Emtek 3025 Rectangular Monolithic Sandcast Bronze Mortise Entrance Handleset - Dummy

It's a dummy, non-keyed function, so there is no latch operation and no cylinder. The Emtek 3025 Rectangular sandcast bronze handleset is surface-applied trim for the inactive leaf of a double door, a fixed French door, or a pantry slab where you want a handle to pull on but no latching. If you need a working entry, order the keyed mortise entrance version of the 3025 instead.

Yes. Handing is required on the 3025, and it's ordered as left hand or right hand. That's because the set follows the mortise trim geometry, and the inside knob or lever plus the thumbpiece have to be oriented to the door. Stand outside the door: if the hinges are on your left it's left hand.

Center-to-center is 5-1/2 inches on the 3025, measured between the fixing points of the monolithic bronze plate. The set is built to a standard mortise prep per ANSI A115.1, so it lines up on a door already prepped for a mortise lock. If your existing prep is a tubular bore rather than a mortise pocket, the plate won't cover it.

1-3/4 inches is the standard door thickness for the 3025, which is the usual commercial and exterior residential slab. Thicker doors are accommodated, but the thickness has to be called out at time of order, and there's a door thickness field for exactly that when you configure the set.

It ships as a complete set, but you choose the interior trim yourself. The 3025 pairs with any Emtek sandcast bronze knob or lever, and there are 25 choices: levers include Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma, and knobs include Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. That selection is required when ordering.

The 3025 requires a standard mortise pocket per ANSI A115.1, which is a lot of prep for a non-latching door. If the slab isn't mortised, look at the Weslock 2815 Hillcrest dummy handleset with New Heaven lever or the Weslock 6695 Belmont dummy handleset with Impresa knob, both listed as dummy function with a 1-3/8 to 2 inch door thickness range.

The Emtek 3025 Rectangular Sandcast Bronze handleset is a dummy function set, so it is surface-applied trim with no latch action. Two other dummy handlesets to consider are the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever, from the Premiere Essentials Series, and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob, from the Elegance Series. Both Weslock dummy sets list a door thickness range of 1-3/8 inch to 2 inch, while the Emtek 3025 is built around 1-3/4 inch doors as standard with thicker doors specified at order.

The Emtek 3025 is a non-keyed dummy set, so it will not secure an opening. For a keyed entrance handleset, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is a Grade 2 F Series set for 1-3/8 inch to 1-3/4 inch doors, and the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob is a single cylinder keyed entry set listed for 1-3/4 inch to 2-1/4 inch doors. If you want to stay with mortise trim, the Baldwin Estates 6542 Tremont Single Cylinder Entry Mortise Trim is an entrance-function mortise trim for 1-3/4 inch doors.

Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). All are part of Emtek's Sandcast Bronze collection, so the living finishes match the other sandcast bronze trim in the same collection across a house.

It's classified residential. For heavy commercial traffic or an opening on a spec that calls for a graded commercial lockset, this isn't the set to bid. It suits high-end homes, hospitality, and multi-family entry doors where the look drives the choice.

Match it with a keyed mortise entrance handleset in the same Emtek Rectangular sandcast bronze series and the same finish so the pair reads as one set. If you'd rather stay with a mortise entry trim from another maker, the Baldwin Estates 6542 Tremont is available in single cylinder or double cylinder entry mortise trim for a 1-3/4 inch door.

The Emtek 3025 is a mortise handleset and requires a standard mortise pocket prep to ANSI A115.1. If the door is not mortised, a tubular-bored set avoids that prep: the Sure-Loc Alta Tubular Handleset comes with an adjustable backset, and the Sure-Loc Aspen and Madison handlesets are also offered with adjustable backset. The Pamex FS7P31 Lexington Single Cylinder Handleset in satin nickel covers 1-3/8 inch to 1-3/4 inch doors.

The Emtek 3025 is a mechanical, non-electronic dummy handleset. For electronic entry, the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset pairs Halifax lever interior trim with a Contemporary SmartCode keypad deadbolt for 1-3/4 inch doors, and the Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth touchscreen operation with a Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors. A standalone touchscreen version without network connection is the Yale BYRD226NRRX with the same Ridgefield handleset.

No. The Kwikset 687AMD Amador is a Grade 3 single cylinder keyed entrance handleset sold as exterior trim only for 1-3/4 inch doors, and the Belleview 687BW is the same arrangement in a different style. The Emtek 3025 is a dummy mortise handleset sold as a complete set with inside knob or lever trim chosen at order, so the two do not swap - one secures a door with a cylinder and the other is inactive trim.

The Emtek 3025 is a dummy set with no latch. If you want non-keyed operation that still latches the door, the Schlage Residential JE285 Barcelona Style Handleset with Seville Lever is a Grade 2 J Series non-keyed entry set for 1-3/8 inch to 1-3/4 inch doors. The Schlage JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever, also Grade 2 and rated for 1-3/8 inch to 1-3/4 inch doors, if you want passage latching plus separate keyed security.

The Emtek 3025 is dummy trim only. For mortise entry trim that keys from both sides, the Baldwin Estates 6542 Tremont Double Cylinder Entry Mortise Trim is an entrance-function set for 1-3/4 inch doors, which matches the 1-3/4 inch standard door thickness the Emtek 3025 is built around. The single cylinder version is the Baldwin 6542 Tremont Single Cylinder Entry Mortise Trim.

Solid bronze. Both the material and the substrate on the 3025 are bronze, and the exterior plate is monolithic sandcast, meaning the handle and plate are one casting rather than a handle screwed to a rosette.

Yes. Emtek publishes F20 mortise lock installation instructions plus a technical specifications sheet covering dimensions and door thickness for the brass UL mortise entrance handlesets, and both are linked on the 3025. Pull the dimension sheet before you cut the pocket.

The Emtek 3025 is a monolithic sandcast bronze handleset offered in Flat Black Bronze, Medium Bronze and Tumbled White Bronze. For solid brass, Deltana offers several entry handlesets in solid brass: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston. The Deltana 810871 Montego handleset covers doors from 1-3/8 inch to 2 inch.

The Emtek 3025 is a residential sandcast bronze mortise handleset carrying a UL 180 minute fire rating and standard mortise ANSI A115.1 door prep. If your spec calls for a stated ANSI grade on a handleset, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is listed as Grade 2, and the Kwikset 687AMD Amador is listed as Grade 3.