Emtek 451112 Remington Entranc...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$783.00
$613.40
Emtek Emtek 451112 Remington Entrance Handleset - Sandcast Bronze Tubular - Single Cylinder EMTEK-451112

Emtek 451112 Remington Entrance Handleset - Sandcast Bronze Tubular - Single Cylinder

(1 review) Write a Review

Model: 451112-FB
From the Sandcast Bronze Collection
$783.00
$613.40
Selected Finish is
Selected Knob or Lever Style for Inside Trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is
  • Emtek Emtek 443 Interconnect Device EMTEK-443

In Stock (leaves warehouse same day if ordered before 3pm ET)

$783.00
$613.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 451112 Remington Entrance Handleset - Sandcast Bronze Tubular - Single Cylinder

  • Can be ordered with any Sandcast Bronze Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside or if Interconnect device is specified

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Sandcast Bronze
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Remington
Theme:
Rustic Living
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
451112
(CTC) Center-to-Center:
5-1/2"
Product Function:
Entry
Product Style:
Sandcast Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 451112-FB – Frequently Asked Questions

1) Will the Emtek 451112 Remington handleset fit my existing door prep?
The Remington entrance handleset uses a standard 2-1/8 inch cross bore with 5-1/2 inch center-to-center spacing between the deadbolt and the knob or lever bore. If your door is already prepped for a common residential handleset at 5-1/2 inch CTC, it drops in. Door thickness range is 1-3/8 to 2 inches, so it covers everything from an older interior slab up to a heavy 2 inch entry door.
2) Do I have to specify handing on the Emtek Remington handleset?
Handing is required, left or right. That is true generally on the Remington sandcast bronze handleset, and it becomes unavoidable if you order a lever for the inside trim or add the interconnect device. Stand outside the door: if the hinges are on your right, it's right hand. Get it wrong with a lever and the lever points the wrong way.
3) What backset do I need for the Emtek 451112, and can I get 2-3/4 inch?
Both backsets are offered. The latch ships 2-3/8 inch as standard, and 2-3/4 inch has to be called out on the order. Measure from the door edge to the center of the bore before you commit; those are the two usual residential backsets and a 2-3/4 inch door bored for a wider stile will not take the standard latch.
4) Can I key the Emtek Remington handleset into my existing Schlage or Weiser keys?
Schlage C is the standard keyway on the Remington handleset, so it drops into a Schlage-keyed property. Weiser WR5 is also available at no upcharge for the cylinder substitution and can be keyed into an existing Weiser system. Keyed alike and keyed different are both offered, and you can supply a key code on the order if you're matching a building master.
5) What comes in the box with the Emtek 451112 handleset, and what else do I have to order?
It's sold as a complete set with the latch and strike plate included. What you still have to choose is the inside trim: a knob or lever is a required selection, not an extra. Twenty-five sandcast bronze styles are offered, ten levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma) and fifteen knobs including Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. You also pick handing, backset and keying at the same time.
6) Is the Emtek 451112 a mortise handleset or a tubular one?
Tubular. The Remington 451112 bores into the door with a standard 2-1/8 inch cross bore, so it goes into ordinary residential prep and does not need a mortise pocket routed into the door edge. If your existing door has a mortise box in the edge, this is the wrong body type. Emtek's brass mortise handlesets are the alternative in that case.
7) My door is 2 inches thick. Which handlesets will actually fit?
The Emtek 451112 Remington covers 1-3/8 to 2 inches, so a full 2 inch door is at the top of its range and works. Most competing residential handlesets stop short of that: the Schlage Residential F60 Addison and the Pamex FS7P31 Lexington both top out at 1-3/4 inches. If you need to go past 2 inches, the Weslock 1411 Traditionale Colonial is rated 1-3/4 to 2-1/4 inches.
8) Which handlesets look like a substitute for the Emtek 451112 Remington but will not lock the door?
The Emtek 451112 Remington is an entry function set, keyed single cylinder. Two units in the same handleset shape do not do that job: the Weslock 6695 Belmont handleset with Impresa knob and the Weslock 2815 Hillcrest handleset with New Heaven lever are both dummy function, meaning fixed trim with no latch, normally used on the inactive leaf of a pair. The Schlage Residential JE285 Barcelona handleset with Seville lever is non-keyed entry function. All three share the 1-3/8 inch and up door range family but none of them takes a cylinder.
9) What is the closest cross-brand equivalent to the Emtek 451112 Remington entrance handleset for a 1-3/8 inch door?
The Emtek 451112 Remington is a single cylinder entry handleset with a tubular lock and a door thickness range of 1-3/8 inch to 2 inch. The Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers the same 1-3/8 inch to 2 inch door thickness range, and the Deltana 810871 Montego handleset also lists 1-3/8 inch to 2 inch. The Pamex FS7P31 Lexington single cylinder handleset is an entry function unit but its range stops at 1-3/4 inch, so on a door under 1-3/4 inch all four work and only the first three carry you out to a 2 inch door.
10) What single cylinder handleset should I use on a 2-1/4 inch thick door instead of the Emtek Remington 451112?
The Emtek 451112 Remington tops out at a 2 inch door. For a thicker slab, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder keyed entry unit rated for 1-3/4 inch to 2-1/4 inch doors. On the electronic side, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch. Both start at 1-3/4 inch, so neither drops back onto a 1-3/8 inch door the way the Remington does.
11) Which entrance handleset carries an ANSI grade if the Emtek Remington 451112 is being specified for a facility with a grade requirement?
The Emtek 451112 Remington is a residential-duty sandcast bronze handleset. Where a written grade is part of the spec, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2 on a 1-3/8 inch to 1-3/4 inch door, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2. The Kwikset 687AMD Amador single cylinder handleset is Grade 3 and fits a 1-3/4 inch door.
