Emtek 4421 Marietta Double Cyl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$583.00
$466.40
Emtek Emtek 4421 Marietta Double Cylinder Entrance Handleset - Brass Tubular EMTEK-4421

Emtek 4421 Marietta Double Cylinder Entrance Handleset - Brass Tubular

(No reviews yet) Write a Review

Model: 4421-US15
From the Brass Collection
$583.00
$466.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$583.00
$466.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 4421 Marietta Double Cylinder Entrance Handleset - Brass Tubular

  • Can be ordered with any Brass Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Brass
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Double Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Marietta
Theme:
American Classic
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
4421
(CTC) Center-to-Center:
5-1/2"
Product Function:
Double Cylinder
Product Style:
American Classic
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 4421-US15 – Frequently Asked Questions

1) Will the Emtek 4421 Marietta handleset fit my existing door prep?
The Marietta 4421 uses the standard 2-1/8 inch cross bore and a 5-1/2 inch center-to-center spacing between the handle's upper cylinder and the lower bore. Backset is either 2-3/8 or 2-3/4 inches, and you pick which one when ordering. Door thickness range is 1-3/8 to 2 inches. If your existing door was prepped for a 5-1/2 inch CTC handleset with a 2-1/8 inch bore, it drops in.
2) What does double cylinder mean on the Emtek Marietta entrance handleset, and where can I use it?
Double cylinder means it's keyed on both sides, no thumbturn inside. You need the key to get out as well as in. That's the usual choice on a door with glass next to it or in it, where a burglar could reach through and turn a thumbturn. Be aware some jurisdictions restrict key-both-sides locks on a required egress door in a dwelling, so check your local code before you specify it. If you'd rather have a thumbturn inside, order the single cylinder version of the Marietta instead.
3) Do I have to specify handing on the Emtek 4421 Marietta handleset?
Handing is required, left or right, and you specify it on the order. It matters because the inside trim can be a lever, and a lever has to point the right way. Even if you're pairing it with a knob, handing is called out as a required selection on the Marietta, so get the swing right: stand outside the door, if the hinges are on your right it's right hand.
4) Can I key the Emtek Marietta handleset into my existing Schlage or Weiser keys?
Both keyways are available. Standard is Schlage C. For a Weiser system, order the WR5 keyway version and it can be keyed into an existing Weiser setup, with no upcharge for the cylinder substitution. Keying to code is offered, and you can also order keyed alike if you want several openings on one key.
5) My front door is 2 inches thick. What handlesets will work?
The Emtek 4421 Marietta covers 1-3/8 through 2 inches, so a 2 inch door is within range. Among other handlesets, the Deltana 810871 Montego and the Weslock 2810 Hillcrest also list 1-3/8 to 2 inches. If your door runs thicker than 2 inches, the Weslock 1411 Traditionale Colonial is listed for 1-3/4 to 2-1/4 inches. A lot of common handlesets, including the Kwikset 687 Amador and Belleview, are listed for 1-3/4 inch doors only.
6) I need a key on both sides for a door with glass next to it - is the Emtek 4421 the only double cylinder handleset option?
The Emtek 4421 Marietta is a double cylinder entrance handleset, keyed on both the outside and the inside. The other double cylinder option is the Baldwin Estates 6542 Tremont Double Cylinder Entry Mortise Trim, which is entrance function and listed for 1-3/4 inch doors. The difference that matters on the job: the 4421 Marietta is a tubular lock using a 2-1/8 inch cross bore and 5-1/2 inch center-to-center prep, while the Baldwin 6542 is mortise trim and needs a mortise pocket in the door edge.
7) What should I use instead of the Emtek 4421 Marietta if I only want a key on the outside?
The Emtek 4421 Marietta is keyed on both sides as a double cylinder. For an outside-key-only opening, single cylinder handlesets include the Baldwin Estates 6542 Tremont Single Cylinder Entry Mortise Trim for 1-3/4 inch doors, the Schlage Residential F60 Addison with Accent lever, a Grade 2 unit for 1-3/8 to 1-3/4 inch doors, and the Weslock 2810 Hillcrest with Hudson knob for 1-3/8 to 2 inch doors. Many jurisdictions restrict double cylinder locks on required egress doors, so confirm local code before specifying either function.
8) Can I key the Emtek 4421 Marietta into an existing system, or do I need a different brand?
The Emtek 4421 Marietta ships standard with a Schlage C keyway and can be ordered with a Weiser WR5 keyway instead by adding a W to the product code, which lets it key into an existing Weiser system with no cylinder upcharge. If your existing system runs on Kwikset SmartKey, the Kwikset 687AMD Amador handleset is offered in SmartKey and in an SC1 keyway SmartKey version, and the Kwikset 687BW Belleview is SmartKey as well.
9) What comes in the box with the Emtek 4421 Marietta handleset?
It ships as a complete set: exterior handleset, the interior knob or lever you select, latch and strike plate. The standard latch is set up for a 2-3/8 inch backset, so if your door is bored at 2-3/4 you have to call that out when ordering. The interior trim is a required selection, not an extra, so nothing else is needed to finish a standard door.
