Eaton B-Line series wireway telescoping fitting, Feed through, Wireway telescoping fitting, NEMA 4X, Stainless steel, Brushed finish, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Finish Color:
- Brushed finish
- Product Height:
- 3.82 in
- Product Length Depth:
- 15.5 in
- Product Weight:
- 6.899 lb
- Product Width:
- 3.82 in
- Special Features:
- NEMA 4X
- Wiring Method:
- Feed through
- Department:
- Electrical
- Product Type:
- Wireway telescoping fitting
- Product Details:
- Wireway telescoping fitting
- Product Material:
- Stainless steel
B-LINE 44-4XSFTF – Frequently Asked Questions
1) What size wireway does the B-Line 44-4XSFTF telescoping fitting work with?
It's built for 4 inch by 4 inch wireway. The fitting body measures 3.82 inches in height and 3.82 inches in width, which is the nominal 4x4 trough size, and it runs 15.5 inches in length so it can telescope to close a gap between two fixed runs.
2) Is the B-Line 44-4XSFTF wireway fitting rated for washdown or outdoor use?
It carries a NEMA 4X rating, so it's intended for wet, washdown, and corrosive environments where a painted steel fitting would fail. The body is stainless steel with a brushed finish, which is what backs up the 4X rating in food processing, marine, car wash, and exterior installs.
3) Will the 44-4XSFTF hold the NEMA 4X rating of my existing stainless wireway run?
Yes, provided the rest of the run is also 4X. The fitting is rated NEMA 4X in stainless steel, so it doesn't downgrade a 4X system. Mixing it into a painted carbon steel NEMA 1 or 3R trough is where you lose the rating, since the enclosure system is only as good as its weakest section.
4) What does a telescoping feed through fitting do on a wireway run?
A telescoping fitting closes the gap between two sections of wireway that are already fixed in place, so you don't have to break down the run or cut a piece to length. The 44-4XSFTF is a feed through type, meaning conductors pass straight through in line rather than turning a corner. If you need to change direction, you want an elbow or tee fitting instead.
5) What's the exact part number to order this Eaton B-Line stainless telescoping fitting?
Order Eaton B-Line model 44-4XSFTF. That's the 4x4 stainless steel, brushed finish, NEMA 4X feed through telescoping wireway fitting. The number breaks down as 4x4 size, 4X rating, stainless, feed through fitting.
6) How much does the B-Line 44-4XSFTF telescoping fitting weigh for overhead mounting?
6.899 lb. Light enough for a single person to set in an overhead run, but factor it into support spacing if you have several stainless fittings on the same trapeze.
How fast can I get the B-LINE 44-4XSFTF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44-4XSFTF come with a warranty?
Absolutely. The B-LINE 44-4XSFTF is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44-4XSFTF?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44-4XSFTF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.