You may also like
Eaton B-Line series wireway tee fitting, Lay-in, Wireway tee fitting, NEMA 1, Steel, ANSI 61 gray painted
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 6 in
- Product Length Depth:
- 14 in
- Product Weight:
- 5.728 lb
- Product Width:
- 6 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway tee fitting
- Product Details:
- Wireway tee fitting
- Product Material:
- Steel
B-LINE 64 T – Frequently Asked Questions
1) Will the B-Line 64 T tee fit 6x6 wireway?
Yes. The Eaton B-Line 64 T tee fitting is built for 6 inch by 6 inch lay-in wireway, with a 6 inch height and 6 inch width to match the trough cross section. Overall run length is 14 inches. If your wireway is 4x4, 8x8 or 12x12, this tee is the wrong size.
2) Is the 64 T wireway tee rated for outdoor or wet locations?
No. It is a NEMA Type 1 enclosure rating, which is indoor, general purpose, dry locations only. For outdoor, washdown or damp areas you need a NEMA 3R or 4 rated wireway tee instead. The 64 T is UL Listed.
3) What does a lay-in wireway tee do that a standard fitting doesn't?
Lay-in construction means the cover comes off and conductors drop straight into the trough rather than being pulled through. On a 6x6 tee like the 64 T that matters when you are branching a feeder run in three directions and don't want to fish wire around a corner. It is the fitting you use where one wireway run splits into two.
4) What material and finish is the B-Line 64 T tee, and will it match my existing wireway run?
Steel with an ANSI 61 gray painted finish, which is the standard gray used across Eaton B-Line wireway and most industrial control gear, so it blends with an existing ANSI 61 run. Note the painted steel is for indoor use; it is not a galvanized or stainless part.
5) What is the exact part number to order this Eaton B-Line wireway tee?
Order it as Eaton B-Line part number 64 T. The 64 designation reflects the 6 inch by 6 inch trough size and the T is the tee configuration.
6) How much does the 64 T wireway tee weigh for overhead support planning?
5.728 lb. Light enough that a single trapeze or wall bracket at the tee handles it, but the junction is still where three wireway runs meet, so support the adjoining sections at the fitting rather than hanging them off it.
7) Does the 64 T come with the hardware to connect it to the wireway sections?
The 64 T is sold as the tee fitting body itself. Connectors, ground straps, hangers and any closure plates are ordered separately, so build those into your take-off when you count fittings for the run.
How fast can I get the B-LINE 64 T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 64 T come with a warranty?
Absolutely. The B-LINE 64 T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 64 T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 64 T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.