Emtek 2404 American Classic Br...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$61.00
$48.80

Emtek 2404 American Classic Brass Doorbell with Plate & Button - Wilshire Rosette

(No reviews yet) Write a Review

Model: 2404-US26
From the Brass Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$61.00
$48.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Emtek 2404 Brass Doorbell with Plate and Button - Wilshire Rosette

Supplied with matching screws and lighted buttons. Screws are NOT sold separately.


Product Codes:

American Classic

  • with Regular Rosette - 2400
  • with Oval Rosette - 2402
  • with Rectangular Rosette - 2403
  • with #8 Rosette - 2408
  • with Quincy Rosette - 2409
  • with Watford Rosette - 2466
  • with Wilshire Rosette - 2404

American Designer

  • with Rope Rosette - 2401
  • with Lancaster Rosette - 2406
  • with Ribbon and Reed Rosette - 2407

Arts and Crafts:

  • with Arts and Craft Rosette - 2451
  • with Hammered Rosette - 2452

Contemporary:

  • with Modern Rosette* - 2457
  • with Disk Rosette - 2458
  • with Square Rosette - 2459
  • with Neos Rosette* - 2460
  • with Modern Rectangular Rosette - 2463
  • with Urban Modern Rosette - 2465

STRETTO:

  • with 1-1/2" x 5" Rosette STRETTO Plate - 2440
  • with 1-1/2" x 11" Rosette STRETTO Plate - 2441

Sandcast Bronze:

  • with Sandcast Bronze #1 Rosette - 2421
  • with Sandcast Bronze #2 Rosette - 2422
  • with Sandcast Bronze #3 Rosette - 2423
  • with Sandcast Bronze #4 Rosette - 2424
  • with Sandcast Bronze #6 Rosette - 2425

Tuscany (Lost Wax Cast Bronze):

  • with #11 Rosette - 2411
  • with #12 Rosette - 2412
  • with #14 Rosette - 2414
  • with #15 Rosette - 2415

Wrought Steel:

  • with Wrought Steel #1 rosette - 2431
  • with Wrought Steel #2 rosette - 2432
  • with Wrought Steel #3 rosette - 2433

 

 

Specifications:

  • Material: Brass
  • Button: Lighted
  • Includes: Matching screws

Product Specs

Subcategory:
Doorbell Buttons
Collection:
Brass
Product Type:
Doorbell Buttons
Product Group:
Door Trim and Accessories
Product Subgroup:
Doorbell Buttons
Commercial/Residential:
Residential
Series:
Wilshire
Theme:
American Classic
Electronic:
Yes
MAP Policy:
Yes
Product Model:
2404
Product Style:
American Classic
Product Material:
Brass
Product Category:
Door Trim and Accessories
Product Substrate:
Brass
Department:
Door Hardware

Emtek 2404-US26 – Frequently Asked Questions

1) Does the Emtek 2404 doorbell come with the button, or do I order the plate and button separately?
The 2404 ships as a complete unit: the Wilshire rosette plate, a lighted push button, and matching screws in the same finish. The screws are not sold separately, so if you lose them you're sourcing your own fasteners. Nothing else to add on the order form beyond picking a finish.
2) What finishes does the Emtek 2404 Wilshire doorbell come in so I can match my existing entry hardware?
Ten finishes: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), and French Antique (US7). Those are standard US finish codes, so match the code on your existing Emtek entry set or handleset and the doorbell will read as part of the same suite. The screws come in the matching finish too.
3) I want a different rosette shape than the Wilshire. What other Emtek American Classic doorbell plates are there?
Emtek's American Classic brass doorbells run across seven rosette shapes, and the model number is what changes: 2400 regular, 2402 oval, 2403 rectangular, 2404 Wilshire, 2408 the #8 rosette, 2409 Quincy, and 2466 Watford. Same brass construction and lighted button across them, so pick on the shape that suits the door casing. If you want a longer vertical plate instead of a rosette, the STRETTO plates are 2440 at 1-1/2 by 5 inches and 2441 at 1-1/2 by 11 inches.
4) Is the Emtek 2404 doorbell button lighted, and does that mean it needs its own power?
The button is lighted. It's an illuminated pushbutton wired into a standard low-voltage doorbell circuit, the same two transformer-fed wires that feed an unlit button, so there is no separate supply to run. It is an electronic device, not a purely mechanical plate.
5) Is the Emtek 2404 doorbell suitable for a commercial building or is it a residential part?
Emtek lists the 2404 as residential. It's a decorative brass entry doorbell meant for houses and multi-family entries where the look matters and it will be pressed a handful of times a day. For a high-traffic commercial entrance, a lobby door, or anything on an access control system, this isn't the part to spec.
6) What is the Emtek 2404 doorbell plate made of, and will it hold up outdoors?
Solid brass, both the plate and the substrate. Brass is the usual choice for exterior entry trim because it doesn't rust. One finish choice matters here: Unlacquered Brass (US3NL) is left bare and will patina and darken with weather and handling, which is the point of it. If you want the finish to stay put on a covered or uncovered entry, take Polished Brass Lifetime (US3) or one of the plated finishes instead.
7) I have Emtek bronze or wrought iron hardware. Is there a matching doorbell instead of the brass one?
Yes, and you'd want a different model number rather than the 2404. Emtek's sandcast bronze doorbells are 2421 through 2425 (#1, #2, #3, #4 and #6 rosettes), the Tuscany lost wax cast bronze ones are 2411, 2412, 2414 and 2415, and the wrought steel ones are 2431, 2432 and 2433. The 2404 is the brass collection, so it will match brass and plated entry sets, not a cast bronze or wrought steel suite.
8) Can I use the Emtek 2404 to replace my existing doorbell button without rewiring?
In most cases yes, because it's a plate and pushbutton on the same low-voltage bell wire your current button uses, not a new system. What to check before you order is the mounting: the Wilshire rosette is a round decorative plate, so if you're coming off a tall rectangular builder button you may be left with exposed paint or drilling outside the old footprint. Hold the rosette over the existing opening and confirm it covers before you pull the old one.
9) If I'm building out a whole entry, does Emtek make a contemporary doorbell instead of a traditional rosette?
The 2404 Wilshire is a traditional American Classic shape. For a modern entry the contemporary doorbells are 2457 Modern, 2458 Disk, 2459 Square, 2460 Neos, 2463 Modern Rectangular and 2465 Urban Modern. There's also an Arts and Crafts pair, 2451 and 2452 hammered, and an American Designer group with 2401 rope, 2406 Lancaster and 2407 ribbon and reed. Choose on which family your entry set already belongs to.
How fast can I get the Emtek 2404-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 2404-US26 come with a warranty?
Absolutely. The Emtek 2404-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 2404-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 2404-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.