Emtek 455828 Logan Grip by Grip Entrance Handleset - Sandcast Bronze Tubular - Dummy
- Handing Not Required
- Standard door thickness of 1-3/4”. Specify if thicker.
- Grip by Grip is a custom function made to order and requires an additional 2-3 day lead time.
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Grip by Grip Entrance Handlesets
- Collection:
- Sandcast Bronze
- Product Type:
- Grip by Grip Entrance Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Lock Type:
- Tubular
- Keyed:
- No
- Lock Function:
- Dummy
- Series:
- Logan
- Theme:
- Rustic Living
- Electronic:
- No
- Handle Type:
- Handleset
- MAP Policy:
- Yes
- Product Model:
- 455828
- (CTC) Center-to-Center:
- 5-1/2"
- Product Function:
- Dummy
- Product Style:
- Sandcast Bronze
- Product Material:
- Bronze
- Product Category:
- Mechanical Locks
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 455828-FB – Frequently Asked Questions
1) Does the Emtek 455828 Logan handleset actually latch, or is it just a pull?
It's a dummy function, so there is no latch, no bolt and no keyed cylinder. The Logan 455828 is a grip on the outside and a grip on the inside, both fixed, used as pulls on an inactive door leaf or a door that is held closed some other way. If you need the door to latch or lock, you need a keyed entrance or passage handleset instead.
2) What door prep does the Logan grip by grip handleset need?
None. It's surface mount, so there's no bore and no mortise pocket to cut. That makes it a practical choice on a door you don't want to drill, or on a slab where existing prep doesn't line up. The grips mount 5-1/2 inches center to center, which is the only layout you have to lay out on the door.
3) Will the Emtek 455828 work on a 1-3/8 inch door?
Yes. The Logan grip by grip fits doors from 1-3/8 to 1-3/4 inches as supplied, with 1-3/4 inches being the standard build. Thicker than 1-3/4 inches and you have to call it out on the order using the Door Thickness field.
4) Can I use the Emtek 455828 on the inactive leaf of a double door?
That's exactly what a dummy grip by grip is for. With no latch or bolt, the 455828 gives you a matching pull on both faces of the inactive leaf while a flush bolt or the active leaf's lock does the holding. Order the active leaf with a keyed Logan handleset in the same finish for a matched pair.
5) Do I need to order the Logan handleset in a left or right hand?
No handing to specify. Because both sides are fixed grips with no lever or latch, the 455828 installs on a door swinging either direction.
6) What finishes does the Emtek Logan sandcast bronze handleset come in?
Three: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). All three are part of Emtek's Sandcast Bronze collection, so they match other Sandcast Bronze trim in the same finish code. If you want a different finish inside than out, there's an optional split finish note on the order.
7) Is grip by grip a stock item or made to order?
Made to order. Grip by grip is a custom Emtek function and adds 2 to 3 days of build time on top of normal handling, so plan the trim install around that rather than treating it as an off-the-shelf handleset.
8) Is the Logan 455828 handleset suitable for a commercial opening?
Emtek lists it as residential. It's a sandcast bronze decorative handleset aimed at homes and rustic-style interiors, not an ANSI-graded commercial lockset. For an apartment community's leasing office or any opening on a code path, go with a graded commercial lockset instead.
9) Is the Emtek 455828 an electronic or smart handleset?
No electronics. It's a purely mechanical, non-keyed dummy trim, so there's no keypad, no motor and no wiring to run.
How fast can I get the Emtek 455828-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 455828-FB come with a warranty?
Absolutely. The Emtek 455828-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 455828-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 455828-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.