Emtek 3107 Regency Mortise Entrance Lockset - Dummy

The 3107 Regency is a dummy set, so there is no latch and no working spindle. The trim mounts to the door face and the knob or lever is fixed, used as a pull. Typical spots are the inactive leaf of a French pair or a closet door held shut by a ball catch or roller catch, which you order separately. If you need the door to latch, you want a keyed or passage mortise version of the Regency instead.

Handing is required. Emtek calls for left or right on all its mortise sets, and the 3107 is stocked both ways, so a left hand and a right hand version exist in every finish offered. On a dummy the handing controls which way the trim and lever pitch on the door face, so order it to match the leaf it is going on.

1-3/4 inches is the standard build for the Regency mortise sets, and thicker doors are handled by calling out the actual thickness when you order. There is a door thickness entry on the order form for exactly that. If your door is a standard 1-3/4 inch commercial or residential slab, no callout is needed.

Standard mortise pocket per ANSI A115.1, with a 2-1/2 inch or 2-3/4 inch backset. That is the same prep the rest of the Emtek mortise line uses, so a door already mortised for an Emtek entrance set takes the 3107 dummy trim without recutting. On a new door, have the shop cut A115.1 and confirm which of the two backsets your other openings use before the pocket is routed.

That is the point of it. The knob or lever is chosen separately from a full Emtek trim range, covering the brass knobs and levers, the crystal and porcelain knobs, and the marble options, so a dummy on a closet or an inactive French leaf can carry the identical lever as the entrance set beside it. Finishes run oil rubbed bronze (US10B), satin nickel (US15), pewter (US15A), polished chrome (US26), lifetime polished brass (US3), unlacquered brass (US3NL), and French antique (US7), all in both handings.

Emtek classes the Regency mortise line as residential. For an apartment corridor, a school, or anything on a commercial spec with a Grade 1 requirement, look at the Schlage L0170 half dummy trim, which is a Grade 1 mortise non-keyed dummy for 1-3/4 inch doors. The Emtek is the right call for a home, a model unit, or a hospitality interior where the finish and knob style are what matter.

A dummy set like the Emtek 3107 Regency has no latch and no keying at all - it is a pull only. For an opening that needs a working latch with no key, the Schlage PM010 is a Grade 1 non-keyed passage latch mortise lock for 1-3/4 inch doors, and the Hager 3810S is a Grade 1 passage mortise lock with rose on a 2-3/4 inch backset. The Falcon MA101 is a Grade 1 heavy duty mortise passage lock with field reversible operation, which avoids specifying handing.

The Emtek 3107 Regency is a brass, residential-rated dummy mortise entrance set with no keying, ordered left or right hand and paired with any Emtek knob or lever for the inside trim. For a commercial opening, the Schlage L0170 is a Grade 1 heavy duty non-keyed mortise half dummy lever trim in the L Series. Both are dummy function, so neither latches; the difference is the Emtek is brass with a wide knob, crystal and lever selection, while the L0170 is a Grade 1 heavy duty lever trim.

The Emtek 3107 Regency is a non-keyed dummy, so it does not secure anything. For a residential-style mortise body that locks, the Baldwin 6301 is an entry/apartment mortise lock body on a 2-1/2 inch backset, offered knob by knob or, as the 6301LS, lever by lever, both for doors 1-3/4 inch and over. The Baldwin 6310 is an entry/storeroom mortise lock body on the same 2-1/2 inch backset for doors 1-3/8 inch and over. The 3107 shares the 2-1/2 inch backset option, so the mortise pocket layout is familiar.

The Emtek 3107 Regency is a decorative brass set in the American Designer style, not a ligature-resistant product. For those openings the TownSteel MRX-L-01 is a Grade 1 heavy duty anti-ligature lever mortise lockset in stainless steel with passage function for 1-3/4 inch doors, the MRX-A-01 is the same passage function with ligature resistant arch trim in satin stainless steel, and the Marks USA 5PDN is a Grade 1 hospital passage mortise push/pull paddleset, ligature resistant and ADA compliant in satin stainless steel.

No. Unlacquered brass (US3NL) is raw brass with no clear coat, so it darkens and patinas with handling and time. If you want brass that holds its shine, order lifetime polished brass (US3) instead. The body of the set is brass either way.

No cylinder and no keying. The 3107 is non-keyed, mechanical, with no electronics. Nothing to order on the keyway side and nothing to key alike into an existing system.

Four things: finish, handing (left or right), the knob or lever style for the inside trim, and the door thickness if the door is over 1-3/4 inches. The trim style is a required selection, not an accessory, and it is sold as a complete set once those are chosen. There is no separate lock body to order.

That is the common use. Put the dummy on the inactive leaf so both leaves read the same from the room, and run the working lockset on the active leaf. Because the dummy has no latch, hold the inactive leaf with flush bolts or a surface bolt, which are ordered separately. Order the dummy handed to the leaf it sits on.

