You may also like
Eaton B-Line series wireway end flange, Wireway end flange, NEMA 1, Steel, ANSI 61 gray painted finish, 12" X 12"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 12 in
- Product Length Depth:
- 12 in
- Product Weight:
- 1.364 lb
- Product Width:
- 13.5 in
- Department:
- Electrical
- Product Type:
- Wireway end flange
- Product Details:
- Wireway end flange
- Product Material:
- Steel
B-LINE 1212 GF – Frequently Asked Questions
1) What size wireway does the B-Line 1212 GF end flange fit?
The Eaton B-Line 1212 GF end flange is sized for 12 x 12 inch wireway. Height and depth are both listed at 12 inches, with an overall width of 13.5 inches, the extra material being the flange face that laps outside the duct. If your run is 4 x 4, 6 x 6, or 8 x 8 trough, this is the wrong part number and you need the flange matching that cross section.
2) Is the 1212 GF wireway flange rated for outdoor or wet locations?
No. The B-Line 1212 GF end flange is a NEMA 1 part, which is general purpose indoor protection only, with no gasketing or rain-tight rating. For an outdoor run, rooftop feeder, or a washdown area, use NEMA 3R or NEMA 4 gasketed wireway and the matching gasketed flange instead.
3) What is a wireway end flange actually used for on an electrical job?
It is the transition piece that closes off the end of a wireway run and bolts it to an enclosure, panelboard, or gutter, so conductors pass from the trough into the equipment through a finished, supported opening rather than an open duct end. The 1212 GF handles that connection on 12 x 12 inch wireway. It is not a blank end plate; if you just need to cap a dead end, that is a closure plate, not a flange.
4) Will the gray finish on this end flange match my existing B-Line wireway run?
The 1212 GF is finished in ANSI 61 gray paint, which is the standard gray used across Eaton B-Line NEMA 1 screw-cover wireway, so it blends with an existing run in the same finish. Body material is steel, so touch up any field-cut or scratched area to keep it from rusting in a damp mechanical room.
5) How heavy is the 12 x 12 wireway end flange for handling and support planning?
It weighs 1.364 lb, so it adds essentially nothing to the load on your hangers or trapeze. The weight to plan around is the filled trough itself, not this fitting.
How fast can I get the B-LINE 1212 GF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1212 GF come with a warranty?
Absolutely. The B-LINE 1212 GF is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1212 GF?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1212 GF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.