You may also like
Emtek Modern Rectangular Flush Pull for Door Pull (Opposite Side)
The Emtek Modern Rectangular Flush Pull is the clean-lined opposite-side companion to Emtek's Modern Rectangular door pull. Heat-forged from solid brass and finished to match, it sits nearly flush with the door face — just 1/8" projection — keeping the contemporary aesthetic intact on both sides of the door. Available in two sizes to pair with 8" or 12" CTC door pulls, and in 10 finishes from Flat Black to Unlacquered Brass.
Features
- Designed to pair with Emtek Modern Rectangular door pulls (flush pull and door pull ordered separately)
- Available in two sizes: 2" × 10" (for 8" CTC door pull) and 2" × 14" (for 12" CTC door pull)
- Standard door thickness compatibility: 1-3/8"
- Minimal 1/8" projection for a near-flush, contemporary profile
- High-quality finish maintains appearance over time
- Supplied with matching installation hardware
Solid Brass Construction
Emtek flush pulls begin with raw bars of solid brass that are heated and pounded into specially made dies — a heat-forging process that produces a stronger, more substantial product than cast or stamped alternatives. Solid brass is heavier, smoother, and naturally resists corrosion, and the difference is noticeable the moment you hold it.
Specifications
- Size Option 1 (for 8" CTC Door Pull): 2" W × 10" H | Center to Center: 8" | Projection: 1/8" | Depth: 3/8"
- Size Option 2 (for 12" CTC Door Pull): 2" W × 14" H | Center to Center: 12" | Projection: 1/8" | Depth: 3/8"
- Material: Solid Brass
- Door Thickness: 1-3/8" standard
- Available Finishes: Oil Rubbed Bronze, Polished Nickel, Satin Nickel, Pewter, Flat Black, Polished Chrome, Polished Brass (Lifetime), Unlacquered Brass, Satin Brass, French Antique
Manufacturer Resources
Emtek Door Pulls Dimensions
Product Specs
- Subcategory:
- Pulls and Push Plates
- Collection:
- Modern Rectangular
- Product Type:
- Door Pulls
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Commercial/Residential:
- Residential
- Series:
- Modern Rectangular
- Theme:
- Contemporary
- Electronic:
- No
- Handle Type:
- Door or Appliance Pull
- MAP Policy:
- Yes
- Tags:
- emtek modern flush pull, brass barn door pulls, flush barn door pulls
- Product Shape:
- Rectangular
- Product Style:
- Contemporary
- Product Material:
- Brass
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 221710-US4 – Frequently Asked Questions
1) Which size Emtek Modern Rectangular flush pull goes with an 8 inch center-to-center door pull?
The 2 x 10 inch flush pull is the one that matches an 8 inch CTC Modern Rectangular door pull. If the pull on the other face of the door is 12 inch CTC, order the 2 x 14 inch flush pull instead. Size off the center-to-center of the pull you are pairing with, not off the door stile, since the flush pull is cut into the door directly opposite it. Both sizes come in all ten finishes, so the pairing decision is only about length.
2) Can I use an Emtek Modern Rectangular flush pull on a sliding barn door or a pocket door?
That is what the low profile buys you. At 1/8 inch projection the pull is nearly level with the door face, so the door can slide past a wall or into a pocket without the hardware being the thing that hits first. Emtek sells it as a flush barn door pull for exactly that pairing: a full door pull on the room side, the flush pull recessed on the side that has to stay clear. Confirm the standoff of your track hardware against that 1/8 inch before you commit the cut.
3) Is a solid brass Emtek Modern Rectangular flush pull the right choice for a commercial entrance, or is there a better fit?
The Emtek Modern Rectangular Flush Pull is a solid brass, heat-forged piece classified for residential use, with a 1/8 inch projection and a contemporary rectangular profile. For a commercial opening that takes constant traffic, the ABH AB7200 is a solid stainless steel flat end pull handle, 7/8 inch diameter, with through-bolt mounting; the Ives 8103HD is a heavy duty straight door pull, 1 inch round, also through-bolted; and the Ives 8169 is a C style offset solid door pull, 1 inch diameter, with heavy duty mounting.
4) I need a graspable pull on both faces of the door, not a flush pull on the back side - what should I order instead?
The Emtek Modern Rectangular Flush Pull is built as the opposite-side companion to a Modern Rectangular door pull, sitting at 1/8 inch projection so the back face stays nearly flat. When both faces of the door need a hand-sized pull, the Deltana OHP620 Off-Set Handle Pull ships as a back-to-back set and carries a door thickness range of 1-1/8 inch to 1-3/8 inch, which takes in the 1-3/8 inch standard door the Emtek flush pull is sized for. For a longer back-to-back arrangement, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull set.
