Box Covers & Accessories

Eaton Terminal Kit Rubber Boot Kit Black 5x5x1 InchProfessional Terminal Protection & Insulation SolutionThe Eaton Terminal Kit Rubber Boot Kit delivers reliable terminal protection and electrical...

ABB Box Back Rear Panel Enclosure AccessoryThe ABB Box Back is a rear-panel enclosure accessory engineered to serve as the back element for electrical box and enclosure assemblies used in...

Hubbell Wiring S1TFCAL ScrubShield® SystemOne Tile Flange Cover, 4-Inch Cast AluminumThe Hubbell Wiring S1TFCAL is a 4-Inch Tile Flange Universal Cover engineered for the ScrubShield® SystemOne floor...

Minerallac Pre-Galvanized Steel Outlet Retainer for Oversized OpeningsProfessional Solution for Standard Outlet Installation in Oversized OpeningsThe Minerallac Pre-Galvanized Steel Outlet Retainer...

Mulberry 40418 Ceiling Outlet Blank-Up Canopy Kit, 5-Inch White Semi-GlossThe Mulberry 40418 Ceiling Outlet Blank-Up Canopy Kit is a 5-Inch diameter canopy designed to cover and conceal an unused or...

Mulberry 40430 Steel Blank Ceiling Cover Plate, Smooth Enamel Finish, 4-Inch x 4-InchThe Mulberry 40430 Steel Blank Ceiling Cover Plate is a 4-Inch x 4-Inch blank cover designed to close off an...

Mulberry 40431 Flat Canopy Ceiling Plate, Smooth Enamel Steel, 5-InchThe Mulberry 40431 Flat Canopy Ceiling Plate is a 5-Inch smooth enamel steel cover engineered to conceal electrical boxes, wiring...

Mulberry 40460 Emergency Switch Guard, Stainless Steel PlateThe Mulberry 40460 Emergency Switch Guard is a stainless steel plate designed to cover and protect emergency switches from accidental...

Pass & Seymour LVDIV1 Low-Voltage Box Divider Plate, Slater SeriesThe Pass & Seymour LVDIV1 is a low-voltage box divider plate from the Slater series, engineered to safely separate low-voltage wiring...

Rittal 180° Hinge for AE Enclosures, Die-Cast ZincThe Rittal 180° Hinge (2449000) extends the door opening angle on compatible enclosures to a full 180°, giving technicians and installers wider,...

Rittal 3140110 Roof-Mounted Fan, 115V IP54 NEMA 12The Rittal 3140110 Roof-Mounted Fan is a new-generation roof vent engineered as one system for all sizes, using a single mounting cut-out across...

Rittal 3237200-3 ABS Outlet Filter for TopTherm Fan UnitsThe Rittal 3237200-3 Outlet Filter is molded from durable ABS and engineered to support convection ventilation for enclosures equipped with...

Rittal 3238110-4 TopTherm Filter Fan Unit, 115VThe Rittal 3238110-4 TopTherm Filter Fan Unit is a complete, tool-free fan assembly built for surface mounting on enclosures, with the TopTherm filter...

Rittal 3294100 Open-Celled Polyurethane Foam Filter MatThe Rittal 3294100 Open-Celled Polyurethane Foam Filter Mat is engineered for use on enclosure ventilation openings, fan units, and filter fan...

Rittal 4118000 Genuine OEM Steel Print PocketThe Rittal 4118000 Steel Print Pocket is a genuine OEM component sourced directly from Rittal, a globally recognized manufacturer of industrial...

Rittal 4165000 Captive Nut for TS/VX SE Enclosure SystemsThe Rittal 4165000 Captive Nut is engineered for enclosures and rails featuring a rectangular 12.5 x 10.5 mm system punching, providing a...

Rittal Adjacent Door Latch for Single-Door EnclosuresRittal's Adjacent Door Latch is engineered for installation in an adjacent enclosure, giving single-door enclosure configurations a dependable...

Rittal Bayed Suite Interlock Bar, Interconnecting Locking RodThe Rittal Interlock Bar, also supplied as an Interconnecting Rod, extends the locking mechanism of a main enclosure to each adjacent...

Rittal 86010 TS Base/Plinth Trim Panel, Side, 100 mmThe Rittal 86010 TS Base/Plinth Trim Panel is a side trim component engineered for Rittal TS enclosure and plinth base systems, standing 100 mm...

Rittal 8601000-6 TS Base/Plinth Trim Panel, Front and Rear, 100 mmThe Rittal 8601000-6 TS Base/Plinth Trim Panel is a front-and-rear base/plinth trim assembly for Rittal TS enclosure systems,...

Rittal 86020 TS Base/Plinth Side Panel, 200 mmThe Rittal 86020 is a genuine TS Base/Plinth Side component engineered to work with Rittal TS enclosure systems, forming part of the base/plinth frame...

Rittal 86120 TS System Chassis, 17 x 73 mm Carbon SteelThe Rittal 86120 TS System Chassis is a 17 x 73 mm profile carbon steel chassis engineered for universal skeleton structures and partial...

Rittal 864000 VX Base/Plinth Trim Panel, 100 mmThe Rittal 864000 VX Base/Plinth Trim Panel is a base/plinth component engineered to finish the bottom of Rittal VX enclosure systems, delivering a...

Rittal 864002 VX Base/Plinth Component, 200 mmThe Rittal 864002 VX Base/Plinth Component is a genuine Rittal enclosure accessory built for the Rittal VX enclosure platform, supplied with a 200 mm...