Emtek Flat Track Sliding Door Hardware - Steel

The Emtek steel flat track system carries a door up to 200 lbs. The wall or backing structure it mounts to has to be built to support up to 400 lbs, which accounts for the door plus the dynamic load of it running. On stud framing that means hitting solid blocking or a continuous mounting board, not drywall anchors. If your slab is heavier than 200 lbs, this is not the kit.

One kit gets you a pair of hangers with wheels, the stops, fasteners, the anti-jump mechanism, and a floor guide, plus the track in the length you pick. The door itself, the pull, and any wall mounting board are separate. If you are hanging two doors on one track, add the Double Door (DD) hanger kit. A Soft Open/Close kit is an option if you want the door to catch and ease in at each end rather than hit the stop.

Yes, by ordering the Double Door (DD) application option, which adds a second hanger kit so both slabs ride the same track. Pick your track length for the full travel of both doors, and remember each slab still has to be inside the 200 lb capacity. For a single door, choose the no-DD option and the standard pair of hangers is what ships.

The Delaney 1000 Series 6 Foot Standard Sliding Barn Door Hardware Kit is the nearest straight equivalent at that span. The Emtek steel flat track system comes in 5 ft, 6.5 ft, 8 ft, 10 ft, 13 ft, and 16 ft track lengths, so a 6.5 ft Emtek track is the closest Emtek length to Delaney's 6 foot kit. The Delaney 1000 Series kit fits doors 1 3/8 inch to 1 3/4 inch thick, which covers a standard interior slab; the Emtek system carries a Door Thickness entry so the slab dimension goes on the order.

The Delaney 3000 Series 6 Foot Low-Profile Top-Mount Sliding Barn Door Split Track Hardware Kit is the low-profile top-mount answer for a tight header, and it ships in a US19 black finish. The Emtek steel system is an exposed flat track that mounts with a face mount or top mount hanger in either a Classic or Modern Rectangular style, and it also offers Flat Black (US19) among its finishes, so the black tone can be held across both. The Delaney 3000 Series fits doors 1 3/8 inch to 1 3/4 inch thick.

No - the two solve different openings. The Pemko LP200A6 is a low profile concealed sliding door track system, 72 inches long, rated to 200 lb. Concealed means the track is hidden in or above the header rather than displayed on the wall, so it is the choice when the hardware should disappear. The Emtek steel system is an exposed flat track with visible hangers and wheels, offered in Solid (SD) or Spoked (SP) wheels and Classic (CL) or Flat (FT) fastener heads, where the hardware is part of the look. The Emtek track is rated for doors up to 200 lbs, matching the Pemko capacity, so the decision is appearance and header condition rather than weight.

Emtek lists this flat track sliding hardware as residential. For single family, condo interiors, and unit-side doors in multi-family it is the right class of product. For a commercial opening or anything on a rated or egress path, specify hardware sold for that duty instead.

Face mount hangers bolt through the face of the door, so the strap shows on the door front and is the traditional barn look. Top mount hangers attach to the top edge, which keeps the door face clean and drops the overall track height. Emtek offers both in Classic and Modern Rectangular styling. Top mount also matters when you are tight on wall height between the opening head and the ceiling, since the hanger stacks less above the door.

An anti-jump mechanism ships in the kit, which keeps the hanger captive on the flat track if the door gets shoved or lifted, and a floor guide is included to hold the bottom of the slab in plane so it does not swing away from the wall. Both are standard, not add-ons. The floor guide needs to land in the door's bottom groove or be attached at the floor in line with travel.

The Delaney 5000 Series Hanger Only kit ships hangers with mounting screws and no track, which is the right call when the existing track stays on the wall. Ordering the Emtek steel flat track system instead brings a complete assembly - one pair of hangers with wheels, stops, fasteners, anti-jump mechanism, and floor guide - so it suits a new opening rather than a hanger swap. Note that Delaney hangers are built to the Delaney 5000 Series geometry and are not an Emtek track component.

The Emtek steel flat track system handles the pair in one order: it offers a Double Door (DD) application option that includes the additional hanger kit, run on a single longer track from the 5 ft through 16 ft range. The Delaney 1000 Series is sold as a 6 foot standard single kit and the Delaney 3000 Series as a 6 foot low-profile split track kit, so a two-leaf opening built on those means matching kits per leaf. On the Emtek side the same finish - Brushed Stainless Steel (SS), Flat Black (US19), or Oil Rubbed Bronze (US10B) - carries across both leaves by default.

The Emtek steel flat track system is specified for residential use, and its Sliding Door Hardware series is built around exposed decorative hardware in Classic and Modern Rectangular hanger styles. The Pemko LP200A6 is a concealed sliding door track system rated to 200 lb in a 72 inch length, and Pemko's line is the direction to look when the opening is a commercial one. Confirm the door weight and header detail against the 200 lb figure either way.

Both can hang from the top of the door slab. The Delaney 3000 Series is a low-profile top-mount split track kit, meaning the track arrives in sections rather than one continuous length, and it comes in US19 black for doors 1 3/8 inch to 1 3/4 inch thick. The Emtek steel system offers top mount hangers in Classic or Modern Rectangular styles on a single flat track ordered at 5 ft, 6.5 ft, 8 ft, 10 ft, 13 ft, or 16 ft, with the wall or structure required to support a maximum door weight of 400 lbs. A split track changes how the header is drilled and how the sections are joined, so the mounting substrate should be checked before choosing.

They are appearance choices on the exposed hardware. Fastener Style is Classic (CL) or Flat (FT), which is the head profile you see on the face of the door and track. Wheel Style is Solid (SD) or Spoked (SP), the visible roller on the hanger. Spoked reads more agricultural, solid reads cleaner and more contemporary. Neither changes the capacity or the mounting.

Emtek puts this flat track hardware in its American Classic styling, and the finishes (Brushed Stainless, Flat Black US19, Oil Rubbed Bronze US10B) are the same finish names Emtek uses across its knobs and levers, so a run of barn doors can be specified to match the passage and privacy sets in the same units. Pick one hanger style, Classic or Modern Rectangular, and hold it across the job so replacement parts stay consistent later.