12) The Emtek Remington 451112 is a tubular set. What is the mortise alternative for the same entry opening?
The Emtek 451112 Remington uses a tubular lock with a 2-1/8 inch cross bore and a 5-1/2 inch center-to-center door prep. If the door is prepped for a mortise case instead, the Baldwin Estates 6542 Tremont single cylinder entry mortise trim is the entrance-function counterpart for a 1-3/4 inch door, and the Baldwin Estates 6542 Tremont double cylinder version covers the same 1-3/4 inch door where the inside also needs to be keyed. Mortise trim is not interchangeable with a bored 2-1/8 inch prep, so the door has to be cut for it.
13) Single cylinder or double cylinder for a front door with glass next to it?
The 451112 Remington is the single cylinder version: key outside, thumbturn inside. That's the normal choice and the one most residential codes want, since the inside always releases by hand. If there's glass within reach of the inside turn, a double cylinder (key both sides) is the usual answer, but check your local code first because keyed egress is restricted in many jurisdictions.
14) What finishes does the Emtek Remington sandcast bronze handleset come in?
Three: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). All three are available with either the standard Schlage keyway or the Weiser WR5 cylinder. Because these are sandcast bronze, the finish is on solid cast metal rather than plated, and each casting varies slightly, which is the point of the look. If you want the exterior and interior trim in different finishes, split finish can be specified on the order.
15) What is the Emtek 443 interconnect device and do I need it?
It's an optional add-on that ties the deadbolt to the inside lever or knob so one motion retracts both on the way out. Useful for rental and multi-family openings where a single-motion exit is wanted. Two things to know: it forces handing to be specified, and it is not available on double cylinder or EMPowered configurations. On the standard single cylinder 451112 it's a straight option.
16) Is the Emtek Remington handleset rated for a commercial entry, or is it residential?
It's a residential entry set. For a leased commercial opening or a high-traffic institutional door, a graded product is the better fit: ZenSupply carries the Schlage Residential F60 Addison as a Grade 2 keyed entry handleset, and the Master Lock HDLB Series single cylinder deadbolt handleset is also Grade 2. The Remington is the choice when the look of solid sandcast bronze is what's driving the decision.
17) I'm doing several doors in a building. Can I match the Emtek Remington across all of them on one key?
Keyed alike is offered at no charge across the order, and you can key to an existing code if the property is already on a Schlage C or Weiser WR5 system. Where a door doesn't need a handleset, the same sandcast bronze knob and lever styles that go on the inside of the Remington also appear across Emtek's Sandcast Bronze collection, so the finish and the trim shape carry through the building.
18) I want the same exterior handleset look but with a keypad instead of a key. What replaces the Emtek Remington 451112?
The Emtek 451112 Remington is a keyed, non-electronic single cylinder set. For a keypad opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior trim with a contemporary SmartCode keypad electronic deadbolt on a 1-3/4 inch door. The Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth with the Ridgefield handleset across 1-3/4 inch to 2-1/4 inch, and the BYRD256 CBARX is a key free touchscreen deadbolt with a Ridgefield passage handleset, meaning the handleset half does not latch on its own.
19) What is a simpler exterior-only handleset alternative to the Emtek Remington 451112, which comes as a complete set?
The Emtek 451112 Remington is sold as a complete set including latch and strike plate, with the inside knob or lever chosen separately. If the interior trim is staying and only the outside plate is being replaced, the Kwikset 687AMD SMT Amador and Kwikset 687BW SMT Belleview are both single cylinder keyed entry handlesets supplied exterior only, Grade 3, for a 1-3/4 inch door. The Kwikset 687AMD SMC is the same Amador in an SC1 keyway with SmartKey.
20) The Emtek Remington 451112 can take an interconnect device. What else gives a keyed deadbolt interconnected with the lever?
The Emtek 451112 Remington accepts the Emtek 443 interconnect device as an option, and handing must be specified when an interconnect is used. As a factory-built alternative, the Schlage Residential JI18/19 interconnected passage lock pairs a keyed deadbolt with a Torino lever in satin stainless steel, Grade 2, on a 1-3/8 inch to 1-3/4 inch door. Its lever half is passage function, so the deadbolt does the locking.
21) What other solid brass entrance handlesets compare to the Emtek Remington 451112 in sandcast bronze?
The Emtek 451112 Remington is a bronze handleset in the Sandcast Bronze collection, with the inside knob or lever specified from the matching sandcast range. In solid brass, Deltana offers three entry-function handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston. All three are entry function like the Remington, and the Deltana Montego 810871 is the fourth in that family, listed for 1-3/8 inch to 2 inch doors.
22) The Emtek Remington 451112 lets me pick the interior knob or lever. Which other handlesets are sold as a fixed handle and knob pairing?
The Emtek 451112 Remington is ordered with a separately selected inside trim, choosing from sandcast levers such as Durango, Teton and Yuma or knobs such as Butte, Winchester and Windsor. Several peers ship as a set pairing: the Baldwin Wesley handleset comes matched with either the Alcott knob or the Carnaby knob, both entrance function, and the Weslock 2810 Hillcrest arrives with the Hudson knob. Where a fleet has to match trim across many doors, the selectable inside trim is what lets the Remington follow whatever is already hung.
How fast can I get the Emtek 451112-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 451112-FB come with a warranty?
Absolutely. The Emtek 451112-FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 451112-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 451112-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    Beautiful

    Posted by Bill on Jul 11th 2024

    This is my 2nd set and I love the quality and strength of the handle. The color goes well with the color of my door.

!