Emtek SELECT Brass L-Square Hammered Lever - Dummy Set

Yes, handing is a required choice. The L-Square Hammered dummy is offered left hand (LH) or right hand (RH), and a lever is not reversible in the field the way a knob is. Stand outside the door: if the hinges are on your left it is left hand, hinges on the right is right hand. Order the two leaves of a pair as one LH and one RH so the levers point away from the meeting stile.

No. A dummy set is a pull only, it has no latch, no spring return through a chassis, and no lock. If the door needs to stay shut, you want a passage function; a bedroom or bath needs privacy. The L-Square Hammered dummy is what you put on the second leaf of a pair or a closet door that a ball catch or roller catch already holds.

It is built and catalogued as residential hardware, so for a commercial corridor or anywhere a spec calls out an ANSI grade, go to a graded cylindrical dummy instead. The BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty, and the BEST 7KC Series 1DT is the Grade 2 medium duty version; the Accentra 455LN Augusta is a Grade 1 single dummy as well. The Emtek is the right choice on residential interiors, closets, and the inactive leaf of a French pair.

The dummy handles the inactive leaf only. The active leaf needs a real function, and for a matched look inside the same family you would take the same L-Square Hammered lever in a passage or privacy set with the same rose and finish. You will also need something to hold the inactive leaf closed, since the dummy does not latch: a flush bolt or a ball catch. If you want a commercial equivalent for the working leaf instead, the Baldwin Estate 5103 is offered in matching passage and privacy versions on the same 5048 rose.

The Emtek SELECT Brass L-Square Hammered dummy set covers 1-3/8 inch to 1-3/4 inch door thickness. For thicker leaves, the Hager 2510 Grade 2 passage lever and the Dexter C1000 asylum function Grade 1 lock both cover 1-3/8 inch to 2 inch, the Arrow GL01 Grade 2 passage lever covers 1-3/4 inch to 2 inch, and the Falcon K101 Grade 1 passage lever covers 1-3/8 inch to 2-1/4 inch.

The Emtek SELECT Brass L-Square Hammered lever dummy set is a residential brass dummy trim. For a heavy duty commercial opening, the BEST 9K Series 1DT single dummy trim cylindrical lever is a Grade 1 non-keyed heavy duty dummy, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever in the 5400 Series. Both are dummy function like the Emtek, so the door stays a pull-only leaf either way.

A dummy set has no latch at all, so a door that must stay closed needs a passage or privacy lock. The Baldwin Estate 5103 lever with the 5048 rose is offered in passage and in privacy function, keeping a decorative residential lever look. On the commercial side, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock, fire rated, for 1-3/8 inch to 2-1/4 inch doors, and the Hager 2540 is a Grade 2 cylindrical lock with the Withnell lever for 1-3/8 inch to 2 inch doors.

They are not the same order. The Emtek SELECT Brass L-Square Hammered dummy set is sold as a complete set and is ordered left hand or right hand. The Baldwin Estate 5103 half dummy with the 5048 rose is sold as a specific hand per part number, a left hand version and a right hand version, and a half dummy dresses one face of the door only. Confirm whether the opening needs trim on one face or both before ordering either.

No. The Emtek SELECT Brass L-Square Hammered dummy set is dummy function and surface mounts with no door prep required. A passage lever such as the Accentra 5301LN Augusta Grade 2, the Bravura Tampa with square trim Grade 2 passage leverset, or the Design Hardware X75 Grade 1 passage lever for 1-3/4 inch doors carries a latch and needs a bored door and a strike prepped in the frame. Ordering passage where dummy was intended means prepping a door that was never meant to be bored.

It ships as a complete set, and the rosette is part of the order rather than a separate line. You pick the rose shape from seven: Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire. The lever is the Hammered (HA) handle on the L-Square (LS) stem, so the only real decisions are rose shape, finish, and handing.

Seven finishes, and the rosette and stem finish together so the dummy matches the working sets on the other openings: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass is the one that will patina with handling rather than hold its shine, so keep it consistent across a run of doors if you want them aging alike.

On the decorative residential side, the Baldwin Estate 5103 half dummy with the 5048 rose is the closest peer, and it is handed the same way, sold as a left hand or a right hand unit. The Callan Bentley is a Grade 2 dummy lever if you want a graded one at a lighter duty than the BEST 9K. Where the Emtek separates itself is the option matrix: seven rose shapes and seven finishes on the same lever, so a whole house can be matched.

No. It is non-keyed and has no cylinder, and there is no tubular chassis behind it to take one, since it is surface mount. If you need a keyed opening in the same finish, specify a keyed entry set from the same series and key that one; the dummy stays a pull.

The Emtek SELECT Brass L-Square Hammered dummy set comes in Flat Black US19, Oil Rubbed Bronze US10B, Polished Chrome US26, Polished Nickel Lifetime US14, Satin Brass US4, Satin Nickel US15 and Unlacquered Brass US3NL, with Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford and Wilshire rosettes. If the latching doors are being done in another line, the Baldwin Estate 5103 with the 5048 rose runs passage, privacy and half dummy in one family, so the whole suite carries one lever shape.

The Emtek SELECT Brass L-Square Hammered dummy set is non-keyed. For the active keyed leaf, the Deltana 6201 Manchester and 6431 Linstead are entry function levers covering 1-3/8 inch to 2 inch doors, the Hager 2525 is a Grade 2 commercial cylindrical entry lock for 1-3/8 inch to 2 inch, and the Dexter C1000 entry/office is Grade 1 keyed for 1-3/8 inch to 1-3/4 inch.

Brass, both as the stated material and the substrate, so the finish sits on brass rather than on zinc casting. It is part of Emtek's SELECT Series in a contemporary style, with the hammered texture on the lever and a square stem profile.

Purely mechanical, no wiring, no battery, no power. If a keypad or code entry is what the job needs, that is a different product entirely, for example a Lockey 2835 mechanical pushbutton lever lock or a Delaney LP250 electronic keypad leverlock.