Emtek 5328 Annapolis Two-Point Lockset - Brass Tubular - Double Cylinder
- Can be ordered with any Key in Knob or Lever Style
- Sold as complete set. Includes Latch and Strike Plates
- Standard Door Thickness: 1-1/4" to 2"
- Inside Passage Half Spindle
- 1" Wood Screws
- Threaded Tubes and Machine Screws
- Supplied upon request for Hollow-Core Doors
- Full-Lip Strike Plate
- Handing Required for Leversets
- Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required
- Any Key In Knob/Lever style options listed on this page can be used with Modern Rectangular trim style (some finish limitations)
Weiser® (WR5) Keyway
- Specify by adding “W” to the beginning of product code.
- No upcharge for cylinder substitution (Standard is Schlage C Keyway)
- Can be keyed into existing Weiser® system
Specifications:
- Keyway: Schlage C (standard)
- Material: Brass
- Keys Included: 2
Manufacturer Resources
Product Specs
- Subcategory:
- Two-Point Locksets
- Collection:
- Brass
- Product Type:
- Sideplate Locksets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Keyed Function:
- Double Cylinder
- Commercial/Residential:
- Residential
- Lock Type:
- Tubular
- Keyed:
- Yes
- Lock Function:
- Entry
- Series:
- Annapolis
- Theme:
- American Classic
- Electronic:
- No
- MAP Policy:
- Yes
- Product Model:
- 5328
- Product Function:
- Double Cylinder
- Product Style:
- American Classic
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek EMTEK 5328-W-US15 – Frequently Asked Questions
1) Will the Emtek 5328 Annapolis two-point lockset fit a 1-3/4 inch door?
Yes. The 5328 Annapolis set covers doors from 1-1/4 inch up to 2 inches thick as standard, so 1-3/4 inch commercial-style slabs and 1-3/8 inch older interior doors are both inside the range. It ships with threaded tubes and machine screws plus 1 inch wood screws, and there is a door thickness field on the order so you can call out your actual slab.
2) What backset do I need for the Emtek Annapolis 5328, and can I get 2-3/4 inch?
The standard latch is a 2-3/8 inch backset. A 2-3/4 inch backset is available and has to be specified on the order, so measure from the door edge to the center of the bore before you buy. Those are the two backsets bored into virtually every residential door, so an existing prep will match one of them.
3) Does the double cylinder Annapolis lockset need a key on the inside too?
Yes, and that is the point of the double cylinder version. Both faces take a key, so there is no thumbturn on the interior. It is the setup people choose for a door with glass beside or in it, where a thumbturn could be reached from outside. If you want a keyed exterior and a thumbturn inside, you want the single cylinder version instead, not this one.
4) Can the Emtek 5328 be keyed to match my existing Weiser locks?
Yes. The Annapolis 5328 comes with a Schlage C keyway as standard, and a Weiser WR5 keyway can be substituted at no upcharge by adding a W to the front of the product code. On WR5 it can be keyed into an existing Weiser system. Keyed alike and keyed different are both offered, and there is a keying-to-code field if you have a bitting to match.
5) Do I have to specify handing on the Emtek Annapolis two-point lockset?
Handing is required if you pick a lever. Knobs are non-handed, so Egg, Providence, Rope and Waverly knobs do not need it. Cortina and Rope levers do. Stand outside the door: if the hinges are on your right it is a right-hand door.
6) What comes in the box with the Emtek 5328 Annapolis lockset, or do I need to buy a deadbolt separately?
It is a complete two-point set, so the deadbolt and the keyed knob or lever both come on the one sideplate. No separate deadbolt to order. Latches and strike plates are included, with a full-lip strike, along with an inside passage half spindle, threaded tubes, machine screws and 1 inch wood screws.
7) What is the closest equivalent to the Emtek 5328 Annapolis double cylinder two-point lockset from another brand?
The Omnia D12036AC is the nearest match. It is a double cylinder deadbolt lever lockset in solid brass with a sideplate design, which is the same arrangement as the Annapolis 5328 - a keyed lever or knob and a deadbolt carried on a single sideplate, in brass, keyed on both sides. The practical difference for a locksmith is trim: the Emtek 5328 takes a Cortina Lever, Egg Knob, Providence Knob, Rope Knob, Rope Lever or Waverly Knob, while the Omnia is a lever lockset. If the opening needs a knob rather than a lever, the Emtek side is where the knob options sit.
