Emtek 3031 Da Vinci Lost Wax Cast Bronze Mortise Entrance Handleset - Dummy

Dummy function only. The 3031 Da Vinci handleset has no latch and no key cylinder, so it does not operate or secure anything. It mounts to the face of the door as a pull, which is what you use on the inactive leaf of a pair of doors or on a door that is held shut by a roller catch or ball catch. If you need the door to latch or lock, you need an entrance function set instead.

Yes, handing is required. The 3031 is ordered as either LH or RH, and it is built that way, so a left hand set will not serve a right hand opening. Stand outside the door: if the hinges are on your left it takes a left hand set, hinges on the right takes right hand. Get this wrong and the thumbpiece and grip sit backwards on the door.

Two backsets are offered, 2-1/2 inch and 2-3/4 inch. That is the distance from the door edge to the center of the lock case, and on a mortise prep it is fixed by the pocket already cut in the door. Measure the existing mortise pocket before ordering, because the wrong backset will not line up with the cutout or the face plate.

It preps to standard mortise per ANSI A115.1, so it fits doors already machined to that standard commercial mortise cutout. If your door was cut for a standard mortise lock, the pocket, face plate and trim locations line up. Doors bored for a tubular or cylindrical lock will not take it, that is a different and much smaller prep.

Yes, the inside trim is a required selection and the set ships complete once you pick it. Twenty-five Lost Wax Cast Bronze styles are offered: ten levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma) and fifteen knobs (Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town, Providence). Pick a lever if you want the interior to read as ADA-style operation, a knob if you are matching existing knob trim elsewhere in the house.

The Emtek 3031 Da Vinci is a mortise-prep dummy handleset in cast bronze, so it suits an inactive leaf where the door is already machined for a standard mortise. If your inactive leaf is bored for a tubular lock instead, the Weslock 6695 Belmont dummy handleset with Impresa knob or the Weslock 2815 Hillcrest dummy with New Heaven lever are dummy-function handlesets that cover a 1-3/8 to 2 inch thickness range. The choice is driven by what prep is already in the door, not by looks.

A dummy will not lock anything, so you want an entrance function set. On a mortise-prepped door, the Baldwin Estates 6542 Tremont entry mortise trim is the closest match in kind, available single cylinder or double cylinder, for 1-3/4 inch doors. If the opening is bored for a tubular lock rather than mortised, the Schlage F60 Addison keyed entry handleset with Accent lever is a Grade 2 entrance set covering 1-3/8 to 1-3/4 inch doors.

The Weslock 2815 Hillcrest with New Heaven lever is a dummy-function handleset covering a 1-3/8 inch to 2 inch door thickness range, so it suits doors outside the 1-3/4 inch standard the 3031 is built around and does not call for a mortise pocket. The Emtek 3031 is a mortise-type dummy in cast bronze with handing specified left or right. Both are non-latching trim; the difference is the door prep and the thickness range each covers.

The Emtek 3031 Da Vinci is a dummy, so it does not latch or lock and is meant for the leaf that stays fixed. For the operating leaf, Baldwin's Estates 6542 Tremont entry mortise trim is an entrance-function mortise trim rated for a 1-3/4 inch door and comes in a single cylinder version (6542ENTR) and a double cylinder version (6542DBLC), which keeps the mortise door prep consistent across both leaves.

Several handlesets that resemble it in silhouette are keyed or latching and will not serve as fixed trim. The Kwikset 687AMD Amador and 687BW Belleview are Grade 3 single cylinder keyed entry handlesets for a 1-3/4 inch door, the Schlage F60 Addison with Accent lever is a Grade 2 single cylinder keyed entry handleset, and the Weslock 1411 Traditionale Colonial with Eleganti knob is a single cylinder unit for 1-3/4 inch to 2-1/4 inch doors. The Emtek 3031 is non-keyed dummy trim, so any of these would add a cylinder and a working latch the opening may not want.

The Schlage JE285 Barcelona with Seville lever is a Grade 2 non-keyed handleset for doors 1-3/8 inch to 1-3/4 inch thick, which gives an operating latch without a cylinder. The Emtek 3031 Da Vinci is non-keyed dummy trim in cast bronze that mounts fixed to the door and does not latch at all. Choose by whether the door needs to catch when closed.

The Emtek 3031 Da Vinci uses the Schlage C keyway on its keyed counterparts in the mortise line. Among keyed handlesets, the Kwikset 687AMD SMC Amador is built with the SC1 keyway and SmartKey, which is the Schlage C section, so it can be brought onto the same key. The Kwikset 687AMD SMT version uses SmartKey without the SC1 designation.

