Emtek Urban Modern 8" Door Pull

Yes. The Urban Modern 86176 pull is ordered in three mounting configurations: standard thru-bolt with decorative caps, BTB (back-to-back), and CS (concealed surface). Back-to-back is the one to pick when you want a matching pull on each face of the door, and it changes the part number (BTB86176US15 in Satin Nickel, for example, versus 86176US15 for the standard mount). Pick the mounting on the order, not after it arrives.

Thru-bolt runs fasteners all the way through the door and finishes with decorative caps on the back face, so you see hardware on both sides. Concealed surface (CS) mounts from the face without exposed fasteners showing, which is what you want on a door where the opposite side is finished glass, a flush slab you don't want to break through, or where a second pull isn't going on. Standard mounting is thru-bolt with caps; CS is a separate order option with its own part number prefix.

Center to center is 8 inches, and the overall height is also 8 inches, so the mounting holes sit at the extreme ends of the pull body. If you're replacing an existing pull and want to reuse the holes, the old one needs 8 inch centers exactly. Drill the door to that spacing for a new install.

Yes, if you're thru-bolting or going back-to-back. Door thickness is asked for on the order because the fastener length has to match the slab. Measure the door before you order rather than after. Concealed surface mounting is the option that doesn't pass through the door.

The Emtek Urban Modern 8 inch pull is a brass, residential-rated pull with an 8 inch center-to-center spacing. For a commercial opening, the Ives 8103HD is a heavy duty straight door pull in 1 inch round stock with through bolt mounting, and the Ives 8102HD is a heavy duty straight pull using 3/4 inch round bar with 1-1/2 inch clearance. Both are built for the traffic a public entry or stairwell door sees, while the Emtek is styled for residential and light interior use.

The Emtek Urban Modern 8 inch is a straight pull with a 2 inch projection. For an offset shape, the Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware and is ADA compliant, and the Ives 8169 is a C style offset solid pull in 1 inch diameter with heavy duty mounting. The ABH AB3310 is an offset flat end pull for surface mount, and the ABH AB3330 is an offset round end version.

Projection is 2 inches off the face of the door, with a 1 inch wide grip. That's enough to get a full hand around it on a residential entry or interior door. If you need a pull sized to a heavier commercial opening with a specified clearance behind the bar, the Ives 8102HD gives 1-1/2 inch clearance on a 3/4 inch round bar.

Straight, with a 2 inch projection and a 1 inch wide grip in a contemporary square profile. An offset pull angles the grip away from the door at one end and is what you reach for when a lock or thumbturn sits behind the pull path. If offset is what the opening needs, the Ives 8169 is a C style offset solid pull at 1 inch diameter, the ABH AB3310 is an offset flat end pull, and the Deltana OHP620 is an offset handle pull sold as a back-to-back set for 1-1/8 to 1-3/8 inch doors.

The Emtek 86176 is an 8 inch pull only, both in overall height and center to center, so it won't scale up. For a longer run, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull and the SSPORBB24 is the 24 inch round offset version of the same. Deltana also has the SSP1210, a 12 inch contemporary pull for a single side. If you need a length that isn't a stock size, the ABH AB3330 offset round end series is offered with custom length options.

No. The Emtek Urban Modern is a graspable pull with a 2 inch projection off the door face, mounted thru-bolt. A push plate is a flat plate for the push side of the opening: the Trimco 1001-1 heavy duty push plate is 3 inch by 12 inch, and the Trimco 1041 half-round push plate is 8 inch by 16 inch. On a swinging door they pair rather than replace each other, pull on the pull side and plate on the push side. The Trimco 1070 series is a combined push/pull plate at 3-1/2 inch by 15 inch if one plate has to do both jobs.

Both are sold as back-to-back sets so a pull lands on each face of the door. The Deltana OHP620 is an off-set handle pull rated for doors 1-1/8 inch to 1-3/8 inch thick. The Emtek Urban Modern back-to-back version, ordered under part numbers beginning BTB86176, is a straight brass pull at 8 inch center-to-center and asks for the door thickness at the time of order.

The Emtek Urban Modern 8 inch pull is brass throughout, offered in finishes from Unlacquered Brass and Satin Brass to Flat Black and Polished Chrome. If the substrate needs to be stainless, the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting, and the ABH AB3300 is a straight flat end pull at 1 inch diameter. Both keep the straight bar profile.

Solid brass. Both the material and the substrate are brass, so the finish sits on brass rather than on plated zinc or steel. That matters most on the unlacquered brass (US3NL) option, where the surface is meant to age into a patina, and on coastal or high humidity installs.

Yes. The Emtek Urban Modern 8 inch is classified as a door or appliance pull, so the same brass part at 8 inch center-to-center serves a refrigerator panel or a tall cabinet as well as a passage door. The commercial pulls in the same size range, such as the ABH AB3300 straight flat end pull at 1 inch diameter, are built as door pulls for surface or through-bolt mounting on a full door rather than cabinetry.