Emtek 4401 Marietta Dummy Entrance Handleset - Brass Tubular

It's a dummy, so there is no latch and no key. The Marietta 4401 is a fixed trim set: the exterior grip and the interior knob or lever mount to the door and don't turn a latchbolt. Use it on an inactive leaf of a pair, a French door slab that's held by a flush bolt or roller catch, or a closet or pantry door where you only need something to pull on. If you need the door to latch or lock, you need an entry or passage handleset instead.

Handing matters as soon as a lever goes on the inside. A lever has to point toward the latch edge, so left hand and right hand are different parts, and the Marietta 4401 requires you to pick right hand or left hand when you order. If you're putting a knob on the interior instead, the knob itself is symmetrical, but the order still asks for a hand. Stand outside the door: if the hinges are on your left it's left hand, hinges on your right it's right hand.

No, it ships as a complete set with the interior trim included, but you have to choose which knob or lever you want when you order. Any Emtek brass knob or lever can go on the inside, and the choices run from plain levers like Stuttgart, Athena and Geneva through knurled and faceted bar styles such as L-Square Knurled and T-Bar Faceted, traditional knobs like Providence and Waverly, and crystal knobs including Windsor and Georgetown. The exterior grip and the interior trim arrive together, so nothing else needs ordering to complete the door.

Dummy handlesets are a narrower field than entry sets. Alongside the Emtek Marietta 4401, ZenSupply carries the Weslock 6695 Belmont dummy handleset with Impresa knob and the Weslock 2815 Hillcrest dummy handleset with New Heaven lever, both of which cover 1-3/8 inch to 2 inch doors, so they reach thicker slabs than the Marietta's 1-3/8 to 1-3/4 inch range. The Emtek route is the one to take if you want to pick the interior knob or lever independently of the grip, since the Weslock sets come paired with a specified trim.

A dummy set won't lock, so you need a keyed entry handleset on that opening. Among the entry handlesets ZenSupply stocks that share the Marietta's 1-3/8 inch to 1-3/4 inch door range, the Schlage F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2, and the Pamex FS7P31 Lexington single cylinder handleset is a solid brass entry set. For a non-keyed but functioning latch, the Schlage JE285 Barcelona handleset with Seville lever is a Grade 2 non-keyed entry. Common practice is to hang the keyed entry set on the active door and the dummy Marietta on the inactive leaf when you want the pair to look alike.

The Emtek 4401 Marietta covers doors 1-3/8 inch to 1-3/4 inch, so a 2 inch door is outside its range. The Weslock 2815 Hillcrest dummy handleset with New Heaven lever and the Weslock 6695 Belmont dummy handleset with Impresa knob both list a 1-3/8 inch to 2 inch door thickness range, which takes in a full 2 inch slab. For a keyed opening on a thick door, the Weslock 1411 Traditionale Colonial single cylinder handleset with Eleganti knob covers 1-3/4 inch to 2-1/4 inch.

The Emtek 4401 Marietta is a dummy handleset, meaning it is non-keyed and does not latch. The Weslock 2815 Hillcrest is also a dummy handleset, paired with a New Heaven lever, and the Weslock 6695 Belmont is a dummy handleset with an Impresa knob. Both Weslock dummy handlesets fit doors 1-3/8 inch to 2 inch thick, while the Marietta 4401 fits 1-3/8 inch to 1-3/4 inch. All three give you a full handleset appearance on a door leaf that does not need to lock, such as an inactive door in a pair or a fixed french door panel.

The Emtek 4401 Marietta is a dummy handleset and is non-keyed, so it will not secure an opening. For a keyed exterior door, the Schlage Residential F60 Addison is a single cylinder keyed entry handleset with an Accent lever, Grade 2, fitting doors 1-3/8 inch to 1-3/4 inch - the same thickness range the Marietta covers. The Kwikset 687 Amador single cylinder handleset with SmartKey is a Grade 3 keyed entry unit for 1-3/4 inch doors. The Pamex FS7P31 Lexington is a single cylinder handleset for 1-3/8 inch to 1-3/4 inch doors. Any of these replaces a dummy on a door that has to be locked.

They are not the same. The Emtek 4401 Marietta is a dummy - it is surface mounted with no door prep required and has no latch or bolt, so the door leaf it goes on does not move with the handle. The Schlage Residential JE285 Barcelona with Seville lever is a non-keyed handleset in the entrance function, Grade 2, for doors 1-3/8 inch to 1-3/4 inch, so it operates a latch even though it takes no key. If the door needs to latch closed but never lock, the JE285 is the one; if the leaf is fixed, the 4401 dummy is.

Tubular, not mortise. That matters because a mortise handleset requires a deep pocket routed into the edge of the door, while the Marietta 4401 is a surface mounted dummy that needs no door prep at all. If you're converting a door that already has a mortise pocket in it, this set will cover the face but the pocket stays open in the edge.

5-1/2 inches center to center on the grip. That's the number to check if you're replacing an existing surface-mounted dummy handleset and want the new one to cover or reuse the same fastener locations. On a fresh door there's nothing to match, since the set surface mounts with no door prep.

Nine finishes are offered: Polished Nickel (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4) and Oil Rubbed Bronze (US10B). Unlacquered brass and oil rubbed bronze are living finishes that darken and patina with handling, so if you're matching a fleet of doors and want them all to stay identical, the lifetime polished brass or a plated finish like satin nickel holds its appearance instead. There's also a split finish option if you want the exterior grip in one finish and the interior trim in another.

