You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, side opening, NEMA 1, Steel, ANSI 61 gray painted, 6" X 6"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 6 in
- Product Length Depth:
- 6 in
- Product Weight:
- 5.901 lb
- Product Width:
- 10.753 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, side opening
- Product Details:
- 90° elbow, side opening
- Product Material:
- Steel
B-LINE 66 HSLSIDE – Frequently Asked Questions
1) Will the B-Line 66 HSLSIDE elbow fit 6 x 6 wireway?
Yes. The Eaton B-Line 66 HSLSIDE is built for 6 inch by 6 inch lay-in wireway, with a 6 in height and 6 in length/depth matching the trough cross section. It turns the run 90 degrees with a side opening, so the fitting mates flange to flange with 6 x 6 straight sections of the same series.
2) Is this wireway elbow rated for outdoor or wet locations?
No. The 66 HSLSIDE carries a NEMA Type 1 degree of protection, which is indoor, general purpose, and offers no protection against falling water or washdown. For wet or outdoor runs you need a NEMA 3R rated wireway and fittings instead.
3) What is the difference between a side-opening 90 degree wireway elbow and a flat or top elbow?
A side opening elbow turns the wireway run horizontally, left or right, in the same plane as the trough side. A flat or top style turns the run up or down instead. The 66 HSLSIDE is the side opening version, so specify it when the raceway has to change direction along a wall rather than rise or drop.
4) What part number should I order for a 6x6 NEMA 1 side-opening 90 degree wireway elbow from B-Line?
Order Eaton B-Line 66 HSLSIDE. One model covers this configuration: 6 x 6, NEMA 1, steel, ANSI 61 gray, lay-in, 90 degree side opening. There are no finish or size options to pick on it.
5) What color and material is this B-Line wireway elbow, and will it match existing troughs?
Steel with an ANSI 61 gray painted finish, the standard gray used across Eaton B-Line wireway, so it matches straight sections and other fittings in the same series on an existing run.
6) How much does the 66 HSLSIDE elbow weigh and how far does it project?
It weighs 5.901 lb and measures 10.753 in across its widest dimension, with 6 in height and 6 in depth. Light enough for one person to hold up while bolting, but budget the 10.753 in overall for clearance where the turn lands near a corner or obstruction.
How fast can I get the B-LINE 66 HSLSIDE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 66 HSLSIDE come with a warranty?
Absolutely. The B-LINE 66 HSLSIDE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 66 HSLSIDE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 66 HSLSIDE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.