Emtek 3029 Sonoma Sandcast Bronze Mortise Entrance Handleset - Dummy
- Can be ordered with any Sandcast Bronze Knob or Lever for the inside trim
- Sold as complete set.
- Handing required for All Mortise Locks
Specifications:
- Backset: 2-1/2" or 2-3/4"
- Door Prep: Standard Mortise ANSI A115.1
- UL Function: ANSI F20 or F13
- Door Thickness: 1-3/4" standard (specify if thicker)
- Keyway: Schlage C
- Handing: Required – specify left or right
- Fire Rating: UL 180 minute
Manufacturer Resources
Product Specs
- Subcategory:
- Mortise Entry Sets
- Collection:
- Sandcast Bronze
- Product Type:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Mortise Locks and Trim
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Lock Type:
- Mortise
- Keyed:
- No
- Lock Function:
- Dummy
- Series:
- Sonoma
- Theme:
- Rustic Living
- Electronic:
- No
- Handle Type:
- Handleset
- MAP Policy:
- Yes
- Product Model:
- 3029
- Product Function:
- Dummy
- Product Style:
- Sandcast Bronze
- Product Material:
- Bronze
- Product Category:
- Mechanical Locks
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 3029-RH-FB – Frequently Asked Questions
1) Do I have to specify handing on the Emtek Sonoma 3029 mortise handleset?
Yes, handing is required. It's ordered as either Left Hand (LH) or Right Hand (RH), and all Emtek mortise sets require handing. Stand outside the door: if the hinges are on your left it's a left hand door. Getting this wrong means the thumbpiece and lever/knob orientation come out backwards.
2) What door thickness does the Emtek 3029 handleset fit, and can I use it on a thicker door?
Standard build is for a 1-3/4 inch door, which is the usual thickness for an exterior entry door. Thicker doors are handled by specifying the thickness at time of order, and there's a door thickness field on the order for exactly that.
3) What backset and door prep does the Sonoma mortise handleset need?
It takes a standard mortise pocket per ANSI A115.1, with the lock case available in 2-1/2 inch or 2-3/4 inch backset. If your door is already prepped for a standard mortise lock, measure from the door edge to the center of the handle hole to confirm which backset you're matching.
4) Do I pick the inside knob or lever separately on the Emtek 3029?
Yes, and it's a required choice. It ships as a complete set, but you select the interior trim from the Sandcast Bronze range: levers include Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma; knobs include Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence.
5) I need a dummy handleset but my door isn't mortise prepped. What else is there?
The Sonoma 3029 needs a full mortise pocket cut per ANSI A115.1, so it's the wrong choice on a door bored for a tubular set. For a dummy handleset that mounts to a standard bored door, look at the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever or the Weslock 6695 Belmont Dummy Handleset with Impresa Knob, both listed for 1-3/8 to 2 inch doors.
6) What other dummy handlesets can be used on an inactive door instead of the Emtek 3029 Sonoma?
The Emtek 3029 Sonoma is a dummy-function handleset, so it is surface-applied on an inactive or false door rather than latching. Two other dummy handlesets serve the same role: the Weslock 2815 Hillcrest dummy handleset with New Heaven lever, from the Premiere Essentials Series, which fits doors 1-3/8 inch to 2 inch, and the Weslock 6695 Belmont dummy handleset with Impresa knob, from the Elegance Series, fitting the same 1-3/8 inch to 2 inch range. The Emtek 3029 is sandcast bronze and is ordered by handing with a choice of Sandcast Bronze knob or lever inside trim; the Weslock units pair with a specified knob or lever as named.
7) I need a keyed entry handleset, not a dummy - what should I order instead of the Emtek 3029 Sonoma?
The Emtek 3029 Sonoma is non-keyed, dummy function, so it will not secure an entry door. For a keyed opening, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2 and fits doors 1-3/8 inch to 1-3/4 inch. The Weslock 1411 Traditionale Colonial handleset with Eleganti knob is single cylinder and fits 1-3/4 inch to 2-1/4 inch doors. Kwikset's 687AMD Amador single cylinder handleset is Grade 3 for a 1-3/4 inch door and is supplied exterior only, with SmartKey in the 687AMD-S and SC1 keyway SmartKey in the 687AMD-SMC.
8) The Emtek 3029 needs a mortise pocket - what entry handleset works on a door bored for a tubular lock?
The Emtek 3029 Sonoma is a mortise lock requiring standard mortise door prep to ANSI A115.1 with a 2-1/2 inch or 2-3/4 inch backset. If the door is bored for tubular hardware instead, the Sure-Loc Alta tubular handleset has an adjustable backset, as do the Sure-Loc Aspen single cylinder keyed entry, Madison keyed entry, and Coral handlesets. The Pamex FS7P31 Lexington single cylinder handleset in satin nickel covers 1-3/8 inch to 1-3/4 inch doors.
9) What finishes does the Emtek Sonoma sandcast bronze handleset come in?
Three sandcast bronze finishes: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). Because the body is cast bronze rather than plated, expect some variation piece to piece, which is what gives the Rustic Living look its character.
10) Can I match the Sonoma dummy handleset with a keyed entry set on the other doors?
Yes. The 3029 is the dummy configuration of the Sonoma mortise entrance handleset, so the same body and trim styling is available in a working keyed mortise version. Emtek mortise entrance sets use the Schlage C keyway, which is what lets you key a run of entry doors alike on a common key.
11) How does this compare to a Baldwin or Schlage entry handleset for a front door?
