You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, 6" X 6" side opening, NEMA 1, Steel, ANSI 61 gray painted
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 6 in
- Product Length Depth:
- 6 in
- Product Weight:
- 2.513 lb
- Product Width:
- 6 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, side opening
- Product Details:
- 90° elbow, side opening
- Product Material:
- Steel
B-LINE 6645 HSLSIDE – Frequently Asked Questions
1) Will the B-Line 6645 HSLSIDE elbow fit 6 x 6 wireway?
Yes. The 6645 HSLSIDE is built for 6 inch by 6 inch lay-in wireway, with a 6 x 6 side opening on each leg so it mates to standard 6x6 trough. It will not adapt between sizes, so if one run is 4x4 or 8x8 you need the elbow that matches that cross section or a reducer.
2) Is this wireway elbow rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure rating, which is indoor, general purpose, dust and falling-dirt protection only. For wet or washdown areas you need a NEMA 3R or 4 rated wireway fitting instead.
3) What is the difference between a side opening 90 degree wireway elbow and a flat or top opening one?
A side opening 90 changes direction in the horizontal plane, turning a run left or right along a wall. A flat or top opening elbow turns the run up or down. Getting the orientation wrong means the conduit openings point the wrong way once it is bolted in place, so pick the side opening 6645 HSLSIDE when the corner is a wall-to-wall turn.
4) Will this elbow match the gray wireway already installed in our plant?
It is finished in ANSI 61 gray paint over steel, the standard gray used on most B-Line wireway and industrial enclosures, so it blends with existing ANSI 61 gray runs. If your existing trough is white, galvanized, or stainless, this will not match.
5) Does a lay-in wireway elbow let me drop conductors in without pulling them through?
That is the point of it. The lay-in design has a removable cover so conductors are laid into the trough at the corner rather than pulled around a 90, which keeps bend radius and pulling tension under control on larger feeders.
6) How much does the 6645 HSLSIDE elbow weigh for overhead support planning?
About 2.513 lb for the steel fitting itself. Light enough that the corner does not normally need its own dedicated hanger, though support spacing for the adjoining wireway runs still governs.
7) What is the exact manufacturer part number for this Eaton B-Line wireway elbow?
The MPN is 6645 HSLSIDE, an Eaton B-Line series 6 x 6 lay-in 90 degree side opening elbow in ANSI 61 gray steel.
How fast can I get the B-LINE 6645 HSLSIDE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6645 HSLSIDE come with a warranty?
Absolutely. The B-LINE 6645 HSLSIDE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6645 HSLSIDE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6645 HSLSIDE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.