8) I need a two-point brass lockset but the door has an egress requirement and cannot take a key on the inside. What should I use instead?
Use a single cylinder version. The Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, so the interior side turns by thumbturn rather than by key. The Emtek 5328 Annapolis is a double cylinder set, keyed on both sides, which is what many jurisdictions restrict on a required egress door. Property managers replacing a glass-panel entry often start with double cylinder for the glass and then find the code officer wants a single cylinder - the D12036A is the same solid brass deadbolt-plus-lever format without the inside keyway.
9) Is the Omnia D12036PD a substitute for the Emtek 5328 Annapolis lockset?
No. The D12036PD is a double dummy - a solid brass dummy deadbolt lever set with plates, meaning it does not latch, does not lock and accepts no key. The Emtek 5328 Annapolis is a keyed entry lockset with a double cylinder function and a tubular latch, supplied as a complete set with latch and strike plates. The two look similar on the door because both are sideplate-style brass sets, which is exactly why the dummy gets ordered by mistake. Order the dummy only for a leaf that never opens under the lock, such as an inactive door or a closet face.
10) What knob and lever styles can I get on the Emtek 5328 Annapolis sideplate?
Seven trim choices ride on the Annapolis plate: Egg, Providence, Rope and Waverly knobs, Cortina and Rope levers, and the Modern key-in-knob/lever style called out in comments. Rope Knob and Rope Lever are not made in Satin Brass (US4), Polished Nickel (US14) or Flat Black (US19). The Modern rectangular trim style can also be paired with any of these key-in-knob or lever options, with some finish limits.
11) What finishes does the Emtek Annapolis 5328 come in, and can I mix inside and outside?
Ten finishes: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15) and Unlacquered Brass (US3NL). A split finish option is on the order form, so a bronze exterior with a nickel interior is doable. Unlacquered brass will patina; the Lifetime finishes will not.
12) What else can I buy instead of the Emtek 5328 if I want a single cylinder or a dummy sideplate set?
Within the same style of one-piece plate carrying a deadbolt and a lever, Omnia builds the D12036A as a single cylinder deadbolt lever lockset in solid brass, and the D12036AC as the double cylinder equivalent with a sideplate design. For an inactive leaf that needs no working hardware, the Omnia D12036PD is a double dummy version with plates on 5-1/2 inch center to center.
13) How is a two-point lockset different from buying a knob and a deadbolt separately?
A two-point set puts the deadbolt and the keyed knob or lever on one continuous sideplate, so the two bores are covered by a single piece of trim instead of two separate roses. It reads as one assembly on the door and the spacing between the bores is fixed by the plate, which is why the backset and thickness have to be right the first time. Separate knob-and-deadbolt gives you flexibility in bore spacing; the sideplate does not.
14) What is a simpler option for the inactive leaf of a pair of doors that only needs to match the working lockset?
The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center spacing. It has no cylinder and no latch - it is surface-applied trim that matches the look of the keyed set on the active leaf. The Emtek 5328 Annapolis is a keyed, latching entry set with a functioning deadbolt, so use it on the leaf that actually operates and the D12036PD where only the appearance has to carry across.
15) I am standardizing entry hardware across a building and need the same double cylinder function on every unit door. Which brands offer it?
Both the Emtek 5328 Annapolis and the Omnia D12036AC are double cylinder sets, so either will hold a consistent function across a run of doors. The deciding factor is usually keying and trim. The Emtek 5328 is a residential-rated brass set that ships with a Schlage C keyway as standard and can be ordered with a Weiser WR5 keyway by adding W to the product code, and it can be keyed alike across an order - which is what makes a fleet of doors work off one key. The Omnia D12036AC is a solid brass double cylinder deadbolt lever lockset. If the building is already on a Schlage C or Weiser system, the keyway substitution on the Emtek side is the detail that decides it.
16) How many keys ship with the Emtek Annapolis 5328, and can I order several keyed alike for a rental property?
Two keys come with the set. Keyed alike is one of the free keying options, so a landlord doing several units or a front and back door on the same house can put them all on one key. Keying to a specific code is also offered if you are matching an existing system.
How fast can I get the Emtek EMTEK 5328-W-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek EMTEK 5328-W-US15 come with a warranty?
Absolutely. The Emtek EMTEK 5328-W-US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek EMTEK 5328-W-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek EMTEK 5328-W-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.