Emtek 3133 Octagon Lost Wax Ca...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$758.00
$606.40
Emtek 3133 Octagon Lost Wax Cast Bronze Mortise Entrance Lockset - Dummy

Emtek 3133 Octagon Lost Wax Cast Bronze Mortise Entrance Lockset - Dummy

(No reviews yet) Write a Review

Model: 3133-RH-FB
From the Tuscany Bronze Collection
$758.00
$606.40
Selected Handing is
Selected Finish is
Selected Knob or Lever for the inside trim is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$758.00
$606.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 3133 Octagon Lost Wax Cast Bronze Mortise Entrance Lockset - Dummy

- Can be ordered with any Tuscany Bronze Knob, Crystal and Porcelain or Lever
- Sold as complete set.
- Handing required for All Mortise Locks

Product Codes:

Entryset: 3533
Dummy: 3133


 

Specifications:

  • Backset: 2-1/2" or 2-3/4"
  • Door Prep: Standard Mortise ANSI A115.1
  • UL Function: ANSI F20 or F13
  • Door Thickness: 1-3/4" standard (specify if thicker)
  • Keyway: Schlage C
  • Handing: Required – specify left or right
  • Fire Rating: UL 180 minute

Product Specs

Subcategory:
Mortise Entry Sets
Collection:
Tuscany Bronze
Product Type:
Mortise Locks
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Commercial/Residential:
Residential
Keyed Function:
Non-Keyed
Lock Type:
Mortise
Keyed:
No
Lock Function:
Dummy
Series:
Octagon
Theme:
Tuscany
Electronic:
No
MAP Policy:
Yes
Product Model:
3133
Product Function:
Dummy
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 3133-RH-FB – Frequently Asked Questions

