You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, sweep opening, NEMA 1, Steel, ANSI 61 gray painted
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 6 in
- Product Length Depth:
- 10.09 in
- Product Weight:
- 4.91 lb
- Product Width:
- 4 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, sweep opening
- Product Details:
- 90° elbow, sweep opening
- Product Material:
- Steel
B-LINE 64 L SWEEP – Frequently Asked Questions
1) What size wireway does the B-Line 64 L SWEEP elbow fit?
The Eaton B-Line 64 L SWEEP is sized for 6 x 4 inch lay-in wireway: product height is 6 in and width is 4 in, with an overall length/depth of 10.09 in. If your trough run is 4 x 4 or 8 x 8, this fitting will not line up with the flanges.
2) Is the 64 L SWEEP elbow rated for outdoor or wet locations?
No. It is a NEMA 1 degree of protection fitting, which is indoor, general purpose only, with no gasketing against rain or washdown. For an exterior run or a wet process area you need a NEMA 3R or 4 raintight wireway fitting instead.
3) What does "sweep opening" mean on this 90 degree wireway elbow?
The sweep refers to the radiused inside turn rather than a sharp square corner, so conductors bend through the 90 degree change of direction on a curve. That protects insulation and makes pulling or laying in a bundle of large conductors far easier than a mitered corner.
4) Can I lay conductors into this elbow without pulling them through?
Yes, it is a lay-in fitting. The cover comes off so you can drop conductors into the elbow and replace the cover, which is the point of a lay-in wireway system and why you do not need to fish the turn.
5) Will this elbow match the gray wireway trough already installed in my panel room?
The finish is ANSI 61 gray paint over steel, which is the standard gray used across Eaton B-Line wireway and most switchgear enclosures, so it blends with existing gray trough runs and panelboards.
6) How heavy is this wireway elbow, and does one person need support to hang it?
It weighs 4.91 lb, light enough for one electrician to hold in place while landing the flange bolts. The weight is steel construction, so support the adjoining trough sections normally rather than letting the elbow carry the run.
How fast can I get the B-LINE 64 L SWEEP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 64 L SWEEP come with a warranty?
Absolutely. The B-LINE 64 L SWEEP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 64 L SWEEP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 64 L SWEEP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.