Different jobs. The Emtek 3029 Sonoma is a non-latching dummy in sandcast bronze, so it's trim only. For a working front door, Baldwin's Estates 6542 Tremont mortise trim comes in single or double cylinder entry for 1-3/4 inch doors and is the closest mortise equivalent; the Schlage Residential F60 Addison with Accent lever is a Grade 2 keyed entry for 1-3/8 to 1-3/4 inch doors on a bored prep rather than a mortise pocket.
12) Is the Baldwin Estates 6542 Tremont a substitute for the Emtek 3029 Sonoma handleset?
They are not interchangeable. The Emtek 3029 Sonoma is a complete mortise entrance handleset sold as a set with exterior handle and a chosen Sandcast Bronze knob or lever inside trim. The Baldwin Estates 6542 Tremont is mortise trim in entrance function for a 1-3/4 inch door, offered as single cylinder or double cylinder. The Baldwin 6542 is trim for a mortise body rather than a dummy set, so specify which of those two roles the opening needs before ordering.
13) What handleset should I use if the opening calls for an electronic deadbolt rather than the Emtek 3029 Sonoma?
The Emtek 3029 Sonoma is a non-electronic mechanical dummy handleset. For a keypad or app-controlled opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior trim with a contemporary SmartCode keypad electronic deadbolt, SmartKey, RCAL latch and RCS strike on a 1-3/4 inch door. Yale Real Living BYRD226NRRX is a standalone touchscreen deadbolt with Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and BYRD226CBARX is the Wi-Fi and Bluetooth version over the same thickness range.
14) My door is thicker than 1-3/4 inch - which handlesets cover that if the Emtek 3029 is ordered standard?
The Emtek 3029 Sonoma is built for a 1-3/4 inch door as standard and accepts a thicker door when the thickness is specified at order. Peers that publish a wider range include the Weslock 1411 Traditionale Colonial single cylinder at 1-3/4 inch to 2-1/4 inch, the Weslock 2810 Hillcrest single cylinder with Hudson knob at 1-3/8 inch to 2 inch, the Deltana 810871 Montego handleset at 1-3/8 inch to 2 inch, and the Yale BYRD256 CBARX key free touchscreen deadbolt with Ridgefield passage handleset at 1-3/4 inch to 2-1/4 inch.
15) What is the difference between the Emtek 3029 Sonoma and the Schlage JE285 Barcelona non-keyed handleset?
Both are non-keyed handlesets, but they are prepped differently. The Emtek 3029 Sonoma is a sandcast bronze mortise handleset in dummy function, requiring mortise prep and handing, with UL 180 minute fire rating. The Schlage Residential JE285 Barcelona with Seville lever is a Grade 2 J Series handleset in entrance function, non-keyed, for doors 1-3/8 inch to 1-3/4 inch. Pick by whether the door is mortised and whether an operating latch is needed or a dummy pull is enough.
16) Are there solid brass entry handlesets comparable in look to the Emtek 3029 Sonoma sandcast bronze?
The Emtek 3029 Sonoma is cast in bronze and offered in Flat Black Bronze, Medium Bronze and Tumbled White Bronze. For a solid brass alternative in entry function, Deltana offers the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston handlesets, all solid brass in entry function. Note the Emtek is dummy function and the Deltana units listed are entry, so confirm the opening needs an operating latch before swapping.
17) Is the Emtek 3029 Sonoma handleset a residential or commercial product?
It's classed as residential door hardware, made of solid bronze. It suits homes, custom residential entries and multi-family or hospitality doors where the look is driving the spec, but it is not positioned as a commercial ANSI Grade lock.
18) Are installation instructions available for the Emtek Sonoma mortise handleset?
Yes. Emtek publishes F20 mortise lock installation instructions along with technical specification sheets covering dimensions and door thickness for the brass UL mortise entrance handlesets, both available as PDFs with the product.
19) Can I use an interconnected lock in place of the Emtek 3029 Sonoma handleset?
They solve different problems. The Emtek 3029 Sonoma is a dummy handleset with no latch or key. The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever in satin stainless steel, Grade 2, for doors 1-3/8 inch to 1-3/4 inch, where retracting the lever also retracts the deadbolt. Choose the interconnected unit only where a latching, keyed egress function is needed; the 3029 is for an inactive leaf.
20) The Emtek 3029 Sonoma is residential - what graded handlesets are available for a higher-traffic opening?
The Emtek 3029 Sonoma Sandcast Bronze handleset is a residential mortise set. If a graded product is required, the Master Lock HDLB Series HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset in entrance function, and the Schlage Residential F60 Addison with Accent lever is Grade 2 in entrance function for 1-3/8 inch to 1-3/4 inch doors. Kwikset's 687BW Belleview single cylinder handleset is Grade 3 for a 1-3/4 inch door.
21) What handleset and knob combinations are comparable to ordering the Emtek 3029 Sonoma with a Sandcast Bronze knob inside?
The Emtek 3029 Sonoma is sold as a complete set and can be ordered with any Sandcast Bronze knob or lever for the inside trim, including Butte, Egg, Round, Winchester and Windsor knobs or Aurora, Durango and Teton levers. For a preset handleset plus knob pairing, Baldwin offers the Wesley handleset with Alcott knob and the Wesley handleset with Carnaby knob, both entrance function. The Baldwin pairings are fixed combinations, while the Emtek inside trim is selected at order.
How fast can I get the Emtek 3029-RH-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 3029-RH-FB come with a warranty?
Absolutely. The Emtek 3029-RH-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 3029-RH-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 3029-RH-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.