You may also like
Eaton B-Line series wireway tee fitting, Lay-in, Wireway tee fitting, NEMA 1, Steel, ANSI 61 gray painted, 2.5" X 2.5"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 2.5 in
- Product Length Depth:
- 8.5 in
- Product Weight:
- 2.012 lb
- Product Width:
- 2.5 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway tee fitting
- Product Details:
- Wireway tee fitting
- Product Material:
- Steel
B-LINE 22 T – Frequently Asked Questions
1) Will the B-Line 22 T wireway tee fit 2.5 inch square lay-in wireway?
Yes. The Eaton B-Line 22 T tee is sized for 2-1/2 by 2-1/2 inch wireway, matching the standard 2.5 in x 2.5 in cross section. Overall length/depth of the fitting is 8.5 inches, so allow that much run length where the tee lands. It will not mate with 4x4 or 6x6 wireway, which take fittings of the matching size.
2) Is this B-Line tee rated for outdoor or wet locations?
No. The 22 T tee is a NEMA 1 enclosure type, which is indoor, general purpose protection against incidental contact and falling dirt only. For washdown, damp, or exterior runs you need a NEMA 3R or 4 rated wireway system instead.
3) Is the B-Line 22 T wireway tee UL Listed?
It is UL Listed, which is what most inspectors and specs want to see on a wireway system carrying feeders or control wiring in a commercial or institutional building.
4) What does lay-in construction mean on this wireway tee, and does it help on a retrofit?
Lay-in means the cover comes off so conductors drop straight into the trough rather than being pulled through. On a branch or pull point that saves a lot of time, and it lets you add or re-route circuits later without pulling the whole run. That is the main reason installers use a lay-in tee at a branch instead of making the turn with conduit bodies.
5) Do I use a wireway tee or just a conduit body to branch a 2.5 inch wireway run?
Use the tee when you are branching wireway to wireway. The 22 T keeps the 2-1/2 inch square cross section continuous through the branch and stays lay-in, so conductors are not forced through a small conduit body opening and you keep access for future changes. A conduit body is for transitioning off the wireway into pipe, not for carrying the trough around a corner.
6) What is this tee made of and what is the finish?
Steel, with an ANSI 61 gray painted finish. ANSI 61 gray is the standard gray used on most electrical gear, so the tee matches typical panelboards, enclosures and the rest of a gray wireway run in a plant or mechanical room.
How fast can I get the B-LINE 22 T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 22 T come with a warranty?
Absolutely. The B-LINE 22 T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 22 T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 22 T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.