You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, sweep opening, NEMA 1, Steel, ANSI 61 gray painted, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 4 in
- Product Length Depth:
- 7.09 in
- Product Weight:
- 3.543 lb
- Product Width:
- 4 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, sweep opening
- Product Details:
- 90° elbow, sweep opening
- Product Material:
- Steel
B-LINE 44 L SWEEP – Frequently Asked Questions
1) Will the B-Line 44 L SWEEP elbow fit 4x4 wireway?
Yes. The Eaton B-Line 44 L SWEEP is sized for 4 inch by 4 inch lay-in wireway, with a 4 inch height and 4 inch width at the openings. It will not mate to 6x6 or larger trough, so match the elbow to the body size you already have running.
2) Is this wireway elbow rated for outdoor or wet locations?
No. This is a NEMA 1 elbow, which is indoor, general purpose only. It offers no protection against rain, washdown, or dust, so for a rooftop, exterior, or wash-down area you need a NEMA 3R or NEMA 4 rated raintight wireway fitting instead.
3) What is the difference between a sweep opening elbow and a standard 90 degree wireway elbow?
A sweep opening gives a gradual radius through the turn rather than a sharp corner, so conductors lay in and bend around the change of direction with less strain. The 44 L SWEEP measures 7.09 inches along its length/depth, which is the extra reach the sweep radius takes up compared with a tight-corner elbow. Plan that dimension into your layout before you cut the straight sections.
4) Does this elbow let you lay wire in rather than pull it through?
It does. The 44 L SWEEP is a lay-in fitting, so the cover comes off and conductors drop straight into the channel around the turn. That is the whole reason to use wireway instead of conduit on a panel feed or control room run, and it saves pulling cable through a 90.
5) What material and finish is this wireway elbow, and will it match my existing trough?
Steel with an ANSI 61 gray painted finish. ANSI 61 gray is the standard color on most commercial electrical enclosures and wireway, so it will visually match B-Line lay-in wireway and typical gray panel gear already in the room.
6) How heavy is the 44 L SWEEP elbow for overhead support planning?
About 3.543 lb for the steel elbow itself. Light enough for one person to hold while bolting flanges, but on an overhead run remember you are also carrying the weight of the conductors laid in through the turn, so keep hangers close to the fitting.
How fast can I get the B-LINE 44 L SWEEP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44 L SWEEP come with a warranty?
Absolutely. The B-LINE 44 L SWEEP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44 L SWEEP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44 L SWEEP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.