Emtek Classic Brass Knobsets w...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$190.00
$155.19
Emtek Emtek Classic Brass Knobsets with Designer Rosettes - Waverly Knob, Passage Set EMTEK-CLASSIC-DESIGNER-KNOBSETS-WAVERLY-PASSAGE

Emtek Classic Brass Knobsets with Designer Rosettes - Waverly Knob, Passage Set

(No reviews yet) Write a Review

Model: 8107.W.US15
From the Brass Collection
$190.00
$155.19
Selected Latch is
Selected Rosette is
Selected Finish is
Selected Backset is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$190.00
$155.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek Classic Brass Knobsets with Designer Rosettes - Waverly Knob, Passage Set

  • Can be ordered with any Brass rosette
  • Sold as complete set. Includes Latch and Strike Plate
  • 28 Degree Latch (included when CF Mechanism is selected)
  • Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required

* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy


 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

Product Specs

Subcategory:
Knobsets
Collection:
Brass
Product Type:
Knobsets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Handle Type:
Knob
Lock Type:
Tubular
Series:
Waverly
Theme:
American Classic
Electronic:
No
Keyed Function:
Non-Keyed
Keyed:
No
Lock Function:
Passage
MAP Policy:
Yes
Product Function:
Passage
Product Style:
Traditional
Product Material:
Brass
Product Category:
Mechanical Locks
Product Substrate:
Brass
Department:
Door Hardware

