Emtek Riviera Rectangular Cabinet Knob, Schaub Collection

The Emtek Riviera is a rectangular brass cabinet knob measuring 2 inches by 1-3/8 inches, so if the door fronts call for a round profile instead, the Deltana KRB175 is a solid brass round knob with a groove detail at 1-3/4 inch diameter. Both are brass; the difference is the footprint on the drawer face, rectangular versus round, and the Deltana is described as heavy-duty.

Yes. The Riviera measures 2 inches by 1-3/8 inches, which is a fairly broad face. For a narrower rail, the Schaub 10040 Cafe Collection modern oval knob is solid brass at 1 inch diameter with 7/8 inch center to center, and the Schaub 10030 Cafe is the same 1 inch diameter oval with a slot detail across the face.

Yes, a mounting screw is included with each Riviera rectangular knob. Cabinet knobs mount through a single bore in the door or drawer front, so no other hardware is needed unless your fronts are thicker than standard and you need a longer screw.

It's classified as residential. For hospitality millwork, office casework, or anything seeing heavy public traffic, look at a heavier-duty knob such as the Deltana KRB175, which is catalogued as a heavy-duty solid brass round knob at 1-3/4 inch diameter.

Knobs like the Riviera mount on a single screw and work on doors and smaller drawers. Wide drawers, deep pot drawers and anything you pull with a full hand are better served by a two-screw pull, which spreads the load and gives you a longer grip. Many kitchens run knobs on the upper doors and pulls on the base drawers. If you want a knob with a center-to-center dimension for a two-hole prep, the Schaub Cafe 10030 and 10040 are solid brass knobs listed at 1 inch diameter with 7/8 inch center to center.

Not a like-for-like swap. The Schaub 131 Artifex is a round cabinet knob at 1-1/2 inch diameter finished in Britannium, while the Emtek Riviera is a rectangular brass knob at 2 inches by 1-3/8 inches offered in Oil Rubbed Bronze US10B, Polished Nickel US14, Satin Nickel US15, Flat Black US19, Polished Chrome US26 and Satin Brass US4. Different shape, different material and a finish that will not match a US-numbered brass finish on adjacent doors.

The Emtek Riviera rectangular knob is styled Hollywood Regency. For a mission or craftsman elevation, the Orca Hardware CK-18032 is a round cabinet knob from the Mission collection. The Orca CK-19032 Whistler is another round cabinet knob if you want a different face treatment in the same round format.

It's a Hollywood Regency design with a contemporary read, rectangular rather than round. That squared footprint pairs with flat-panel and slab fronts and with other straight-line hardware. If you're after a traditional or rustic look instead, a round knob like the Orca Hardware CK-18032 Mission or the Schaub 131 Artifex in Britannium is closer to the mark.

A rectangular knob shows rotation in a way a round one does not, so alignment matters on install. Snug the single mounting screw from the back of the door with the knob held square to the stile or drawer edge, and add a thread-locking compound or a nylon washer if a door gets heavy use. The Riviera's 2 by 1-3/8 inch body gives enough leverage that a loose screw becomes obvious quickly.

Yes. Each of the six finishes is a single orderable item in the one 2 by 1-3/8 inch size, so a full-kitchen or multi-unit order is a straight quantity buy on one finish with no size or handing variables to sort out.

The Delaney 43701x is a solid brass cabinet knob if you want a straightforward brass knob without the Riviera's rectangular Hollywood Regency profile. The Emtek Riviera is also brass and ships with its mounting screw, so either one installs into a standard single-hole drawer front bore.