Emtek 8580 Urban Modern Single Sided Deadbolt - Brass

Openings where only the inside face matters: a closet or storage door, a den or office door, an interior door on a vestibule, or the inactive leaf of a pair. Emtek describes the 8580 as being for interior installation and appearance, and since the outside face has no cylinder or collar, the exterior side is left blank. If you need to unlock the door from the outside with a key, you want a cylinder x thumbturn deadbolt instead, such as the Dexter DB1000 single cylinder or the Hager 3115.

Yes, if the prep is standard tubular. The 8580 uses a 2-1/8 inch cross bore and a 1 inch edge bore, which is the common residential deadbolt prep, and it is available for either a 2-3/8 inch or a 2-3/4 inch backset. Measure from the door edge to the center of the existing hole to decide which backset to order, since backset is a required selection.

It covers 1-3/8 to 2 inch doors, and it is built for 1-3/4 inches as standard. If your door falls outside that standard thickness, you have to call it out when ordering (there is a door thickness field for exactly that). A 1-3/8 inch interior door and a 1-3/4 inch door both work without a special part.

It is a residential product, and a tubular interior bolt at that. For a commercial opening or a rated door you want a graded deadbolt: the Accentra D111 and the Delaney LM Series are Grade 1 cylinder x thumbturn options, and the Hager 3215 is a Grade 2 single cylinder deadbolt with a 1 inch throw.

The Emtek 8580 Urban Modern deadbolt is a single sided, non-keyed tubular deadbolt operated by a thumbturn from inside only, with no cylinder or collar on the outside face. The closest counterpart in another brand is the Callan Model 205S, a one-sided half-bore deadbolt in Grade 3. The Arrow E60 is also non-keyed and works the same way from the inside, but it is a Grade 2 exit deadlock with a blank plate on the outside face rather than a half-bore one-sided body, so the outside of the door shows a blank plate instead of nothing at all.

The Emtek 8580 is non-keyed and operates by thumbturn from inside only, so it gives no outside key access. For a keyed outside cylinder with an inside thumbturn, the Hager 3115 is a Grade 2 cylinder x thumbturn deadbolt on the Schlage C keyway, which is the same keyway the 8580 body is cut for, and it covers doors 1-3/8 inch to 1-3/4 inch. The Dexter DB2000-SCT is another Grade 2 single cylinder option in the 1-3/8 inch to 1-3/4 inch range, and the Dexter DB1000-SCT moves up to Grade 1 with a 1-3/8 inch to 1-7/8 inch door range.

The Emtek 8580 Urban Modern deadbolt is classified for residential use and is a tubular, non-keyed single sided body. For an opening that has to meet an ANSI grade on the drawing, look at the Accentra D111, a Grade 1 single cylinder deadbolt with a 2-3/8 inch backset covering 1-3/8 inch to 1-3/4 inch doors, or the Design Hardware D1 Series, a Grade 1 extra heavy duty double cylinder deadbolt for 1-3/4 inch doors. The Falcon D111 is a Grade 1 heavy duty classroom-function deadbolt with an adjustable backset if the facility standardizes on classroom keying.

The Emtek 8580 is built around a standard 1-3/4 inch door and covers 1-3/8 inch to 2 inch thicknesses, so anything beyond 2 inches is outside its range. For thicker leaves, the Corbin Russwin DL3011 Grade 1 cylindrical deadlock covers 1-3/4 inch to 2-1/4 inch doors. It is a keyed cylinder x blank deadlock rather than a non-keyed single sided thumbturn unit, so the operation is different from the 8580.

Seven, all on a brass substrate: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). If you are matching other Emtek Urban Modern trim in a house, order the same US code. Unlacquered brass is a living finish and will patina with handling, so it will not stay matched to a lacquered piece.

The Callan Model 205S is a one sided half-bore deadbolt, Grade 3. It is the utility version of the same idea. The Emtek 8580 is the design-driven choice, a contemporary Urban Modern thumbturn in brass, when the inside face is visible and needs to match other trim.

No cylinder to buy, because the 8580 is non-keyed and comes with no cylinder or collar. What you do have to decide on the order is the backset, 2-3/8 or 2-3/4 inch, which is a required choice, plus the finish. Note the outside face of the door will be blank, so if the existing door has an old exterior collar or cylinder hole showing, plan for that.

They solve different problems. The Emtek 8580 is non-keyed and turns only from the inside thumbturn, so anyone reaching through a broken lite can throw it. A double cylinder deadbolt requires a key on both faces: the Deltana 7312KA2 is a Grade 3 double cylinder deadbolt covering 1-3/8 inch to 2 inch doors, matching the 1-3/8 inch to 2 inch range the 8580 body is built for, and the Callan Model 210S is a Grade 3 double cylinder option. Keep in mind that double cylinder hardware is restricted on egress doors in many jurisdictions, so confirm against your local code before specifying it.

Both are contemporary-styled deadbolts, but the function differs. The Emtek 8580 Urban Modern is single sided and non-keyed, with a thumbturn inside and no cylinder or collar outside, and it comes in seven finishes including Flat Black (US19), Polished Chrome (US26), and Unlacquered Brass (US3NL). The Baldwin Reserve Contemporary Square deadbolt and its round counterpart are double cylinder, meaning a key cylinder on both faces. If you want the Urban Modern look with a key outside, the 8580 is not that product; the Baldwin Estates 8011 Contemporary is a 1-5/8 inch double cylinder deadbolt in entrance function.

The Emtek 8580 uses a standard Urban Modern thumbturn and is a residential single sided unit. If ergonomic operation is the driver, the Cal-Royal LSD is a Grade 3 single cylinder deadbolt with an ADA ergonomic thumbturn covering 1-3/8 inch to 1-3/4 inch doors. Note that the LSD is cylinder x thumbturn, so it adds an outside key cylinder the 8580 does not have. The Cal-Royal ED500 is another Grade 3 cylinder x thumbturn option in the same 1-3/8 inch to 1-3/4 inch range with an adjustable backset.

The Emtek 8580 needs a 2-1/8 inch cross bore and a 1 inch edge bore at either a 2-3/8 inch or 2-3/4 inch backset, so it requires a standard drilled prep. Where you would rather not bore the door, the Codelocks CL200 is a light duty surface deadbolt with key override, and the Codelocks CL2200 is a medium duty electronic surface deadbolt in a brushed steel finish. Both mount to the door face instead of through a cross bore, and both add code or key operation that the non-keyed 8580 does not provide.