Emtek 4411 Marietta Single Cylinder Entrance Handleset - Brass Tubular

Handing is required on every order, left or right. It matters if you put a lever on the inside, or if you add the interconnect device. Stand outside the door: if the hinges are on your right, it's right hand. Get it wrong with a lever and the lever points the wrong way.

It ships with a Schlage C keyway as standard, so it can be keyed into an existing Schlage C system. Keying is chosen on the order: keyed different or keyed alike, with a field for keying to an existing code. If your building is on Weiser, the same handleset is available with a Weiser WR5 keyway at no cylinder upcharge and can be keyed into an existing Weiser system.

No. The Marietta 4411 tops out at 2 inch door thickness. For a 2-1/4 inch door, look at the Weslock 1411 Traditionale Colonial handleset, rated 1-3/4 to 2-1/4 inches, or the Yale Real Living BYRD226NRRX Assure touchscreen deadbolt with Ridgefield handleset, also 1-3/4 to 2-1/4 inches.

Yes. Backset is a required selection, 2-3/8 or 2-3/4 inches. The 2-3/8 latch ships by default, so you have to call out 2-3/4 inches or you'll get a latch that won't reach your existing strike. Measure from the door edge to the center of the bore before ordering.

No. The Emtek 4411 Marietta fits doors 1-3/8 inch to 2 inch thick. For a 2-1/4 inch door, the Weslock 1411 Traditionale Colonial single cylinder keyed entry handleset with Eleganti knob covers 1-3/4 inch to 2-1/4 inch. If an electronic deadbolt is acceptable, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset and the BYRD226CBARX Wi-Fi and Bluetooth version both cover 1-3/4 inch to 2-1/4 inch as well.

The Emtek 4411 Marietta is a solid brass, single cylinder entry handleset with a 5-1/2 inch center-to-center handle spread and a tubular lock body. The nearest solid brass peers are Deltana's entry handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, all solid brass handlesets in entry function. The Deltana 810871 Montego covers the same 1-3/8 inch to 2 inch door thickness range the Marietta does. The main practical difference is the inside trim: the Marietta is ordered with a separate knob or lever selection and requires handing when a lever is used inside, while the Deltana sets are supplied as their own configurations.

The Emtek 4411 Marietta is a residential brass handleset ordered as a configured set: finish, keyway, handing, backset, inside knob or lever, and keying are all selected at order time. For a rental where a stock configuration is enough, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is a Grade 2 F Series set for 1-3/8 inch to 1-3/4 inch doors, and the Master Lock HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset in the HDLB Series. Kwikset's 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 and fit 1-3/4 inch doors, but they ship exterior only, so the inside trim is a separate purchase.

Three families come up in searches and will not do the same job. The Weslock 6695 Belmont with Impresa knob and the Weslock 2815 Hillcrest with New Heaven lever are dummy function, so they have no latch and no cylinder even though they fit the same 1-3/8 inch to 2 inch doors the Marietta does. The Schlage Residential JE285 Barcelona with Seville lever is a non-keyed entry handleset. And the Baldwin Estates 6542 Tremont entry trim, in both the single cylinder 6542ENTR and double cylinder 6542DBLC versions, is mortise trim for a 1-3/4 inch door, so it needs a mortise pocket rather than the 2-1/8 inch cross bore and 5-1/2 inch center-to-center bored prep the Marietta uses.

The Emtek 4411 Marietta is supplied with a Schlage C keyway as standard, or a Weiser WR5 keyway when W is added to the front of the product code, with no upcharge for that cylinder substitution and the ability to key into an existing Weiser system. It is not a SmartKey lock. For a SmartKey system, the Kwikset 687AMD SMT Amador and 687BW SMT Belleview are Grade 3 single cylinder handlesets with SmartKey for 1-3/4 inch doors, exterior only, and the 687AMD SMC version is SmartKey on an SC1 keyway. The Kwikset 815SCEHFL San Clemente carries SmartKey on its electronic deadbolt.

The 4411 Marietta is a tubular entry handleset with a single cylinder: keyed from outside, thumbturn inside. It's a bored tubular lock, not a mortise lock, so the prep is the standard 2-1/8 inch bore rather than a mortise pocket.

Yes, by adding the Emtek 443 Interconnect Device as an option. That links the interior lever or knob to the deadbolt so one motion retracts both, which is what egress-conscious jobs usually want. Handing must be specified when the interconnect is ordered, and the interconnect isn't offered on the double cylinder version.

Any Emtek brass knob or lever can be paired as the inside trim, which is why the interior style is a required selection when you order. The range runs from traditional (Providence, Waverly, Victoria knobs, Rope and Ribbon and Reed) through crystal (Windsor, Bristol, Georgetown) to contemporary bar and knurled designs (T-Bar, R-Bar, L-Square, Conical). Pick a lever and you also have to give handing.

It's a residential-duty brass handleset, best suited to houses, condo unit doors and light multi-family use. For a commercial opening that has to take traffic and code scrutiny, a bored lockset carrying a stated ANSI grade is the safer route, such as the Schlage Residential F60 Addison handleset (Grade 2) or the Master Lock HDLB Series Grade 2 single cylinder deadbolt handleset.

The Emtek 4411 Marietta is a non-electronic mechanical handleset keyed to a Schlage C or Weiser WR5 cylinder. For keypad or app entry on the same door, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior with a contemporary SmartCode keypad electronic deadbolt, SmartKey cylinder, RCAL latch and RCS strike, for 1-3/4 inch doors. On the Yale side, the BYRD226NRRX Assure Lock is a standalone touchscreen deadbolt with Ridgefield handleset, the BYRD226CBARX adds Wi-Fi and Bluetooth, and the BYRD256 CBARX is a key free touchscreen deadbolt with Ridgefield passage handleset on Wi-Fi. Note that the key free Yale sets use a passage handleset, so there is no mechanical key override at the handle the way the Marietta gives you.

The Emtek 4411 Marietta can be ordered with the Emtek 443 Interconnect Device, and handing must be specified when an interconnect is used. A factory built alternative is the Schlage Residential JI18/19, a JI Series Grade 2 interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel for 1-3/8 inch to 1-3/4 inch doors. The difference for the installer is that the JI18/19 is a fixed interconnected assembly, while the Marietta reaches interconnect as an added device on a brass handleset whose inside knob or lever is chosen separately.

The Emtek 4411 Marietta ships as a complete set with latch and strike plate, and the inside knob or lever is chosen from the Emtek brass trim range. If you would rather order a pre-matched pairing, the Baldwin Wesley handleset comes as 180WYHXATK with the Alcott knob and 180WYHXCYK with the Carnaby knob, both entrance function. The Weslock 2810 Hillcrest is a Premiere Essentials single cylinder handleset supplied with the Hudson knob for 1-3/8 inch to 2 inch doors, the same door range the Marietta covers. The Pamex FS7P31 Lexington is a single cylinder entry handleset in satin nickel for 1-3/8 inch to 1-3/4 inch doors.

Ten finishes: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4) and French Antique (US7). All ten are offered with either the Schlage or the Weiser keyway. Unlacquered brass is the one to pick if you want it to patina; the lifetime finishes are the ones that stay put. There's also a split finish field if you want the exterior and interior different.