Emtek 475222 Octagon Grip by G...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,226.00
$980.80
Emtek Emtek 475222 Octagon Grip by Grip Entrance Handleset - Lost Wax Cast Bronze Tubular - Dummy EMTEK-475222

Emtek 475222 Octagon Grip by Grip Entrance Handleset - Lost Wax Cast Bronze Tubular - Dummy

(No reviews yet) Write a Review

Model: 475222-MB
From the Tuscany Bronze Collection
$1,226.00
$980.80
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,226.00
$980.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 475222 Octagon Grip by Grip Entrance Handleset - Lost Wax Cast Bronze Tubular - Dummy

  • Handing Not Required
  • Standard door thickness of 1-3/4”. Specify if thicker.
  • Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required.
  • Grip by Grip is a custom function made to order and requires an additional 2-3 day lead time.

Weiser® (WR5) Keyway

  • Specify by adding “W” to the beginning of product code.
  • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system

 

Specifications:

  • Door Thickness: 1-3/8" to 1-3/4"
  • Mount: Surface Mount (no door prep required)
  • Material: Brass

Product Specs

Subcategory:
Grip by Grip Entrance Handlesets
Collection:
Tuscany Bronze
Product Type:
Grip by Grip Entrance Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Keyed Function:
Non-Keyed
Lock Type:
Tubular
Keyed:
No
Lock Function:
Dummy
Series:
Octagon
Theme:
Tuscany
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
475222
(CTC) Center-to-Center:
5-1/2"
Product Function:
Dummy
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 475222-MB – Frequently Asked Questions

1) Is the Emtek 475222 Octagon handleset a working lock or just a pull?
It's a dummy function, so there is no latch, no cylinder and no key. Both sides are fixed grips used as pulls only, which is why it's a grip by grip set rather than grip by lever or knob. Use it on an inactive leaf of a double door, a French door slab that's held by a flush bolt or ball catch, or a panel where the latching is handled by other hardware.
2) Does the 475222 Octagon dummy handleset need any door prep or boring?
No boring needed. It's surface mounted, so it fastens to the face of the door with no cross bore or latch prep. That makes it the easy choice for a slab that was never drilled, or for covering a leaf you don't want to cut into. The description does cite a standard latch for a 2-3/8 inch backset with 2-3/4 inch available, but that applies to the latching versions of the family, not to the dummy.
3) What door thickness does the Emtek Octagon grip by grip handleset fit?
Standard build is for a 1-3/4 inch door, with the stated range 1-3/8 to 1-3/4 inches. 1-3/4 inch is the usual exterior and commercial slab and 1-3/8 inch the common older interior door. If your door is thicker than 1-3/4, that has to be called out on the order; there's a Door Thickness field for it.
4) How far apart are the mounting holes on the Emtek 475222 handleset?
Center to center is 5-1/2 inches. That's the figure to check against an existing handleset's holes or against the backplate you're replacing, since a surface mounted dummy has no latch bore to reference and the fastener spacing is what decides whether it lands on existing holes or a fresh pattern.
5) Do I have to specify handing for the Octagon grip by grip dummy set?
Handing isn't required. Because both sides are fixed grips with no latch or lever action, the same set works on a left hand or right hand door. That helps if you're buying for several openings in a house and don't want to track swings.
6) What finishes does the Emtek Octagon 475222 handleset come in, and can I mix inside and out?
Two finishes: Flat Black Bronze (FB) and Medium Bronze (MB). It's part of the Tuscany Bronze collection in lost wax cast bronze. A split finish can be requested when ordering if you want one finish on the exterior face and another on the interior, which is common when the entry hardware has to match dark exterior trim but a lighter interior palette.
7) Can the Emtek 475222 be keyed into my existing Weiser system?
Not this one. The 475222 is a dummy with no cylinder at all, so there's nothing to key. The Weiser (WR5) keyway substitution, specified by adding a W to the front of the product code with no cylinder upcharge, applies to the keyed entry versions of the Octagon handleset rather than the dummy.
8) Is this Emtek handleset suitable for a commercial building or apartment corridor?
It's classified residential. Lost wax cast bronze grips suit houses, custom homes and residential entries; for corridor or high traffic commercial openings you want a graded commercial lockset instead. Property managers replacing hardware on single family or luxury multi-family front doors are the fit here.
9) Is the grip by grip Emtek Octagon set a stock item or made to order?
Grip by grip is a custom function built to order, so it carries additional production time beyond the standard grip by lever or grip by knob configurations. Worth knowing if you're scheduling a trim out date around it.
10) Is the Emtek Octagon handleset mortise or tubular, and does that change the prep?
Tubular, not mortise. A tubular set works off a bored hole rather than a pocket cut into the door edge, which is a far lighter prep than a mortise lock body. In the dummy configuration there's no bore either since it surface mounts.
How fast can I get the Emtek 475222-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 475222-MB come with a warranty?
Absolutely. The Emtek 475222-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 475222-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 475222-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!