5) On a sliding barn door that runs tight to the wall, which pull will actually clear the wall?
The Emtek Modern Rectangular Flush Pull projects just 1/8 inch from the door face and recesses 3/8 inch deep, in a 2 inch by 10 inch or 2 inch by 14 inch plate, so it passes a wall the way a surface-mounted handle cannot. The surface-mount alternatives stand well off the face: the Ives 8102HD is a straight door pull on a 3/4 inch round bar with 1-1/2 inch clearance, and the ABH AB3310 is an offset flat end handle that surface mounts. Those two are the choice when the door face is open, not when it slides past a wall.
6) What finishes does the Emtek Modern Rectangular flush pull come in, and will it match the rest of my Emtek trim?
Ten finishes, and both lengths are made in every one of them: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4), and French Antique (US7). The finish codes are the standard US numbers, so ordering by code is the reliable way to keep the flush pull, the door pull, and the rest of the openings consistent across a house or a floor.
7) What is the difference between Unlacquered Brass and Polished Brass Lifetime on Emtek flush pulls?
Unlacquered Brass (US3NL) ships with bare brass exposed, no coating, so it darkens and develops a patina from handling. That is the intended look, and it is not reversible without polishing. Polished Brass Lifetime (US3) carries a protective coating that holds the bright brass appearance instead of aging. Both are the same heat-forged solid brass underneath. If a set of doors has to look identical five years from now, US3 is the one to standardize on; if you want the pulls to age with the house, US3NL.
8) What is the Emtek part number for the Modern Rectangular flush pull in Flat Black?
Flat Black (US19) is 221710US19 in the 2 x 10 inch size and 221714US19 in the 2 x 14 inch size. The numbering runs the same way across the range: 221710 for the 10 inch, 221714 for the 14 inch, then the US finish code. So Satin Nickel is 221710US15 or 221714US15, Unlacquered Brass is 221710US3NL or 221714US3NL. Quoting the full number with the finish suffix is what keeps the wrong length out of the order.
9) What goes on the push side of the door if a rectangular pull is on the pull side?
The Emtek Modern Rectangular Flush Pull is the recessed opposite-side piece for a Modern Rectangular door pull, at 1/8 inch projection in a 2 inch by 10 inch or 2 inch by 14 inch plate. If a flat push plate suits the opening better than a recessed pull, the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, the Trimco 1070 Series classic push/pull plates measure 3-1/2 inch by 15 inch, and the Trimco 1041 is a half-round push plate at 8 inch by 16 inch.
10) The largest Emtek Modern Rectangular flush pull is 14 inches overall - what covers a taller door pull than that?
The Emtek Modern Rectangular Flush Pull runs 2 inch by 10 inch for an 8 inch center-to-center pull and 2 inch by 14 inch for a 12 inch center-to-center pull. For longer hardware, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set, the Deltana SSPORBB24 is the 24 inch back-to-back round offset version, and the ABH AB3330 Series offset round end pull is offered with custom length options.
11) I want one contemporary pull on a single face of the door rather than a matched pull-and-flush-pull pair. What is comparable?
The Emtek Modern Rectangular Flush Pull is a contemporary rectangular piece intended to pair with a Modern Rectangular door pull on the other face, with the pull and flush pull ordered separately. If only one face gets hardware, the Deltana SSP1210 is a 12 inch contemporary pull built as a single-side unit, and the ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter.
12) The drawing calls out an ADA compliant door pull - which one meets that?
The Ives 8145 is a 45 degree offset door pull in the EZ series described as ADA compliant, supplied with heavy duty mounting hardware, and is the piece to specify when the drawing carries that callout. The Emtek Modern Rectangular Flush Pull is a residential solid brass piece at 1/8 inch projection, sized 2 inch by 10 inch or 2 inch by 14 inch to sit opposite a Modern Rectangular door pull.
13) Is the Cal-Royal PUL-175 an alternative to an Emtek Modern Rectangular flush pull?
They do different jobs. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, of stainless steel construction - it mounts at a rim cylinder on a night latch opening. The Emtek Modern Rectangular Flush Pull is a solid brass recessed plate, 1/8 inch projection, sized 2 inch by 10 inch or 2 inch by 14 inch to sit on the face opposite a Modern Rectangular door pull. One serves a locking function at the cylinder, the other is grip hardware.
How fast can I get the Emtek 221710-US4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 221710-US4 come with a warranty?
Absolutely. The Emtek 221710-US4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 221710-US4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 221710-US4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.