10) Can I choose a different knob or lever for the inside of the Emtek Marietta handleset?
Yes, and you have to. The inside trim is a required selection with roughly ninety Emtek brass knobs and levers to choose from, including crystal options like the Windsor and Georgetown, knurled and marble T-Bar and L-Square styles, and traditional levers such as Milano, Turino and Rope. If you pick a lever, handing becomes critical. There's also a split finish option if you want the inside trim in a different finish from the exterior handle.
11) Is the Emtek Marietta handleset suitable for a commercial entrance?
It's built and catalogued as residential hardware, solid brass, tubular lock type. For a house, townhome or an apartment unit entry door where appearance matters, it's the right kind of product. For a commercial opening that needs a graded, cycle-tested lock, look at a Grade 2 or Grade 1 product instead; among comparable handlesets, the Schlage Residential F60 Addison is listed as Grade 2 and the Master Lock HDLB Series single cylinder deadbolt handleset is Grade 2 as well.
12) I'm not sure of my backset. Is there a handleset that handles both without specifying?
On the Emtek Marietta you choose backset at order time, 2-3/8 or 2-3/4 inches, and the latch ships set for 2-3/8 unless you call out 2-3/4. If you're measuring a lot of doors and want one part that covers either, the Sure-Loc handlesets are listed with an adjustable backset, including the Aspen AN507, Alta AT507, Coral CR507 and Madison MA507. Measure from the door edge to the center of the bore to confirm which you have.
13) Is a Yale Assure or Kwikset SmartCode handleset a substitute for the Emtek 4421 Marietta?
No. The Emtek 4421 Marietta is a mechanical, non-electronic double cylinder handleset. The Yale Real Living BYRD226CBARX Assure Lock pairs a Wi-Fi and Bluetooth touchscreen deadbolt with the Ridgefield handleset for 1-3/4 to 2-1/4 inch doors, and the Kwikset 815SCEHFL San Clemente handleset uses a Contemporary SmartCode electronic deadbolt on 1-3/4 inch doors. Those need battery power and a deadbolt bore, and their inside trim is the keypad or thumbturn assembly rather than the keyed inside cylinder the 4421 carries.
14) What is another solid brass entrance handleset if the Emtek 4421 Marietta is not the right look?
The Deltana 803871B Hanover handleset is a solid brass entry handleset, as are the Deltana 815871 St. Ann and Deltana 825871 Kingston. All three are entry-function handlesets in solid brass, the same material as the Emtek 4421 Marietta, which is built of brass with a brass substrate. Choose among them on escutcheon shape and grip style, since the function is the same.
15) Which handleset has a published grade if my spec calls one out? The Emtek 4421 Marietta is residential.
The Emtek 4421 Marietta is a residential brass handleset. If the drawing calls for a stated grade, the Schlage Residential F60 Addison with Accent lever is Grade 2 for 1-3/8 to 1-3/4 inch doors, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 for 1-3/4 inch doors. Note those are single cylinder or deadbolt-based units rather than double cylinder.
16) Is the Emtek 4421 Marietta a substitute for an interconnected lock?
No. The Emtek 4421 Marietta is a bored tubular handleset with a 2-1/8 inch cross bore and 5-1/2 inch center-to-center prep, double cylinder function. The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever, Grade 2, for 1-3/8 to 1-3/4 inch doors, where retracting the latch and deadbolt happens in one motion from the inside lever. If the opening was specified interconnected, the 4421 will not meet that requirement.
17) What is a simpler alternative to the Emtek 4421 Marietta if I do not need 90 interior trim choices?
The Emtek 4421 Marietta requires selecting an inside knob or lever, handing, backset, and keying at order time. If you want a single configured part, the Pamex FS7P31 Lexington is a single cylinder entry handleset supplied in satin nickel for 1-3/8 to 1-3/4 inch doors, and the Baldwin Wesley handleset comes pre-paired as 180WYHXATK with the Alcott knob or 180WYHXCYK with the Carnaby knob, both entrance function. Those trade the configurability for a fixed combination.
18) What finishes does the Emtek Marietta 4421 come in?
Ten finishes: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4) and French Antique (US7). All ten are offered with either keyway. Unlacquered brass will patina over time, which is the point of it; the Lifetime finishes are the ones to pick if you want the look held constant across a row of front doors.
19) I need matching handlesets on a keyed door and an unkeyed door - what pairs with the Emtek 4421 Marietta approach?
The Emtek 4421 Marietta is keyed, entry function. For the openings that do not need a key, the Schlage Residential JE285 Barcelona with Seville lever is a non-keyed entry handleset, Grade 2, for 1-3/8 to 1-3/4 inch doors, and dummy handlesets include the Weslock 2815 Hillcrest with New Heaven lever and the Weslock 6695 Belmont with Impresa knob, both listed for 1-3/8 to 2 inch doors. Matching appearance across keyed and unkeyed doors means staying within one of those families rather than mixing brands.
How fast can I get the Emtek 4421-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4421-US15 come with a warranty?
Absolutely. The Emtek 4421-US15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4421-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4421-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!