Emtek SELECT Brass R-Bar Hammered Lever - Dummy Set

Yes. The door thickness range is 1-3/8 to 1-3/4 inches, which covers both the common older interior door and standard 1-3/4 inch stock.

Yes, handing matters. The R-Bar Hammered dummy is built as Left Hand (LH) or Right Hand (RH) and is not reversible in the field, since a dummy lever is fixed and cannot be flipped. Stand outside the door: if the hinges are on your left it is left hand. On a pair of French doors you typically order one of each.

It ships as a complete set, lever and rosette together. You pick the rose shape when you order: Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, or Wilshire. Any brass rosette in the SELECT range can be paired with the R-Bar Hammered lever.

A dummy lever is a pull only. It does not turn, there is no latch and no spindle through the door, so the door has to be held shut some other way. A passage lever turns and throws a latch but never locks. If your door needs to latch, order a passage set, not the dummy. Emtek's SELECT range covers the passage function in the same R-Bar Hammered design; among other brands, the Baldwin Estate 5103 Passage lever with 5048 rose is a decorative equivalent.

The Emtek SELECT Brass R-Bar Hammered lever is a residential dummy set, so for a commercial opening look to a rated dummy trim instead. The BEST 9K Series 1DT single dummy trim lever is Grade 1 heavy duty and non-keyed, and the BEST 7KC Series single dummy trim lever is Grade 2 medium duty. The Accentra 455LN Augusta is another Grade 1 single dummy cylindrical lever, from the 5400 Series. All three are dummy function like the Emtek, so the door still gets a pull-only handle.

No. The Emtek SELECT Brass R-Bar Hammered set is non-keyed dummy trim and does not accept a cylinder. For a keyed opening, the Deltana 6201 Manchester lever is an entry function set covering 1-3/8 inch to 2 inch doors, the Hager 2525 is a Grade 2 commercial cylindrical entry lock for 1-3/8 inch to 2 inch doors, and the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway, keyed different, on a 2-3/8 inch backset.

The Baldwin Estate 5103 half dummy lever with 5048 rose is the nearest decorative match. Like the Emtek R-Bar Hammered set, it is a dummy function lever handed for a specific door, offered as BAL-5103-LDM for a left hand door and BAL-5103-RDM for a right hand door. The Emtek set is brass, ordered in Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel - Lifetime (US14), Satin Brass (US4), Satin Nickel (US15) or Unlacquered Brass (US3NL), and can be paired with Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford or Wilshire rosettes, so the Emtek route gives rosette-by-rosette control while the Baldwin comes fixed to its 5048 rose.

The Emtek SELECT Brass R-Bar Hammered set is dummy function, meaning it does not latch. For a latching interior door in a similar decorative vein, the Baldwin Estate 5103 is offered as a passage lever with the 5048 rose, and as a privacy lever with the same rose if the room is a bed or bath. On the more utilitarian side, the Callan Asheville is a Grade 3 passage leverset and the Bravura Miramar with round trim is a Grade 2 passage leverset in US4 Satin Brass.

That is the point of the SELECT Series. The dummy uses the same R-Bar stem, Hammered lever and rosette choices as the other SELECT functions, so a closet or French door dummy visually matches the keyed and non-keyed openings down the hall. Keep the finish code consistent across the job: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), or Unlacquered Brass (US3NL).

In the same decorative residential lane, Baldwin's Estate 5103 half dummy lever with the 5048 rose is handed the same way, ordered as a left hand or right hand unit. If you want a less expensive builder-grade dummy, the Callan Bentley is a Grade 2 dummy lever. The Emtek differs in that the brass lever and the rosette shape are chosen separately, so you can mix a Hammered R-Bar lever with any of seven rose styles.

Both are dummy function levers, so either one gives a fixed pull on a door with no latch. The Callan Bentley is a Grade 2 dummy lever from the Bentley series. The Emtek SELECT Brass R-Bar Hammered set is a brass residential set that surface mounts with no door prep required and suits 1-3/8 inch to 1-3/4 inch doors, and it is ordered by handing, left or right, with a chosen rosette. Pick the Emtek when the dummy has to match other Emtek trim on adjacent doors; pick the Bentley when a graded catalog line is what the spec calls out.

The Emtek SELECT Brass R-Bar Hammered dummy set is ordered as Left Hand (LH) or Right Hand (RH), so the door swing has to be confirmed before the order goes in. If a non-handed lever removes that risk on a mixed-swing job, the Falcon B101 is a Grade 2 cylindrical passage lever with a non-handed design and the Falcon K101 is a Grade 1 passage lock with non-handed levers. Both are passage function rather than dummy, so they latch the door.

The Emtek SELECT Brass R-Bar Hammered set is a decorative brass dummy that is chosen by rosette and finish. For a plain closet door where the handle just has to work, the Kwikset 200BRNL Breton passage lever is Grade 3 for 1-3/8 to 1-3/4 inch doors, the Kwikset 200DL Delta is a Grade 3 reversible passage lever with an adjustable 6AL latch and RCS strike, and the Accentra 5301LN Augusta is a Grade 2 passage/closet lever from the 5300 Series. All three latch the door, which the dummy does not.

Only if the door suits it. The Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever from the CL3100 Series, fire rated, and it covers 1-3/4 inch to 2 inch doors. The Emtek SELECT Brass R-Bar Hammered set covers 1-3/8 inch to 1-3/4 inch doors and surface mounts with no door prep. On a 1-3/8 inch residential door the CL3110 is outside its thickness range, and it is a latching passage lock rather than dummy trim.

Both the lever and substrate are brass. Unlacquered Brass (US3NL) has no clear coat, so it will darken and patina with handling. If you want the brass look to stay put, Satin Brass (US4) is the stable option. Polished Nickel is a Lifetime finish (US14).

Coverage depends on which rosette you pick, and the dummy itself mounts to the door face rather than through the bore. If you are replacing a latching knob or lever on a door that still needs to stay shut, a dummy is the wrong function anyway, since it does not latch. Use a passage set that fills the existing 2-1/8 inch cross bore.