Eaton Series C F-Frame Molded ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$688.00
Eaton Series C F-Frame Molded Case Circuit Breaker, Two-Pole

Eaton Series C F-Frame Molded Case Circuit Breaker, Two-Pole

(No reviews yet) Write a Review

Model: ED2200

In Stock (leaves warehouse same day if ordered before 3pm ET)

$688.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton Series C F-Frame Molded Case Circuit Breaker, Two-Pole

The Eaton Series C F-Frame molded case circuit breaker is a two-pole, complete breaker built for reliable overcurrent protection in commercial and industrial electrical systems. Rated 240 Vac / 125 Vdc with a 65 kAIC interrupt rating at 240 Vac, this ED-type breaker uses fixed thermal and fixed magnetic tripping for dependable fault protection, and is available across the F-Frame platform's 15-225A range to match a wide variety of panelboard and load center applications. UL Listed for code-compliant installations, it is engineered for dependable performance in demanding electrical environments.

Key Features

  • Frame Type: F-Frame complete molded case circuit breaker construction for durable, code-compliant overcurrent protection.
  • Configuration: Two-pole design for balanced circuit protection in single- and multi-phase distribution equipment.
  • Voltage Rating: 240 Vac, 125 Vdc rating suited for standard commercial and industrial distribution voltages.
  • Interrupt Rating: 65 kAIC at 240 Vac for high fault-current withstand capability.
  • Trip Type: Fixed thermal, fixed magnetic tripping delivers consistent, factory-set overcurrent and short-circuit protection.
  • Circuit Breaker Type: ED-type breaker on the Series C platform, offered in ratings across the F-Frame 15-225A range.
  • Terminals: Line and load terminals for straightforward panel wiring.
  • Frequency Rating: Rated for 50 to 60 Hz distribution systems.

Certifications & Compliance

  • UL Listed

Technical Specifications

  • Frame: F
  • Circuit breaker type: ED
  • Department: Electrical

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Panelboard and Load Center Wiring
  • Overcurrent and Short-Circuit Protection
  • Motor and Feeder Circuit Protection
  • Electrical Panel Renovation and New Construction

Why Eaton?

Eaton's Series C F-Frame molded case circuit breakers combine UL Listed certification with a 65 kAIC interrupt rating and fixed thermal-magnetic tripping for consistent, code-compliant overcurrent protection. Backed by Eaton's manufacturing standards, this ED-type breaker is built for the reliability that commercial and industrial electrical professionals depend on.

Manufacturer Resources

Product Specs

Product Width:
2.75 in
Voltage Rating:
240 Vac
Amperage Rating:
200A
Terminals:
Line and load
Product Length/Depth:
3.38 in
Circuit breaker frame type:
Complete breaker
Frame:
F
Product Height:
2.75 in
Frequency rating:
50 to 60 Hz
Number of poles:
Two-pole
Series:
Series C
Interrupt rating:
65 kAIC at 240 Vac
Circuit breaker type:
ED
Trip Type:
Fixed thermal, fixed magnetic
Certifications:
UL Listed
Product Type:
Circuit Breaker
Department:
Electrical
Configuration:
Two-Pole
Listing:
UL Listed
Product Group:
Circuit Protection
Product Subgroup:
Circuit Breakers

Eaton ED2200 – Frequently Asked Questions

1) What amperage is the Eaton ED2200 F-Frame breaker rated for?
The ED2200 is a 200A two-pole breaker on Eaton's Series C F-Frame platform. The F-Frame line runs 15A through 225A, so if 200A is above or below what your feeder calls for, the same ED-type breaker is available at other ratings in that range. Trip settings are fixed thermal and fixed magnetic, factory set, so the 200A rating is not adjustable in the field.
2) Will a 65 kAIC breaker satisfy my available fault current at the panel?
The ED2200 carries a 65 kAIC interrupting rating at 240 Vac, which covers service points where the utility available fault current runs high enough that a standard 10 kAIC or 22 kAIC device will not hold. Compare it against the available fault current on your coordination study or the utility letter at that point in the system: as long as that number is at or below 65 kA at 240 Vac, this breaker is rated for it.
3) Is this a complete breaker or just the frame, and do I need to order a trip unit separately?
It ships as a complete breaker. The F-Frame ED2200 has fixed thermal and fixed magnetic trip built in at the 200A rating, so there is no separate trip unit, rating plug, or electronic trip module to specify. Order the breaker and it is ready to land in the panel.
4) How much space does the Eaton ED2200 breaker take up in the enclosure?
The breaker body measures 2.75 x 3.38 x 2.75 inches (height, length/depth, width). Two-pole F-Frame devices of this size go into the standard F-Frame opening, so confirm your panelboard interior or enclosure cutout is prepped for an F-Frame two-pole before you order. Wiring lands on line and load terminals on the breaker itself.
5) Is the Eaton ED2200 UL Listed for an inspected commercial installation?
Yes, the ED2200 is UL Listed. For a facility MRO or institutional buyer standardizing on one breaker family, the Series C F-Frame ED type gives you a UL Listed molded case device at 65 kAIC across the 15 to 225 amp range, which keeps spares consistent across panelboards in the same building.
6) Can I use this breaker for motor branch circuit protection?
It is a thermal-magnetic molded case breaker with fixed settings, suited to feeder and motor circuit protection in commercial and industrial distribution. Because the magnetic pickup is fixed rather than adjustable, you cannot tune the instantaneous trip around a high inrush motor. If your motor starting current is nuisance-tripping a fixed magnetic device, you need an adjustable or motor-circuit-protector style breaker instead.
7) Does this two-pole breaker work on a 60 Hz commercial panel, or is it also good for 50 Hz?
Both. The frequency rating is 50 to 60 Hz, so the same ED2200 works on standard North American 60 Hz distribution and on 50 Hz equipment, which matters if you are protecting imported machinery or working on a facility that runs 50 Hz service.
How fast can I get the Eaton ED2200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton ED2200 come with a warranty?
Absolutely. The Eaton ED2200 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton ED2200?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton ED2200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!