You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, sweep opening, NEMA 1, Steel, ANSI 61 gray painted, 6" X 6"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 6 in
- Product Length Depth:
- 10.09 in
- Product Weight:
- 5.779 lb
- Product Width:
- 6 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, sweep opening
- Product Details:
- 90° elbow, sweep opening
- Product Material:
- Steel
B-LINE 66 L SWEEP – Frequently Asked Questions
1) Will the B-Line 66 L SWEEP elbow fit 6x6 wireway?
Yes. The Eaton B-Line 66 L SWEEP is built for 6 inch by 6 inch lay-in wireway, with a 6 in height and 6 in width on the openings. It will not mate to 4x4 or 8x8 trough; those sizes need the matching elbow for that cross section.
2) Is this a right-angle 90 degree wireway elbow or a sweeping bend?
It is a 90 degree elbow with a sweep opening, so conductors turn on a curve rather than a sharp corner. That matters when you are pulling large or stiff feeders through a gutter run and need to respect bend radius on the cable.
3) Can I use this wireway elbow outdoors or in a washdown area?
No. The 66 L SWEEP elbow is a NEMA 1 enclosure rating, which is indoor use only and offers no protection against falling water, dust or corrosive washdown. For wet or outdoor gutter runs you need a NEMA 3R or 4 rated fitting instead.
4) What is the finish on this Eaton B-Line wireway elbow, and will it match my existing gutter?
Painted steel in ANSI 61 gray, which is the standard gray Eaton B-Line uses across its lay-in wireway line, so it matches straight sections and other fittings in the same series. If your existing trough is a different manufacturer's gray, expect a close but not guaranteed match.
5) How much room do I need to allow for this 6x6 sweep elbow in the run?
Allow 10.09 inches of depth for the fitting. Lay that out before you cut your straight sections, because the sweep body takes more length than a square 90 would at the same 6 by 6 opening.
6) Do I have to pull wire through this elbow or can I lay it in?
Lay-in. The cover comes off so conductors drop into the sweep instead of being fished around the corner, which is the reason most contractors spec lay-in wireway for feeder work.
7) How heavy is a 6x6 sweep elbow for overhead support planning?
The fitting weighs 5.779 lb empty in painted steel. Add conductor weight when you size trapeze or strut supports on either side of the turn.
8) What is the Eaton part number to order this 6x6 sweep elbow?
Order it as B-Line 66 L SWEEP, a 90 degree lay-in sweep elbow, NEMA 1, steel, ANSI 61 gray, 6 inch by 6 inch. That number is what distinguishes it from the square-corner elbows in the same size.
How fast can I get the B-LINE 66 L SWEEP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 66 L SWEEP come with a warranty?
Absolutely. The B-LINE 66 L SWEEP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 66 L SWEEP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 66 L SWEEP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.