. For an exterior or wet run you need a NEMA 3R or 4 rated wireway and fittings instead.
3) What does "sweep opening" mean on this 90 degree wireway elbow, and why would I pick it?
A sweep opening elbow gives the conductors a gradual, radiused turn through the corner instead of a sharp square break. That protects insulation and makes it far easier to pull or lay large conductors around the 90, which is the reason installers choose a sweep over a standard square elbow on runs with big or stiff cable. The 1010 L SWEEP is the lay-in style, so the cover comes off and wire drops in rather than being fished through.
4) What finish does this come in, and will it match existing wireway on my job?
It is steel with an ANSI 61 gray painted finish, the standard gray used across Eaton B-Line wireway and most industrial electrical enclosures, so it matches straight runs, tees, and panels already in that color. If your existing trough is a different gray or a galvanized finish, it will not blend.
5) How heavy is this 10 x 10 wireway elbow for overhead support planning?
The elbow weighs 12.358 lb bare. Add conductor weight when you size hangers or trapeze supports at the corner, since a 90 with a sweep radius is a concentrated load point on the run.
How fast can I get the B-LINE 1010 L SWEEP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1010 L SWEEP come with a warranty?
Absolutely. The B-LINE 1010 L SWEEP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1010 L SWEEP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1010 L SWEEP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.