You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Amperage Rating:
- 100A
- Circuit Breaker Frame Type:
- Complete breaker
- Circuit Breaker Type:
- ED
- Frame Size:
- F-frame
- Frequency Rating:
- 50/60 Hz
- Interrupt Rating:
- 200 kAIC at 240 Vac
- Number Of Poles:
- Two-pole
- Series:
- Series C
- Terminals:
- Load side
- Trip Type:
- Fixed thermal, fixed magnetic
- Voltage Rating:
- 240 Vac, 125 Vdc
- Department:
- Electrical
- Product Length:
- 3.38 IN
- Product Height:
- 6 IN
- Product Weight:
- 3 LB
- Product Width:
- 2.75 IN
B-LINE EDC2100 – Frequently Asked Questions
1) Will the EDC2100 breaker work on a 240V single-phase panel at 100 amps?
Yes. The EDC2100 is a two-pole, 100A molded case breaker rated 240 Vac (and 125 Vdc), 50/60 Hz, so it drops onto a standard 240V single-phase feed at 100 amps. It is not rated above 240 Vac, so it is not a candidate for 480V panels.
2) Is the EDC2100 a complete breaker or just the frame, and do I need to order a trip unit?
It ships as a complete breaker with a fixed thermal, fixed magnetic trip. No separate trip unit or rating plug to specify, and no field trip adjustment. If your spec calls for adjustable or electronic trip, this is the wrong ED-type breaker for it.
3) Does the EDC2100 have a high enough interrupting rating for a service with high available fault current?
It is rated 200 kAIC at 240 Vac, which is the current-limiting end of the ED line and covers service points with very high available fault current at 240V. That rating is tied to 240 Vac; do not apply it at other system voltages.
4) Will an EDC2100 fit in an Eaton F-frame panel or enclosure cutout?
The EDC2100 is an F-frame Series C breaker, so it uses the F-frame mounting and cutout pattern used across Eaton Series C ED breakers. Body dimensions are 6 in height, 3.38 in length and 2.75 in width, weighing 3 lb, which is what you need to confirm clear space in a tight enclosure or gutter.
5) What terminals come on the EDC2100 and what do I need for the line side?
Terminals are supplied on the load side. Line side connection depends on how you mount it, so plan for a plug-on or bus connection in the panel or the appropriate line-side terminal kit for a standalone enclosure installation.
6) Can I use the EDC2100 on a 125 VDC circuit?
Yes, it carries a 125 Vdc rating alongside 240 Vac, so it can be applied on 125 VDC control or battery circuits at up to 100 amps with the same fixed thermal-magnetic trip.
How fast can I get the B-LINE EDC2100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE EDC2100 come with a warranty?
Absolutely. The B-LINE EDC2100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE EDC2100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE EDC2100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.