You may also like
Elastimold 655CA Series 15/25KV 600A Cable Adapter
Model: ELSM-P483143
Elastimold 655CA Series 15/25KV 600A Cable AdapterThe Elastimold 655CA Series is a line of 600A cable adapters engineered for medium-voltage underground distribution systems, rated 15/25KV. Available...
Elastimold
Starting at
$94.11
Elastimold K650BIP 600 Series 15/25kV 600A Deadbreak Insulated Plug with Cap
The Elastimold K650BIP is a 600 Series deadbreak insulated plug rated 15/25kV at 600A, engineered for use in underground distribution systems where a dead-end termination or de-energized bushing cover is required. Supplied complete with a protective cap, this insulated plug is built to the Elastimold 600 Series platform, a widely specified family of deadbreak elbow and accessory components used by utilities and industrial electrical crews. The K650BIP allows a 600 Series bushing or interface point to be safely capped off and electrically isolated, maintaining system integrity on unused or spare positions within switchgear, transformers, and junction enclosures.
Key Features
- Voltage Rating: 15/25kV class construction suited for medium-voltage underground distribution applications.
- Amperage Rating: 600A rated capacity, consistent with the Elastimold 600 Series deadbreak component family.
- 600 Series Platform: Designed to mate with standard 600 Series deadbreak bushings and interfaces for broad system compatibility.
- Insulated Plug Configuration: Functions as a deadbreak insulating plug to cap and electrically isolate an unused bushing or port.
- Includes Cap: Supplied with a matching protective cap for complete termination of the connection point.
- Deadbreak Design: Intended for de-energized connection and disconnection in accordance with standard 600 Series deadbreak practice.
Technical Specifications
- Voltage Rating: 15/25KV
- Amperage Rating: 600A
- Series: 600 Series
- Product Type: Insulated Plug
- Configuration: Deadbreak Plug with Cap
Typical Applications
- Underground Distribution Switchgear
- Padmount Transformer Terminations
- Spare or Unused 600 Series Bushing Capping
- Medium-Voltage Junction and Pedestal Enclosures
- Utility and Industrial Electrical Distribution Systems
Why Elastimold?
Elastimold is a long-established name in deadbreak and separable connector technology for medium-voltage underground distribution. The K650BIP continues that standard with a 600 Series insulated plug and cap rated for 15/25kV and 600A service, built to integrate directly with existing 600 Series equipment for dependable, code-compliant isolation of unused connection points.
Manufacturer Resources
Product Specs
- list_batch:
- ELSM-20261001
- Product Type:
- Insulated Plug
- Voltage Rating:
- 15/25KV
- Amperage Rating:
- 600A
- Series:
- 600 Series
- Configuration:
- Deadbreak Plug with Cap
- Department:
- Electrical
- Product Group:
- Power Distribution
- Product Subgroup:
- Electrical
- Product Material:
- EPDM Rubber
- Country Of Origin:
- United States
- Application:
- 15/25kv, 600 Amps
Elastimold K650BIP – Frequently Asked Questions
1) What does the Elastimold K650BIP insulated plug actually do on a padmount transformer or switchgear?
The K650BIP is a 600 Series deadbreak insulated plug that caps off and electrically isolates an unused or spare 600 Series bushing. Instead of leaving a spare position open on underground distribution switchgear, a padmount transformer, or a junction enclosure, the plug seats on the bushing interface and insulates it. It ships with a matching protective cap, so the connection point is completely terminated. It is not a cable termination; nothing lands on it.
2) Will the K650BIP fit a 15kV 600 amp deadbreak bushing, or do I need a different plug for 25kV?
One part covers both. The K650BIP is built to 15/25kV class and rated 600A, so the same plug works on 15kV and 25kV class 600 Series deadbreak interfaces. There is no separate 15kV-only version to specify.
3) Can the K650BIP be installed or removed on an energized bushing?
No. It is a deadbreak component, meaning the connection point has to be de-energized before the plug is installed or pulled. Deadbreak 600 Series practice requires isolating and grounding the position first. If your work plan calls for switching under load, you need a loadbreak-rated product, not a deadbreak plug.
4) Does the K650BIP mate with 200 amp loadbreak elbows or only 600 amp deadbreak equipment?
Only 600 Series deadbreak. The plug is built on the Elastimold 600 Series platform and mates with standard 600 Series deadbreak bushings and interfaces rated 600A. A 200A loadbreak bushing uses an entirely different interface geometry, so this plug will not seat on it. For capping a 200A loadbreak bushing you need an insulated protective cap made for that interface.
5) What is the Elastimold K650BIP plug body made of, and how does that hold up in a buried vault or pedestal?
The body is molded EPDM rubber, the same peroxide-cured elastomer family Elastimold uses across its separable connector line. EPDM handles the wet, submerged conditions typical of underground vaults, pedestals, and below-grade junction enclosures and stays flexible for seating on the bushing interface. The plug is made in the United States.
6) Is a cap included with the K650BIP or do I have to order it separately?
The cap is included. The K650BIP is supplied as a deadbreak plug with a matching protective cap, so you get a complete termination for the connection point in one part number. Order quantity per spare position is one.
7) What is the exact part number to order for an Elastimold 600 Series 600A insulated plug with cap?
Order Elastimold K650BIP. That single model covers the 600 Series 15/25kV 600A deadbreak insulated plug supplied with cap, and there are no finish, size, or configuration options to pick on it.
8) We are standardizing spares across our underground distribution system. Is one K650BIP enough for different 600 Series equipment makes?
For 600 Series deadbreak interfaces, yes, one stocked item covers them. Because the plug is built to the standard 600 Series deadbreak interface at 15/25kV and 600A, the same K650BIP caps spare positions on switchgear, padmount transformer bushings, and junction or pedestal enclosures regardless of which of those a crew is working in. That makes it a practical single-line-item spare for a utility or industrial MRO stock.
How fast can I get the Elastimold K650BIP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Elastimold K650BIP come with a warranty?
Absolutely. The Elastimold K650BIP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Elastimold K650BIP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Elastimold K650BIP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.