Emtek 3022 Topeka Sandcast Bronze Mortise Entrance Handleset - Dummy

It's a dummy, non-keyed. The Topeka 3022 handleset is surface mounted trim that gives you the look and the grip of a mortise entrance set with no working latch and no cylinder. Use it on an inactive leaf of a double door or on a door that stays shut by other means. If you need the door to latch and key, you want the keyed entrance version of the mortise set instead.

Yes, handing is specified. The Topeka sandcast bronze mortise handleset is ordered left hand or right hand, and Emtek requires handing on all of its mortise sets. Stand outside the door: if the hinges are on your left it's left hand, hinges on the right is right hand. Order the wrong hand and the thumbpiece and lever throw sit backwards on the door.

You pick it, and it's a required choice on the order. The Topeka set is sold complete with the inside trim you select from the Sandcast Bronze range: levers include Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma, and knobs include Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. That lets you match the inside trim to whatever else is already running through the house.

1-3/4 inches is the standard build, which is the usual exterior door thickness. Thicker doors are handled, but you have to call the thickness out when you order so the spindles and screw lengths come correct. There's a door thickness field on the order for exactly that.

Standard mortise prep to ANSI A115.1, with a 2-1/2 inch or 2-3/4 inch backset. If your door is already mortised for a commercial-standard mortise lock at one of those backsets, the pocket and face cutout line up. Tubular-bored doors will not take it without re-prepping the door edge.

The Emtek 3022 Topeka is a dummy-function handleset in sandcast bronze. Two other dummy handlesets to consider are the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever, from the Premiere Essentials Series with a 1-3/8 inch to 2 inch door thickness range, and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob from the Elegance Series, also 1-3/8 inch to 2 inch. Both are dummy function like the 3022, so they are inactive trim rather than latching hardware.

The Emtek 3022 Topeka is non-keyed dummy trim, so it will not latch or lock. For a keyed opening, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is Grade 2 with a 1-3/8 inch to 1-3/4 inch door thickness range, and the Baldwin Estates 6542 Tremont Single Cylinder Entry Mortise Trim is an entrance-function mortise trim for 1-3/4 inch doors. The Baldwin 6542 stays in mortise prep like the Emtek; the Schlage F60 is a bored-door handleset.

The Emtek 3022 Topeka is 1-3/4 inch standard door thickness, with thicker doors specified at order. For a 1-3/8 inch door, the Pamex FS7P31 Lexington Single Cylinder Handleset covers 1-3/8 inch to 1-3/4 inch, the Schlage Residential JE285 Barcelona handleset with Seville lever covers 1-3/8 inch to 1-3/4 inch as a Grade 2 non-keyed entry set, and the Deltana 810871 Montego Handleset covers 1-3/8 inch to 2 inch.

That's one of the normal uses for it. Because it's dummy function with no latch or cylinder, it mounts on the inactive leaf and matches the active leaf's working Topeka mortise set in the same sandcast bronze finish, so the pair reads identical from the street. Still specify the hand so the thumbpiece and inside trim orient correctly on that leaf.

The Emtek 3022 Topeka is a non-electronic dummy handleset. For keypad or app entry, the Yale Real Living BYRD226NRRX Assure Lock Standalone Touchscreen Deadbolt with Ridgefield Handleset and the BYRD226CBARX Wi-Fi and Bluetooth version both cover 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset with Halifax lever pairs a handleset with a Smartcode electronic deadbolt for 1-3/4 inch doors. All three are keyed or credentialed openings rather than inactive trim.

No. The Emtek 3022 Topeka is sold as a complete set with a required knob or lever selection for the inside trim. If you want exterior-only trim, the Kwikset 687AMD SMT Amador Single Cylinder Handleset is Grade 3, exterior only, for 1-3/4 inch doors, as is the Kwikset 687BW SMT Belleview. The Amador is also offered with an SC1 keyway as the 687AMD SMC.

Handing is required on the Emtek 3022 Topeka - it is ordered left hand or right hand, as with all mortise locks. If you would rather not commit to a hand, the Sure-Loc Madison, Coral, and Alta handlesets are handleset-function sets with adjustable backset, and the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob covers 1-3/8 inch to 2 inch doors. Those are bored-door sets, so the door prep differs from the Emtek's mortise prep.

The Emtek 3022 Topeka is bronze in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze. For solid brass, Deltana offers the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, all solid brass entry handlesets. Note those are entry function while the Emtek 3022 is dummy, so they latch where the Emtek is inactive trim.

The Emtek 3022 Topeka is classified residential and is dummy function, so it carries no latching duty. If you need a stated ANSI grade, the Master Lock HDLB Series HDLBA0615/4D single cylinder deadbolt handleset is Grade 2 entrance, the Schlage Residential F60 Addison is Grade 2 with a 1-3/8 inch to 1-3/4 inch door range, and the Kwikset 687BW Belleview is Grade 3 exterior trim for 1-3/4 inch doors.

Residential. The Topeka sandcast bronze set is catalogued as a residential handleset, and the styling sits in Emtek's rustic bronze range. For a commercial job carrying a grade requirement, look at graded residential/light commercial options like the Schlage F60 Addison (Grade 2, 1-3/8 to 1-3/4 inch doors) or the Master Lock HDLB Series Grade 2 handleset.