Yes, that is the normal use. Emtek's keyed mortise entrance handlesets in the same Lost Wax Cast Bronze program run a Schlage C keyway, so a keyed active leaf can be keyed alike to the rest of a Schlage C system while the 3031 dummy carries the matching grip and thumbpiece on the inactive leaf. Order both in the same finish, Flat Black Bronze or Medium Bronze, and the same interior knob or lever style so the pair reads as one set.

Two Lost Wax Cast Bronze finishes: Flat Black Bronze (FB) and Medium Bronze (MB). Both are available in left hand and right hand. These are cast bronze living finishes, so they patinate with handling and weather rather than staying uniform, which is worth knowing if you are trying to match a set installed years ago on another opening.

It is a residential set. Emtek lists the 3031 for residential use, and the assortment is aimed at high-end homes rather than the cycle counts of an office or multi-family corridor. For a commercial opening with real traffic, look at Grade 2 or better hardware, such as the Master Lock HDLB Series Grade 2 entrance handleset or the Schlage Residential F Series Grade 2 sets, and match to your facility spec.

Sold as a complete set. The exterior grip with thumbpiece and the interior knob or lever you select ship together, so there is no second line item for the inside trim. You still make three calls on the order: finish, handing, and which of the twenty-five Lost Wax Cast Bronze knob or lever styles goes on the inside. Door thickness only needs stating if the door is thicker than 1-3/4 inches.

The Weslock 6695 Belmont is a dummy handleset supplied with the Impresa knob and covers a 1-3/8 inch to 2 inch door thickness range. The Emtek 3031 takes its inside trim as a separate choice, with knob options including Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. So the Weslock arrives as one fixed knob pairing while the 3031 is specified with the knob or lever selected at order.

For the entry doors alongside a 3031 dummy, Deltana offers entry-function solid brass handlesets in several styles: the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston. The Emtek 3031 is lost wax cast bronze in Flat Black Bronze or Medium Bronze, so the brass Deltana sets are a different substrate and finish family rather than a finish match.

The Sure-Loc handlesets with adjustable backset - the AN507 Aspen, AT507 Alta tubular, CR507 Coral and MA507 Madison - are built to take either backset without committing at order. The Emtek 3031 Da Vinci is specified at 2-1/2 inch or 2-3/4 inch backset with handing called out left or right, so the opening has to be measured before it is ordered.

The Emtek 3031 is a non-electronic dummy in a mortise prep, so it carries no electronics. If keypad or app access is needed instead, the Kwikset 815SCEHFL San Clemente pairs a Halifax lever handleset with a Contemporary SmartCode keypad deadbolt for a 1-3/4 inch door, and the Yale Assure BYRD226CBARX combines a Wi-Fi and Bluetooth touchscreen deadbolt with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors. Both replace the fixed-trim approach with a deadbolt bore rather than a mortise pocket.

The Master Lock HDLB Series HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset, and the Schlage F60 Addison with Accent lever is Grade 2 entrance for 1-3/8 inch to 1-3/4 inch doors; the Kwikset 687AMD Amador is Grade 3 entrance for a 1-3/4 inch door. The Emtek 3031 Da Vinci is a residential cast bronze mortise dummy carrying a UL 180 minute fire rating and a standard mortise ANSI A115.1 door prep.

The Emtek 3031 is built for a 1-3/4 inch door as standard with a thicker door specified at order. If a peer sized for thicker stock is preferred, the Weslock 1411 Traditionale Colonial with Eleganti knob covers 1-3/4 inch to 2-1/4 inch, and the Yale BYRD226NRRX Assure standalone touchscreen deadbolt with Ridgefield handleset covers the same 1-3/4 inch to 2-1/4 inch range. The Weslock is a single cylinder mechanical unit and the Yale is a standalone electronic deadbolt set.

Not for the same job. The Baldwin Wesley handleset is an entrance-function set, offered with the Alcott knob (180WYHXATK) or the Carnaby knob (180WYHXCYK). The Emtek 3031 Da Vinci is dummy function, so the Wesley operates and secures the door while the 3031 is fixed trim. They pair well on the same elevation but are not interchangeable on one leaf.

The Emtek 3031 Da Vinci is set up for a 1-3/4 inch door as standard. For thinner stock, the Pamex FS7P31 Lexington single cylinder handleset in satin nickel covers 1-3/8 inch to 1-3/4 inch, and the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch. The Pamex is an entry-function set and the Deltana is from the Montego Handleset series.

Substrate and how it ages. The 3031 is lost wax cast bronze in the Tuscany Bronze collection, offered in Flat Black Bronze and Medium Bronze, both living finishes that darken and patinate with exposure. A plated brass or nickel set such as the Deltana Hanover or St. Ann solid brass handlesets, or the Pamex Lexington in satin nickel, holds a more uniform appearance. If the house has other cast bronze hardware, stay in bronze so the aging matches.