1) Does the Emtek 3133 Octagon dummy mortise set actually latch, or is it just trim?
The 3133 Octagon is a dummy set, non-keyed and non-operating. There is no latch to throw and no cylinder. It mounts as fixed trim, which is what you want on the inactive leaf of a double door or on a door held closed by a roller catch or ball catch. If you need the working, keyed version of the same Octagon design, that is the 3533 entryset.
2) Do I have to specify handing on an Emtek 3133 dummy set?
Yes, handing is required. Emtek calls for handing on all of its mortise locks, and the 3133 is offered in left hand (in-swing) and right hand (in-swing). Stand outside the door, facing it: if the hinges are on your left and it swings away from you, that is left hand.
3) What door thickness does the Emtek 3133 Octagon mortise set fit?
It is built for 1-3/4 inch doors as standard, which is the usual thickness on an exterior entry door. Thicker doors are accommodated but you have to call the thickness out when ordering, and there is a door thickness field on the order for exactly that.
4) What backset and door prep does the Emtek Octagon mortise lockset need?
Backset is 2-1/2 inch or 2-3/4 inch, and the pocket prep is standard mortise per ANSI A115.1. If your door is already prepped for a standard ANSI mortise body, the case drops into the existing pocket; you match the backset to what the door was bored for.
5) Can I use the Emtek 3133 on a commercial office or school door?
No. The Octagon 3133 is a residential mortise set, cast bronze decorative trim, with no ANSI/BHMA grade behind it. For a commercial opening that needs Grade 1, look at something like the Corbin Russwin ML2003 classroom mortise lockset or the Cal-Royal NM8050 office/entrance mortise, both Grade 1. If you specifically need a Grade 1 dummy trim, the Schlage L0170 half dummy is the commercial equivalent.
6) What is the commercial-grade equivalent of the Emtek 3133 dummy mortise set for an opening that needs a rated dummy trim?
The Emtek 3133 Octagon is a residential non-keyed dummy mortise lockset in lost wax cast bronze. Where an opening calls for a heavy duty commercial dummy instead, the Schlage L0170 is a Grade 1 mortise non-keyed lever lock in half dummy trim, built for 1-3/4 inch doors in the L Series. The Emtek gives you the Tuscany Bronze knob, crystal, porcelain or lever trim options; the L0170 gives you the Grade 1 heavy duty designation.
7) I need a working latch on the door, not a dummy - what do I order instead of the Emtek 3133?
The 3133 is the dummy version and has no latch; the keyed entry counterpart in the same Octagon mortise family is product code 3533. If the door is commercial and needs a latching non-keyed function, the Schlage PM010 is a Grade 1 passage latch mortise lock for 1-3/4 inch doors, and the Hager 3810S is a Grade 1 passage mortise lock with rose on a 2-3/4 inch backset for doors 1-3/4 inch to 2-1/2 inch.
8) Does the Emtek 3133 work for a bedroom or bathroom door that needs to lock?
No. The 3133 is a non-keyed dummy - it is fixed trim with no latching or locking mechanism, so it suits an inactive leaf or a closet face. For a door that must lock from inside, the Cal-Royal NM8440 is a Grade 1 privacy mortise lockset with deadbolt for 1-3/4 inch doors, and the Hager 3840S is a Grade 1 privacy mortise lock on a 2-3/4 inch backset for doors 1-3/4 inch to 2 inch.
9) Do I pick the inside knob or lever separately on the Emtek 3133?
Yes, and it is a required choice. The 3133 ships as a complete set, but you select the interior trim from sixteen options: Medici, Napoli, Octagon, and Padua levers, Octagon, Parma, Petal, Diamond, Georgetown, Old Town, Bristol, Hampton, Lowell, and Windsor knobs, plus Ebony and Ice White porcelain knobs.
10) I need the keyed version to match a dummy Octagon on the other leaf. What keyway does it use?
The working Octagon entryset, model 3533, uses a Schlage C keyway, so it keys into an existing Schlage C system. The 3133 dummy itself is non-keyed, so pairing the two across a set of double doors gives you a matched look with one operating leaf.
11) Is the Emtek Octagon mortise lockset fire rated?
The Octagon mortise line carries a UL 180 minute fire rating, and the functional version is listed under ANSI F20 or F13. Note that a dummy set has no latching mechanism, so on a labeled opening the rating depends on the active, latching hardware, not on fixed dummy trim.
12) Is the Falcon MESC600DT the same kind of dummy as the Emtek 3133?
Both carry a dummy function, but they mount to different things. The Emtek 3133 is a mortise dummy entrance lockset in cast bronze that preps to a standard mortise pocket, ANSI A115.1, and requires handing. The Falcon MESC600DT is dummy escutcheon lever trim made for M9900 Series exit devices, so it is trim for an exit device opening rather than a mortise-prepped door.
13) What bronze-style mortise lock body pairs with an entry door if the Emtek 3133 dummy is going on the inactive leaf?
For the active leaf, the Baldwin 6301 is an entry/apartment mortise lock body on a 2-1/2 inch backset for doors 1-3/4 inch and over, available knob by knob or lever by lever as the 6301LS. The Emtek 3133 uses a 2-1/2 inch or 2-3/4 inch backset with a standard ANSI A115.1 mortise prep, so both sit in a common backset range for a pair of doors.
14) My door is not mortise prepped - is there a simpler non-keyed option than the Emtek 3133?
Yes. The 3133 requires a standard mortise pocket per ANSI A115.1 and handing must be specified. If the door is bored rather than mortised, the Schlage PC10 is a Grade 1 non-keyed passage cylindrical lock with rose for 1-3/4 inch doors, which installs into a cylindrical prep instead.
15) What finishes does the Emtek Octagon 3133 come in?
Two: Flat Black Bronze (FB) and Medium Bronze (MB). Both are on lost wax cast bronze from Emtek's Tuscany Bronze collection, so they are living finishes that will shift with handling and weather rather than stay uniform like a plated brass.
16) Can I mix the Octagon exterior plate with a different Emtek knob inside?
Yes. The 3133 accepts any Tuscany Bronze knob, crystal or porcelain knob, or lever as the interior trim, so you can run the Octagon face outside and something like the Ice White porcelain or Windsor knob on the room side.
17) If I want keypad or credential access instead of the Emtek 3133 trim, what mortise options cover that?
The Emtek 3133 is a non-electronic dummy set. For electronic mortise openings, the Alarm Lock DL3500CR is a Grade 1 Trilogy electronic mortise lock with 300 user codes and classroom function for doors 1-5/8 inch to 1-7/8 inch, the Schlage CO-100 is a Grade 1 standalone electronic mortise lock with keypad reader in privacy function for 1-3/4 inch doors, and the TownSteel FME-2000 is a Grade 1 classroom mortise lockset with RFID for 1-3/4 inch doors.
How fast can I get the Emtek 3133-RH-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 3133-RH-FB come with a warranty?
Absolutely. The Emtek 3133-RH-FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 3133-RH-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 3133-RH-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!