Emtek Rustic Modern Arched Bronze 8" Door Pull

Three mounting choices, and they change the part number. Standard mounting is thru-bolt with decorative caps, so the fastener heads show on the opposite face under a finished cap (for example 86439FB). Back-to-back, prefixed BTB, pairs the pull with a matching pull on the other side and the two bolt through to each other. Concealed surface, prefixed CS, mounts from the face with no visible fasteners, which is what you want on a door where the back side is a closet or a cabinet interior and you do not want hardware showing through.

Order the back-to-back version, part numbers BTB86439FB, BTB86439MB, or BTB86439TWB depending on finish. That set gives you a pull on each face bolted to one another, so there are no exposed screw heads on either side. Ordering two standard 86439 pulls will not do the same thing, since each of those is a single-side thru-bolt with a decorative cap on the back.

The Emtek Rustic Modern Arched 8 inch pull is ordered back-to-back under the BTB prefix, for example BTB86439FB in Flat Black Bronze. Other back-to-back sets include the Deltana OHP620 off-set handle pull, a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, the Deltana SSPOBB24 24 inch back-to-back modern offset pulls, the Deltana SSPORBB24 24 inch back-to-back round offset pulls, and the Sure-Loc PL-2KN knurled long door pull in a double-sided configuration.

The Rustic Modern Arched arched pull is a sandcast bronze residential door or appliance pull. For a commercial opening, the Ives 8103HD straight door pull is a heavy duty 1 inch round pull with through bolt mounting, and the Ives 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance. If the opening also has to meet ADA, the Ives 8145EZHD is a 45 degree offset pull described as ADA compliant with heavy duty mounting hardware.

Give it if you have it. Door thickness is an optional entry on the order, and it matters most on thru-bolt and back-to-back mounting, where the bolt length has to suit the slab. Concealed surface mounting does not pass through the door, so thickness is less of a factor there.

Yes. It is catalogued as a door or appliance pull, so it is intended for panel-ready appliance fronts as well as doors. On an appliance panel, concealed surface mounting (CS prefix) is usually the one you want, since a thru-bolt would need to pass through the panel.

The Emtek Rustic Modern Arched pull is an 8 inch center to center pull, so on a tall entry slab it can look undersized. For longer runs, the Deltana SSP1210 is a 12 inch contemporary single-side pull, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls, square and round profile respectively. Sure-Loc also makes long single-sided pulls in knurled, round, and square profiles.

No, they solve different problems. The Emtek Rustic Modern Arched 8 inch is a bronze grip pull with 8 inch center-to-center mounting holes. The Trimco 1070 series is a push/pull plate measuring 3-1/2 inch by 15 inch, and the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch with no grip at all. The Trimco 1041 is a half-round push plate at 8 inch by 16 inch. Plates cover the face of the door and use a different prep than a two-hole pull.

The Rustic Modern Arched 8 inch bronze pull is a residential pull in the Rustic Living theme. For a restroom door in a public building, the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull built for that specific use. If you only need a straight commercial grip, the ABH AB3300 is a straight flat end pull with a 1 inch diameter and the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting.

Solid sandcast bronze, both the substrate and the material. Sandcast bronze finishes like Medium Bronze and Tumbled White Bronze are living finishes that darken and highlight with handling over time, which is the point of the Rustic Living look. If you need a finish that stays uniform, a stainless pull such as the ABH AB7200 solid stainless steel pull is the different direction.