Emtek 12A5 Multi Point Lock Tr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$374.00
$299.20
Emtek Emtek 12A5 Multi Point Lock Trim (Door Config #2) - Brass Plates, Modern Style (1.5" x 11"), Dummy Pair EMTEK-12A5

Emtek 12A5 Multi Point Lock Trim (Door Config 2) - Brass Plates, Modern Style (1.5" x 11"), Dummy Pair

(1 review) Write a Review

Model: 12A5-US19
From the Brass Collection
$374.00
$299.20
Selected Finish is
Selected Lever Style is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$374.00
$299.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 12A5 Multi Point Lock Trim (Door Config #2) - Brass Plates, Modern Style (1.5" x 11"), Dummy Pair

  • Can be ordered with any Brass Levers
  • Swinging Patio Door Hardware. Set includes Plates, Handles
  • Multi Point Mortise Lock Box not included. Trims Only

Features:

  • Your choice of lever included
  • Crafted from high quality forged brass for lasting durability
  • Premium finishes maintain their appearance over time
  • Includes all necessary mounting hardware
  • Covered by Emtek's limited lifetime warranty

Specifications:

  • Door Thickness: 1-3/4", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8"
  • Cylinder Hub Location: Above Handle American Cylinder
  • Center to Center: 3-5/8"
  • Mounting Holes Center to Center: 7-9/16"
  • Handle to Mount: 2-9/16"
  • Manufacturer Door Configuration: 2
  • Trim Height: 11"
  • Trim Width: 1-1/2"
Manufacturer Resources

Product Specs

Subcategory:
Multi Point Lock Trim
Product Group:
Mechanical Locks
Commercial/Residential:
Residential
Product Type:
Multi Point Lock Trim
Product Subgroup:
Multi Point Lock Trim
Collection:
Brass
Cylinder Position:
Above Handle
Door Configuration:
#2
Electronic:
No
Keyed:
No
Lock Type:
Multi Point Trim
Ref. Door Manufacturer(s):
BiltBest, G-U, Hurd (Energy Saver), Andersen
Series:
Modern
Theme:
Contemporary
MAP Policy:
Yes
Product Model:
12A5
(CTC) Center-to-Center:
3-5/8"
Product Function:
Dummy
Product Size:
1-1/2" x 11"
Cylinder Classification:
American
Product Style:
Modern
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 12A5-US19 – Frequently Asked Questions

1) What does Emtek Door Configuration #2 mean, and how do I know my patio door takes it?
Door Configuration #2 describes the hole pattern in the door: the cylinder hub sits above the handle and takes an American cylinder, with 3-5/8 inch center to center from cylinder to spindle, mounting holes 7-9/16 inch center to center, and 2-9/16 inch from the handle to the mounting hole. Measure those three dimensions on the existing prep. If they don't match, a different Emtek configuration number is the one you need, not this trim.
2) Which patio door brands does the Emtek 12A5 trim reference for fit?
Emtek references Door Configuration #2 against BiltBest, G-U, Hurd (Energy Saver) and Andersen swinging patio doors. That is the starting point, not the finish: confirm the prep against 3-5/8 inch cylinder-to-spindle center to center and 7-9/16 inch mounting hole spacing, since a single door brand can ship more than one gearbox pattern.
3) What does a dummy pair multi point trim actually do, and when would I use it instead of an active set?
A dummy pair is non-operating trim: handles and plates on both faces with no latching function and no key cylinder, so it doesn't retract anything. It's what goes on the inactive leaf of a French patio pair, or on a door held shut by flush bolts or a separate lock. If the leaf needs to lock or latch, you want a keyed or non-keyed active multi point trim instead, plus the gearbox.
4) Do I have to specify handing on the Emtek 12A5 dummy trim?
Yes, right hand or left hand is a required choice. Even though a dummy doesn't latch, the plate is cut for a cylinder hub above the handle, so a mirrored plate lands the cylinder hole on the wrong side. Stand outside the door: if the hinges are on your right it's right hand.
5) What size are the Emtek 12A5 plates, and will they cover my old trim's marks?
The plates measure 1-1/2 by 11 inches in the modern flat-plate style. That's a narrow, tall escutcheon, so it hides a vertical run of prep but very little side to side. If the previous handle set left a wider footprint or a separate cylinder ring outside that 1-1/2 inch band, it will show.
6) Can I match the lever on my Emtek patio door trim to the levers on my interior doors?
Yes, and that's the point of the 12A5. The lever is a required selection from over fifty Emtek brass levers, from the modern L-Square, T-Bar and R-Bar bars in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through Athena, Helios, Hermes, Luzern, Poseidon and Stuttgart, to traditional patterns like Ribbon and Reed, Rope, Rustic, Santa Fe, Wembley and Arts and Crafts. Pick the same lever and the same finish you used on the interior openings and the patio door reads as part of the set.
7) What finishes does the Emtek 12A5 brass multi point trim come in?
Seven: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). Unlacquered brass is the one to think twice about on an exterior patio door, since it has no clear coat and will patina with handling and weather. The others hold their look.
8) Is the Emtek 12A5 trim brass all the way through or plated?
Solid forged brass, both the plates and the handles, with the finish applied over it. That matters on an exterior patio door where a plated zinc part gives up first at the edges and around the fixings.
9) Is the Emtek 12A5 multi point trim suitable for a commercial entrance?
It's built for residential swinging patio doors. For a storefront, apartment common entry or any opening that needs a graded commercial lock, this isn't the part; look at a Grade 1 mortise or exit device instead.
10) Does the Emtek 12A5 take a key cylinder or any electronics?
Neither. It's a mechanical dummy with no key cylinder and no electrified option. The plate carries a hub position above the handle sized for an American cylinder so it matches the active leaf visually, but nothing operates through it.
How fast can I get the Emtek 12A5-US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 12A5-US19 come with a warranty?
Absolutely. The Emtek 12A5-US19 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 12A5-US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 12A5-US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    Door handle

    Posted by Lisa on May 8th 2025

    Great look and quality

!