Emtek 8107.W.US15 – Frequently Asked Questions

1) Will the Emtek Waverly passage knob fit a standard 1-3/8 inch interior door with a 2-1/8 inch bore?
Yes. The Waverly passage knobset drops into a standard 2-1/8 inch cross bore and covers doors from 1-3/8 to 1-3/4 inches thick. The standard latch is set up for a 2-3/8 inch backset, which is the usual residential interior prep, and a 2-3/4 inch backset version is available if your existing bore is set further from the edge. Measure from the door edge to the center of the bore before you order.
2) Is the Emtek Waverly knob a locking knob or does it just latch?
Passage only. The Waverly passage set latches the door closed and turns freely from both sides, with no key and no thumbturn, so it is for halls, closets and any door that never needs to lock. If you need the door to lock from inside for a bed or bath, you want the privacy version instead, and for a keyed door you need an entry function.
3) What comes in the box with the Emtek Waverly passage knobset?
It ships as a complete set: both knobs, the rosettes you select, the latch and the strike plate. The latch faceplate can be had with a round or square corner so it matches the mortise already cut in your door edge. Nothing else is needed to hang it on an existing bored door.
4) Is the Emtek Waverly knob rated for commercial or apartment corridor use?
Residential. The Waverly is a brass tubular knobset built for houses and interior doors in residential settings. For a commercial corridor, a leased unit entry, or anything a facility spec calls out by grade, use a cylindrical lockset instead, such as the Schlage D10S Grade 1 passage or the Corbin Russwin CK4310 Grade 1 passage knob, which covers 1-3/8 to 2 inch doors.
5) What do I have to specify when ordering an Emtek Waverly passage knobset?
Four decisions: backset (2-3/8 or 2-3/4 inch, required), finish, rosette pattern, and latch type (standard, 28 degree rotation, or CF concealed fastener). Door thickness and a split finish request can be entered as text if you want different finishes on the two faces. Get the backset right off the existing bore, because that is the one choice that decides whether the latch reaches the strike.
6) Can I put an Emtek Waverly knob on a door that currently has a builder-grade knob?
In most cases yes, and without drilling. A standard builder knob sits in a 2-1/8 inch cross bore at a 2-3/8 or 2-3/4 inch backset, which is exactly what the Waverly passage set is prepped for on doors 1-3/8 to 1-3/4 inches thick. Check the old latch faceplate corner, round or square, and order the matching one so the existing edge mortise is covered.
7) The opening is a 2 inch thick door - which passage knob covers that thickness instead of the Waverly?
The Emtek Waverly passage knobset is specified for 1-3/8 to 1-3/4 inch doors. For thicker stock, the Corbin Russwin CK4310 is a Grade 1 passage/closet cylindrical lock with a Global knob rated 1-3/8 to 2 inches, and the Falcon X101 Grade 1 heavy duty passage knobset goes to 2-1/4 inches. The Lockey 3830 keyless combination knob lock with auto-locking passage function covers 1-3/16 to 2 inches if a code entry is wanted on that door.
8) What is the closest equivalent to the Emtek Waverly passage knobset from another decorative brand?
The Baldwin Estate 5011 Colonial passage knob with 5058 rose is the nearest decorative counterpart - same passage/hall/closet function, same knob-and-rose format. Baldwin also offers the Estate 5000 Baltimore knob with 5048 rose as a preconfigured passage lock with a 2-3/8 inch backset and full lip strike, which arrives set up rather than configured. The Emtek Waverly is a solid brass passage knobset with a choice of Lancaster, Ribbon and Reed, or Rope rosette and an adjustable 2-3/8 or 2-3/4 inch backset, so it is the one to pick when the rosette pattern has to match other doors.
9) The Waverly passage knob is going on a door in a commercial corridor - is there a graded passage knob to use instead?
The Emtek Waverly passage knobset is a residential brass set, so for a graded opening go to a cylindrical passage lock instead. The Schlage D10S passage latch is Grade 1 heavy duty with an Orbit knob, and the Falcon X101 is a Grade 1 heavy duty passage knobset that is fire rated and fits doors 1-3/8 to 2-1/4 inches. One step down, the Falcon W101 is Grade 2 medium duty, fire rated, with a 2-3/4 inch backset, and the Corbin Russwin CK4410 is a Grade 2 passage/closet lock for 1-3/8 to 1-3/4 inch doors.
10) I need the same Waverly look on a bedroom or bathroom door - what takes a privacy function instead of passage?
The Waverly set is passage only, so it is non-keyed and has no thumbturn. For a bed or bath door in a similar decorative brass style, the Baldwin Estate 5077 Bethpage privacy knob with R027 rose and the Baldwin Estate 5000 Baltimore knob with 5148 rose privacy lock, which comes with a 2-3/8 inch backset and full lip strike, both carry a privacy function. The Deltana 6112 St. Thomas knob is another privacy knob and covers doors 1-3/8 to 2 inches.
11) The door already has a keyed entry knob - can the Waverly passage set replace it?
No. The Waverly is a non-keyed passage set with no cylinder, so it will not lock. For a keyed opening in a decorative brass knob, the Deltana 3381 Egg knob entry and the Deltana 6171 Round knob entry both cover 1-3/8 to 2 inch doors, and the Deltana 6901 Portland knob entry covers 1-3/8 to 1-3/4 inch. On the builder side the Kwikset 400P Polo entry knob ships with a 6AL latch and RCS strike, and the Kwikset 400P-CP is Grade 3 for 1-3/8 to 1-3/4 inch doors.
12) The Waverly passage knob is going on a storeroom or utility door that has to stay locked - what should be used instead?
A passage set has no locking function at all, so it is the wrong function for a storeroom. The Sargent 6G04 is a Grade 2 standard duty storeroom/closet knob lock with a single cylinder from the 6 Line Series, and the Sargent 8XG04 is the Grade 1 heavy duty equivalent from the 8X Line Series with a 2-3/4 inch backset. The BEST 8K Series is a Grade 1 heavy duty entrance function knob lock if the door needs to be unlocked by key and left free.
13) What is the CF mechanism option on Emtek knobsets and should I pick it?
CF means concealed fastener: the rosettes mount with no exposed screws, so you see a clean brass rose instead of two screw heads. Choosing CF also brings the 28 degree rotation latch. If you don't care about visible screws, the standard latch build is the simpler order. On a visible main-floor door where the hardware is part of the look, CF is the one people pick.
14) Which rosette styles can I get with the Emtek Waverly knob?
Three designer brass rosettes pair with the Waverly knob: Lancaster, Ribbon and Reed, and Rope. All three are solid brass and all three take any of the seven finishes, so you can run one rosette pattern through a whole floor and still match trim styles room to room.
15) Can I match Emtek Waverly knobs to the finishes already on my other doors?
Seven finishes are offered: French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15) and Unlacquered Brass (US3NL). Note that Unlacquered Brass is a living finish and will patina with handling, while the Lifetime Polished Brass holds its shine. If you are matching hinges and other trim, order by the US number rather than the name.
16) Does a passage knob need handing, and does the Emtek Waverly work on a left or right hand door?
No handing to specify. The Waverly passage set turns freely from both sides with a non-handed tubular latch, so it works on a left or right hand door either swing. The only orientation choice is which side the rosette screws land on with the standard latch build, and the CF option removes visible screws altogether.
17) What is a simpler passage knob than the Emtek Waverly for a closet or hall door that does not need decorative brass?
The Kwikset 200P Polo passage knob ships with a 6AL latch and RCS round corner strike, and the 200P-CP version comes with a round corner adjustable latch and round corner strike. The Pamex FTF Baron knob is a Grade 3 passage lockset for 1-3/8 to 1-3/4 inch doors, and the Dexter C2000 passage ball knob is Grade 2, non-clutching, for the same thickness range. The Emtek Waverly is solid brass in seven finishes including Oil Rubbed Bronze US10B, Satin Nickel US15, and Unlacquered Brass US3NL, so it is the choice when the hall door has to match the rest of the trim.
18) Which passage knob should be specified when the interior doors need a matching keyed entry from the same family, unlike the Waverly?
The Emtek Waverly is a non-keyed passage set. When one family has to cover both passage and keyed openings, the Arrow MK Series MK01 and RK Series RK01 are Grade 2 passage cylindrical knob locks for 1-3/8 to 1-3/4 inch doors within keyed series lines, and the Corbin Russwin 4000 Series CK4851 Grade 1 entrance/office lock with a conventional cylinder pairs with the CK4310 passage. The Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for 1-3/8 to 1-3/4 inch doors.
19) What passage knobset compares to the Waverly if a Grade 2 rating has to be on the submittal?
The Emtek Waverly passage knobset is a residential brass set. Where the submittal calls for a Grade 2 passage knob, the Dexter C2000 passage ball knob, the Corbin Russwin CK4410 passage/closet lock, and the Falcon W101, which is fire rated with a 2-3/4 inch backset, all carry Grade 2. Bravura offers Grade 2 passage knobsets in decorative trims - the Albany and Lynchburg with round trim, and the Dallas with rectangle trim in US4 Satin Brass.
20) Is the Omnia 434/PA a direct swap for the Emtek Waverly passage knob?
They are close but not identical. The Omnia 434/PA is a traditional egg-shaped knob latchset in solid brass with a passage/hall/closet function and a 3 inch projection, so the knob shape and projection are fixed. The Emtek Waverly is a solid brass passage set where the rosette is chosen separately from Lancaster, Ribbon and Reed, or Rope, and the latch can be a standard latch, a 28 degree rotation latch, or the CF mechanism that leaves no exposed screws on the rosettes. Confirm knob profile and rosette pattern before treating one as the other.
How fast can I get the Emtek 8107.W.US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8107.W.US15 come with a warranty?
Absolutely. The Emtek 8107.W.US15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8107.W.US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8107.W.US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!