Eaton B-Line series wireway miscellaneous fitting, Feed through, Wireway cutoff fitting, NEMA 4X, Stainless steel, Brushed finish, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Finish Color:
- Brushed finish
- Product Height:
- 4 in
- Product Length Depth:
- 12 in
- Product Weight:
- 4.863 lb
- Product Width:
- 4 in
- Special Features:
- NEMA 4X
- Wiring Method:
- Feed through
- Department:
- Electrical
- Product Type:
- Wireway cutoff fitting
- Product Details:
- Wireway cutoff fitting
- Product Material:
- Stainless steel
- Product Length:
- 12 in
B-LINE 44-4XSFCF – Frequently Asked Questions
1) Will the B-Line 44-4XSFCF cutoff fitting fit 4 inch by 4 inch wireway?
Yes. The Eaton B-Line 44-4XSFCF is sized for 4 x 4 inch wireway, with a stated height of 4 inches and width of 4 inches, and an overall length of 12 inches. It will not mate with 6 x 6 or larger trough without a reducer, since the cross section has to match the run it terminates into.
2) Is this B-Line wireway fitting rated for washdown or outdoor use?
The 44-4XSFCF carries a NEMA 4X rating, so it is built for wet, outdoor and corrosive duty including hosedown and washdown areas. The body is stainless steel with a brushed finish, which is what makes the 4X corrosion rating possible in food processing, car wash and coastal installs. It is UL Listed.
3) What does a wireway cutoff fitting actually do in a run?
A cutoff fitting is the feed through piece you use to terminate or transition a wireway run, letting conductors pass through while closing out the trough end. The 44-4XSFCF is a feed through fitting, so conductors continue through it rather than stopping at a dead end. Use an end plate instead if you need to close the run off completely.
4) Can I mix this stainless 4X fitting with painted steel NEMA 1 or 3R wireway?
You can physically land it on a matching 4 x 4 trough, but doing so gives up the 4X protection at that joint. A NEMA 4X system only holds its rating if every fitting, cover and gasket in the run is 4X. On a washdown or corrosive job, keep the whole run stainless; on a dry indoor run, a painted steel NEMA 1 fitting is the cheaper match.
5) What is the exact part number to order this Eaton B-Line 4X cutoff fitting?
Order it as Eaton B-Line 44-4XSFCF. That designation breaks down as 4 x 4 inch wireway, 4X stainless, feed through cutoff fitting.
6) How much does the B-Line 44-4XSFCF weigh for overhead mounting?
It weighs 4.863 lb. At that weight a single 12 inch stainless section is a one-hand lift, but support spacing for the overall wireway run still governs, not the fitting weight.
How fast can I get the B-LINE 44-4XSFCF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44-4XSFCF come with a warranty?
Absolutely. The B-LINE 44-4XSFCF is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44-4XSFCF?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44-4XSFCF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.