Handing is required on the Emtek 3107 Regency and must be specified left or right when ordering. Locks that sidestep that call include the Falcon MA101, a Grade 1 heavy duty mortise passage lock with field reversible operation, the BEST 45H heavy duty public entrance mortise lock body, also field reversible, and the Kaba Ilco 185 Series mortise deadbolt, which is listed as no handing.

They are both dummy function but they mount to different things. The Falcon MESC600DT is a dummy escutcheon lever trim made for M9900 Series exit devices, so it belongs on a door already carrying an exit device. The Emtek 3107 Regency is a brass dummy mortise entrance set for a standard mortise pocket, prepped to ANSI A115.1, with the inside knob or lever chosen from the Emtek range. Ordering the Falcon trim for a mortise-prepped door leaves you with hardware that has nothing to attach to.

The Emtek 3107 Regency is a residential brass dummy set carrying a UL 180 minute fire rating and standard ANSI A115.1 mortise prep. Institutional standardization programs typically build around Grade 1 bodies such as the Corbin Russwin ML2003 Grade 1 mortise classroom lockset for 1-3/4 inch doors, the Cal-Royal NM8080 heavy duty Grade 1 storeroom mortise lockset with interchangeable core option, and the Accentra 8805FL Grade 1 storeroom mortise lock in the 8800 Series. The Emtek suits residential-character openings within the same building where a decorative brass pull is wanted.

The Emtek 3107 Regency is a dummy with no latch and no locking, which will not hold a privacy door closed. For privacy, the Hager 3840S is a Grade 1 privacy mortise lock on a 2-3/4 inch backset for doors 1-3/4 to 2 inch, and the Cal-Royal NM8440 is a heavy duty Grade 1 privacy mortise lockset with deadbolt for 1-3/4 inch doors. Both are privacy/bed/bath function.

The Emtek 3107 Regency is a non-electronic brass set using standard ANSI A115.1 mortise prep on a 1-3/4 inch door as standard. Electronic mortise options carry their own door thickness windows and hardware: the Alarm Lock DL3500CR is a Grade 1 electronic classroom mortise lock with 300 user codes for doors 1-5/8 to 1-7/8 inch, the Schlage CO-100 is a Grade 1 heavy duty standalone electronic mortise lock with keypad reader in privacy function for 1-3/4 inch doors, and the TownSteel FME-2000 is a Grade 1 heavy duty classroom mortise lockset with RFID for 1-3/4 inch doors. Verify the reader housing and thickness against the existing opening rather than assuming a straight swap.

No, the door prep is different. The Emtek 3107 Regency is a mortise lock requiring a standard mortise pocket to ANSI A115.1. The Schlage PC10 is a Grade 1 passage cylindrical lock, non-keyed with rose, for 1-3/4 inch doors, and it goes into a bored cylindrical prep. If the door already carries a mortise pocket, the mortise-prep equivalent in non-keyed passage is the Schlage PM010 Grade 1 passage latch mortise lock.

The Emtek 3107 Regency is a dummy set with no bolt of any kind. For bolt-only mortise prep, the Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset in the 4870 Series, which matches one of the two backsets the Regency is built around. The Kaba Ilco 185 Series mortise deadbolt is a no-handing deadbolt option. Where the bolt should be keyless and electronic, the Alarm Lock DL4500 is a Grade 1 electronic mortise deadbolt with 2,000 user codes for doors 1-5/8 to 1-7/8 inch.

The Emtek 3107 Regency is built for 1-3/4 inch doors as standard, with thicker doors handled by specifying the thickness at order. Among mortise peers, the Hager 3810E passage mortise lock with escutcheon and the Hager 3850E office mortise lock with lever and escutcheon both cover 1-3/4 inch to 2-1/2 inch, and the Baldwin 6301 entry/apartment mortise body is listed for 1-3/4 inch and over.

The Emtek 3107 Regency is dummy function only. For a dormitory corridor door the Sargent 7925 is a Grade 1 heavy duty dormitory exit function mortise lock with rose trim and a single cylinder deadbolt in the 7900 Series. For apartment entry, the Baldwin 6301 is an entry/apartment mortise lock body on a 2-1/2 inch backset for doors 1-3/4 inch and over, available knob by knob or as the 6301LS lever by lever.

No. The Sargent 130KB is a standard duty mortise thumbturn in the 8200 Series and the 130W is a standard duty mortise thumbturn with a round backplate in the 7800 Series - both are trim pieces for their own Sargent mortise bodies, not add-on locking for another maker's set. The Emtek 3107 Regency is a complete non-keyed dummy set sold with its inside knob or lever, and adding locking means changing to a lock body that has a bolt.