The Emtek 4401 Marietta is brass with a tubular lock type in a dummy function. On the keyed side, Deltana builds several solid brass entry handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston are all entry-function solid brass handlesets. The Deltana 810871 Montego is another handleset in that family and fits doors 1-3/8 inch to 2 inch. These give you the same solid brass construction with a working entry lock rather than a fixed dummy trim.

Those are a different class of product. The Emtek 4401 Marietta is non-electronic and dummy function, with surface mount trim and no door prep. The Yale Real Living BYRD226CBARX Assure Lock pairs a Wi-Fi and Bluetooth touchscreen deadbolt with a Ridgefield handleset and fits 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente combines a handleset and Halifax lever with a SmartCode keypad electronic deadbolt on a 1-3/4 inch door. Both require a bored deadbolt prep and power at the door, and both are keyed or coded openings rather than fixed trim.

The Emtek 4401 Marietta is classified for residential use. For facility work where a graded product is required, the Schlage Residential F60 Addison keyed entry handleset with Accent lever is Grade 2, the Schlage JE285 Barcelona non-keyed handleset with Seville lever is Grade 2, and the Master Lock HDLB Series HDLBA0615/4D single cylinder deadbolt handleset is Grade 2. On the Grade 3 side, the Kwikset 687 Belleview single cylinder handleset with SmartKey is Grade 3.

The Emtek 4401 Marietta is a tubular handleset with surface mount trim that needs no door prep, in a dummy function, and fits 1-3/8 inch to 1-3/4 inch doors. The Baldwin Estates 6542 Tremont is mortise entry trim, offered as single cylinder or double cylinder, and lists a 1-3/4 inch door thickness. Mortise trim goes onto a door with a mortise lock body pocket already cut into the edge, so it is not a drop-in for a surface mounted dummy - the two prep the door very differently.

The Emtek 4401 Marietta is sold as a complete set and can be ordered with any brass knob or lever for the inside trim. Several peers ship as a fixed pairing instead: the Baldwin Wesley handleset comes matched with either an Alcott knob or a Carnaby knob, both entrance function, and the Weslock 2810 Hillcrest single cylinder handleset comes with a Hudson knob for 1-3/8 inch to 2 inch doors. With the Baldwin and Weslock sets the interior trim is decided by the part number; with the Marietta you choose the inside knob or lever separately.

Brass, both the substrate and the material, which is why it carries brass finishes like US3, US3NL and US4 rather than only painted or plated coatings. It's part of Emtek's Brass collection in the American Classic style. Note it's rated residential rather than commercial, so it's suited to homes, multi-family unit doors and light traffic interiors rather than a high-cycle commercial opening.

No wiring, no batteries, no electronics. It's a purely mechanical brass dummy set, so there's nothing to fail when the power drops and nothing to program. If you're after a keypad or app-controlled opening instead, the Yale Assure Lock Wi-Fi touchscreen deadbolt with Ridgefield handleset and the Kwikset 815 San Clemente handleset with SmartCode keypad deadbolt are the electronic handleset routes, both rated for 1-3/4 inch doors.

Not as a direct swap. The Emtek 4401 Marietta is a dummy handleset that mounts to the surface and operates nothing. The Schlage Residential JI18/19 with Torino lever is an interconnected passage lock with a keyed deadbolt, Grade 2, for 1-3/8 inch to 1-3/4 inch doors, and it uses a bore pattern with both a latch and a deadbolt tied together. A door prepped for that pattern already has holes the dummy will not fill or use, so plan on a keyed handleset in the same thickness range instead.

Handing on the Emtek 4401 Marietta is driven by the inside trim - handing is required if a lever is used on the inside. That is why the Marietta asks for right hand or left hand at order time. Fixed knob pairings such as the Baldwin Wesley handleset with Alcott knob or the Weslock 6695 Belmont dummy handleset with Impresa knob use a knob on the interior, which is symmetrical. Lever-trim sets like the Weslock 2815 Hillcrest with New Heaven lever put you back in the same position of needing the door's hand.

The Emtek 4401 Marietta is non-keyed in the dummy function, which suits a fixed leaf rather than a working front door. For a key-free door that still secures, the Yale Real Living BYRD256 CBARX Assure key free touchscreen deadbolt comes with a Ridgefield passage handleset and trim and fits 1-3/4 inch to 2-1/4 inch doors, and the BYRD256CBARX Assure Lock 2 key-free touchscreen deadbolt with Wi-Fi and Ridgefield handleset covers 1-3/8 inch to 2-1/4 inch. The Yale BYRD226NRRX is a standalone touchscreen deadbolt with Ridgefield handleset for doors 1-3/4 inch to 2-1/4 inch if you do not want the unit on a network.

The Emtek 4401 Marietta is non-keyed, so there is no cylinder to rekey. Kwikset offers SmartKey on its 687 handlesets: the 687AMD Amador single cylinder keyed entry with SmartKey and the 687AMD SMC version with an SC1 keyway SmartKey cylinder are both Grade 3 for 1-3/4 inch doors, exterior only, and the 687BW Belleview is the same arrangement in a different escutcheon shape. SmartKey lets a property manager rekey the cylinder at the door rather than pulling and pinning it.