Emtek Hammered Oval Cabinet Pull, Schaub Collection

The Hammered Oval pull spans 3 inch to 12 inch center to center across the range, so it covers everything from a small drawer front to a full appliance or pantry door. Measure hole to hole on the existing pull and match that number; if your drawer is already bored, the spacing is what has to line up, not the overall length.

It is classified residential. For kitchens, baths, custom millwork and unit renovations it is the right kind of part. For heavy commercial casework, drawer pulls listed for commercial use are the better call, such as the Trimco 553 Series at 3 inch center to center or the Trimco 562 Series in 3-1/2 inch, 4 inch and 96mm spacing.

The Emtek Hammered Oval Cabinet Pull is a brass pull in an Arts and Crafts style with a hammered oval body. For a plainer modern profile at the same 3 inch center-to-center spacing, the Trimco 553 Series drawer pull is offered at 3 inch ctc, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch. Both trade the textured oval form for a straight bar or square-edged shape.

The Emtek Hammered Oval Cabinet Pull covers center-to-center spacings from 3 inch to 12 inch, so a 4 inch pattern falls inside its range. If a forged modern profile is preferred instead, the Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, and the Trimco 562 Series offers 3-1/2 inch, 4 inch and 96mm ctc options.

Four: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Unlacquered Brass (US3NL) and Satin Brass (US4). Oil Rubbed Bronze and Unlacquered Brass are the two that will change over time with use; Satin Nickel and Satin Brass hold their look. If you are matching other Emtek hardware in the room, match by the US code rather than the finish name.

The smallest size is 3 inch by 1-3/4 inch. Because it is an oval rather than a bar, you need clearance in both directions, so the 1-3/4 inch dimension has to sit within the face of the drawer front or rail without crowding the edge.

The range runs up to 12 inch center to center, which is the territory of appliance and tall pantry doors. If you need a dedicated appliance pull in a different look, the Schaub 79-8 Steamworks 8 inch pull is catalogued as an appliance pull.

No, they serve different jobs. The Emtek Hammered Oval Cabinet Pull is a surface-mounted cabinet pull. The Schaub 10010, 10011 and 10012 Sabre pieces are edge pulls, mounted at the edge of a door or drawer front, offered at 3 inch, 4 inch and 5 inch center-to-center respectively. Choose an edge pull only when the design calls for hardware at the panel edge rather than on the face.

The Emtek Hammered Oval Cabinet Pull is a residential cabinet pull in brass. For a refrigerator or range panel that needs a longer grip, the Schaub 79-8 Steamworks is an 8 inch cabinet pull built as an appliance pull. Appliance fronts generally take the longer pull for the hand clearance.

A knob mounts on a single hole rather than the two-hole spacing a pull uses, so it is not a drop-in for an existing pull pattern. The Emtek Hammered Oval Cabinet Pull spans 3 inch to 12 inch center-to-center. If single-hole knobs suit the doors, the Orca Hardware CK-15030 and CK-16030 Bachelor Collection round knobs are 1-1/4 inch diameter and the CK-17025 Blackcomb square knob is 25mm.

Arts and Crafts. The hammered surface and oval shape read as handmade, which is why it lands in Craftsman, bungalow, and rustic-transitional kitchens. If the room is contemporary flat-panel work, a smooth bar profile is a closer match, for example the Deltana SBP35 modern square bar pull at 3-1/2 inches or the Omnia 1968/102 forged brass pull at 4 inch center to center.

The Emtek Hammered Oval Cabinet Pull is brass through the substrate and is offered in Oil Rubbed Bronze US10B, Satin Nickel US15, Unlacquered Brass US3NL and Satin Brass US4. For a steel pull instead, the Orca Hardware CK-12001 T-Pull bar is steel with a 2 inch bar width in satin nickel.